Lights

To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector that allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included for flexible mounting options. Features - Lumen Output: 100 - 4 Modes with a Run Time up to 136h - 2 x AAA Alkaline Battery Powered - Weight: 82g - Battery: 2 x AAA Alkaline - Highly Visible up to 1 Mile - 100 Lumen Daylight Visible taillight - Water / Dust Resistant IP64 Rated Run Time - Fast Flash—96:00h - Pulse Flash—136:00h - Steady High—72:00h - Steady Low—127:00h

The Grid Front Light has four mode options, you can choose if you need high lumen power or extended run time. Ready for those commuting in the city, riding the open roads, or heading to their local trail. Grid Front Lights offer plenty of rechargeable power to keep you visible while out riding. - COB LEDS - Pack more LEDs in a small package with a powerfully even and wide light array to help you to be seen while riding in any environment. - ECO MODE - Extremely long run time in our Eco Mode for those riding all week, or on long daily rides. Eco Mode also extends the Pulse and Strobe modes by two hours. - USB-C - Modern USB plug standard to ensure you can stay charged and ready to ride - BATTERY GAUGE - Small color LEDs in the power button help you monitor your light battery power, to tel you when it's time to charge your light once more. Green = 100-50%, Orange = 50-25%, Red = 25-0% - MEETS ANSI FL-1 STANDARD - This standard was created by the American National Standards Institute (ANSI) to provide consistent performance measurements for handheld lights. - IP-65 - Ingress protection rating or 'IP rating', is a techy way to describe the level of water and dust proofness a product has. This light meets the IP-65 standard, which means is totally protected against dust/grit and is fully resist strong jets of water from all directions. - LIMITED LIFETIME WARRANTY - Restrictions and conditions apply.

The Grid Rear Light has four mode options, you can choose if you need high lumen power or extended run time. Ready for those commuting in the city, riding the open roads, or heading to their local trail. Grid Rear Lights offer plenty of rechargeable power to keep you visible while out riding. - COB LEDS - Pack more LEDs in a small package with a powerfully even and wide light array to help you to be seen while riding in any environment. - ECO MODE - Extremely long run time in our Eco Mode for those riding all week, or on long daily rides. Eco Mode also extends the Pulse and Strobe modes by two hours. - USB-C - Modern USB plug standard to ensure you can stay charged and ready to ride - BATTERY GAUGE - Small color LEDs in the power button help you monitor your light battery power, to tell you when it's time to charge your light once more. Green = 100-50%, Orange = 50-25%, Red = 25-0% - MEETS ANSI FL-1 STANDARD - This standard was created by the American National Standards Institute (ANSI) to provide consistent performance measurements for handheld lights. - IP-65 - Ingress protection rating or 'IP rating', is a techy way to describe the level of water and dust proofness a product has. This light meets the IP-65 standard, which means is totally protected against dust/grit and is fully resist strong jets of water from all directions. - LIMITED LIFETIME WARRANTY - Restrictions and conditions apply.

The NiteRider Swift 300 delivers everyday reliable performance in an economical ultra compact head light. Sporting features like an easy on and off handlebar strap mount, low battery indicator and to top it off, it's USB Rechargeable; making it the perfect light of choice for commuters and cycling enthusiasts. Although small in size, make no mistake; the Swift 300 packs a big punch with a maximum light output of 300 lumens! Powered by an internal Lithium Ion battery, in Walk Mode, the Swift 300 can run for up to twenty-seven hours before it needs a charge. - Highly durable design made with fiberglass reinforced plastic - Smooth 300 lumen beam pattern in an ultra compact and lightweight design - Innovative Collimator Lens – optimizes your field of view - Built-in, easy on and off handlebar strap mount - 4 Light Levels plus 1 Daylight Flash Mode - Fuel Gauge / Battery Level Indicator - FL1 Standard IP64, dust and water-resistant - Convenient USB rechargeable WARRANTY - The Swift 300 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Build-in, Handlebar Mount - USB Charging Cable

The Grid 2'fer is a high-powered front and rear light. A quick double-click of the power button switches it from white to red. With four mode options, you can choose if you need high lumen power or extended run time. Ready for those commuting in the city, riding the open roads, or heading to their local trail. Grid 2'fer offers the right light, front or rear, with plenty of rechargeable power to keep you visible any time of day. - COB LEDS - Pack more LEDs in a small package with a powerfully even and wide light array to help you to be seen while riding in any environment. - ECO MODE - Extremely long run time in our Eco Mode for those riding all week, or on long daily rides. Eco Mode also extends the Pulse and Strobe modes by two hours. - USB-C - Modern USB plug standard to ensure you can stay charged and ready to ride - BATTERY GAUGE - Small color LEDs in the power button help you monitor your light battery power, to tel you when it's time to charge your light once more. Green = 100-50%, Orange = 50-25%, Red = 25-0% - MEETS ANSI FL - 1 STANDARD-This standard was created by the American National Standards Institute (ANSI) to provide consistent performance measurements for handheld lights. - IP-65 - Ingress protection rating or 'IP rating', is a techy way to describe the level of water and dust proofness a product has. This light meets the IP-65 standard, which means is totally protected against dust/grit and is fully resist strong jets of water from all directions. - LIMITED LIFETIME WARRANTY - Restrictions and conditions apply.

NiteRider understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the “entry level” commuter lights are nothing more than “be seen” lights. Your overall safety and visibility should not be limited by your budget, that's why NiteRider created the Mako Series. The Mako line offers four models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. The Mako line is easy on the wallet and easy to operate. - Low cost, high powered light - Highly visible in traffic = keeps you safe - 3 light settings – High, Low and flash - Tough durable design - Lumen Output: 250 - Run Time: 12:30 – 28:00hrs - Weight: 175g - Battery: Alkaline AA x 2 WARRANTY The Mako 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Handlebar Mount - 2 AA Alkaline Batteries

The NiteRider Swift 500 delivers everyday reliable performance in an economical ultra compact head light. Sporting features like an easy on and off handlebar strap mount, low battery indicator and to top it off, it's USB Rechargeable; making it the perfect light of choice for commuters and cycling enthusiasts. Although small in size, make no mistake; the Swift 500 packs a big punch with a maximum light output of 500 lumens! Powered by an internal Lithium Ion battery, in Walk Mode, the Swift 500 can run for up to twenty-five hours before it needs a charge. - Highly durable design made with fiberglass reinforced plastic - Smooth 500 lumen beam pattern in an ultra compact and lightweight design - Innovative Collimator Lens – optimizes your field of view - Built-in, easy on and off handlebar strap mount - 4 Light Levels plus 1 Daylight Flash Mode - Fuel Gauge / Battery Level Indicator - FL1 Standard IP64, dust and water-resistant - Convenient USB rechargeable WARRANTY - The Swift 500 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Build-in, Handlebar Mount - USB Charging Cable

The NiteRider Bullet offers excellent rear light projection and daytime visibility with Optimal VIZ. Keep tabs on battery life with the integrated low power indicator. - 200-lumen output - Group Ride Mode—be seen without distracting fellow cyclists - Varying steady and safety flash modes - USB rechargeable - FL1 Standard IP64 Water Resistant

The NiteRider Sentry Aero 260 is a lightweight, aero taillight featuring dual LED light strips to deliver 260 lumens of Daylight Visible red light. An inner and outer lens design helps to shape light output, producing long-range visibility when viewed directly from the rear, but also providing ample surrounding light to the peripheral, making the Sentry Aero 260 visible from nearly any angle. - Daylight Visible Flash (DVF) - 260 lumen super bright tail light - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off Aero seat post strap mount with quick release tab - Aero seat post strap included - Convenient USB rechargeable - Super bright Daylight Visible Flash mode - Innovative Aero shape with excellent side visibility - FL1 Standard IP64, dust and water-resistant WARRANTY - The Sentry Aero 260 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light - Seat post Mount - USB Cable

Emax+ 150 is NiteRider's first taillight specifically made for electric bikes. It comes with a power line that's pre-wired for connection to the eBike's battery. Power line cable measures approximately 52" in length. Taillight powers ON with ignition/ power switch. Features six modes-Steady ON and varying flashes-with Built-in Mode Memory (remembers last setting). FEATURES - Lumen Output: 150 - 6 Modes - Hardwired, Voltage 6 to 80 Volts DC - Water / Dust Resistant IP64 Rated - Weight: 75 grams - Fits 22mm-34.9mm seat posts - Includes a pre-wired Emax+ 150 Taillight, Seat Post Clamp Mount, Rubber Mounting Shims, and Rack Mount LIGHT MODES 1) Fast Flash 2) Slow Flash 3) Disco Flash 4) Pulse Flash 5) High Steady 6) Low Steady NiteRider recommends this taillight be installed by an authorized e-bike service and repair shop.

Big things come in small packages and the NiteRider Lumina Micro 650 is the proof. The Lumina Micro 650 delivers a powerful punch with 650 lumens of light output, helping you to safely navigate your ride. Allowing you to see and be seen. As with all Luminas in the series, it features a low battery indicator – when the power button changes from blue to red color this indicates that there is approximately 15-20% battery life remaining. - All New Collimator Lens, produces a generous even widespread beam - Daylight Visible 650 lumen output head light - CREE LED at 6000k - Ride safely with Daylight Flash Mode! - 4 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable Handlebar Mount - Fits standard and oversize 35mm handlebars - Compact and lightweight design that's perfect for helmet mounting (Helmet Mount Sold Separately) - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY - The Lumina Micro 650 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - USB Charging Cable

The NiteRider Sentinel 250 is designed to increase cycling safety by way of 2 varying flash patterns and 2 steady beams (High/Group Ride Mode). Behind the durable red lens and casing are two powerful LEDs that emit 250 lumens in the brightest Daylight Visible Flash setting, allowing you to be seen day or night. For enhanced safety, the Laser Lane modes (3) are designed to project ultra-bright laser lines on the ground. This creates a virtual lane for the rider, further increasing visibility. - The Sentinel 250 complies with FDA standard for lasers, notice No. 50, 2007 - Daylight Visible Flash (DVF) - Highly visible laser lanes - All in one, Laser and tail light! - Convenient USB rechargeable - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - FL1 Standard IP64, dust and water-resistant WARRANTY - The Sentinel 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light w/ Laser Lanes - Seat post Mount - USB Cable

NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the Lumina Max headlight and Omega EVO 300 taillight wirelessly. Lumina Max headlight and NiteLink Remote sold separately. - Maximum 300-lumen output - Run time: 6:00—36:00hrs - Charge time: 2:15hrs - Group Ride Mode: Be seen without distracting fellow cyclists - 2 light levels, 3 flash modes - FL1 Standard IP64 Water Resistant - 79g Includes: - Daylight visible tail light, easy on/off seatpost strap mount, and USB charging cable

The Swift™ 500 gives you more than enough lumens at our lightest weight for headlights (82 grams). NiteRider® makes this headlight USB rechargeable for convenient on-the-go charging. The Swift™ 500 features a highly durable light housing with Dupont® Fiberglass reinforced nylon meeting all required FL1 Standards for impact testing and water / dust resistance. Vmax+™ 150 is NiteRider’s first taillight featuring COB (Chip-on-Board) LEDs, which for cyclists means it emits highly visible flash patterns in a smaller, more compact package. Its feather-like light weight makes it perfect as a wearable safety light—easily clipping onto straps, belt loops, and more. SWIFT™ 500 FRONT LIGHT FEATURES? • Lumen Output: 500 • 5 Modes with Run Times: 1:40 – 32:00h ?• Charge Time: 1:45h at greater than 500mA | 3:00h at 500mA • Water / Dust Resistant IP64 Rated • USB Rechargeable SWIFT™ 500 TYPICAL RUN TIMES Low - 10:00h at 150 Lumens Med - 3:40h at 250 Lumens High - 1:40h at 500 Lumens Flash - 12:30h at 500 Lumens Walk - 32:00h at 30 Lumens Vmax+™ 150 TAILLIGHT FEATURES • Lumen Output: 150 • 6 Modes with Run Times: 5:30-27:30h • Charge Time: 2:00h • Water / Dust Resistant IP64 Rated • USB-C Rechargeable Vmax+™ 150 TYPICAL RUN TIMES Fast Flash - 12:45h Slow Flash - 10:15h Disco Flash - 10:45h Pulse Flash - 7:00h High Steady - 5:00h Low Steady - 27:00h

Looking for our best selling Lumina series in a smaller and lighter package? Look no further than our Micro 900. NiteRider makes this headlight USB rechargeable for convenient on-the-go charging. Another feature of note on the 900, Intellicharge, which reduces your charge time in half—giving you more time riding and less time waiting. Its light weight at 130 grams makes it quite suitable as a helmet mountable option as well as bar compatible—standard and oversized 35mm diameters. - 900 lumen output - All New Collimator Lens, produces a generous even widespread beam - 4 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - High output light using a CREE LED at 6000k - Ultra lightweight 900 lumen head light, weighing in at only 130g including mount - Secure on and off-road handlebar mount - Fits standard and oversize 35mm handlebars - Small compact design that’s perfect for helmet mounting (Helmet Mount Sold Separately) - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 8-10 seconds to lock out operation of light. USB RECHARGEABLE The Lumina Micro 900 is USB Rechargeable. Another feature of note on the 900, Intellicharge, which reduces your charge time in half—giving you more time riding and less time waiting. Charge time is 2:30 hours, when plugged into a power source outputting over 500 mA and 4:30 hours when below 500 mA. MOUNTING OPTIONS Its compact profile and high light output make the Lumina Micro 900 ideal for helmet mounted applications, helmet mount available as an optional accessory. Or use handheld in Walk Mode for an amazing 60:00 hours run time. WHAT'S INCLUDED? - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fit up to 35mm - USB Charging Cable

Rando is designed for extended adventure perfect for dynamo setups, touring, commuting, and off-grid riding. Featuring all of the safety innovations of the Urban series, the high capacity lithium ion battery has enough juice to power the light for a full 3 hours on high and a mighty 24 hours in daytime pulse mode! For those that find themselves on extended adventure, Rando is the first high-visibility bike light that allows the light to trickle-charge while in use. Perfect for dynamo setups with a USB charger or an external battery pack, cyclists can now rely on powerful safety lighting even if conventional charging is unavailable. Reliable construction is a prime consideration for extended rides and Rando’s waterproof lighting platform has a certified IP67 rating – meaning the light is certified to withstand water immersion up to a depth of 1 meter. Ride with the added assurance knowing rain or shine the light will keep performing. Whether competing in endurance racing, bike packing across the country, or commuting over 3 hours a day with no place to recharge – Rando is the ultimate long runtime lighting solution. Features - 500 Lumen Output certified to the FL-1 Standard with high powered premium CREE LED - Rando will trickle-charge in low/pulse mode for all day illumination if integrated with a USB generator hub or external battery pack - Visibility is enhanced with bright amber side lighting providing maximum safety through intersections and high-traffic areas - Micro-peened reflector optimizes the beam pattern providing a smooth, even spot void of distracting hard edges - Multiple power settings include a one-touch High/Medium toggle to efficiently decrease intensity when full power is not needed - Multi-color battery indicator is driven by custom firmware to provide accurate battery status throughout entire runtime - Mounting is simple and effective with ultra-grippy rubber ensuring light doesn’t slip on regular or oversize handlebars - Waterproof design eliminates the leading cause of bike light failure – water immersion - Includes Rando specific Micro USB cable Specifications - Lumens: 500 (high), 250 (medium), 125 (low), 125 (pulse) - Runtime: 180 min (high), 360 min (medium), 720 min (low), 1440 min (pulse) - Beam Angle: 20° (spot) - Charge Time: 360 min

Light & Motion Seca Comp 1500, Light up the whole trail with 1500 lumens of power. Designed for trails, the Seca Comp is also a superior road light with 4 modes for night and day safety and vision. - 3 CREE LEDs deliver a high power spot beam plus a wide flood beam for broad and deep coverage. - Quick handlebar mounting and easy to switch between bikes. - 3 modes for trail use, plus 9 hours of daytime safety on the road with SafePulse mode. - Waterproof: 1 meter depth rating (IP67 standard). - Impact resistant: 1 meter drop tested (FL-1 standard). - Powerful side markers for road safety can be turned off for trail rides. - Race mode offers one touch high/med toggle. - Fast USB charging with advanced internal circuitry. - Accurate battery status indicator. - GoPro mount available.

The NiteRider Lumina 1200 Boost provides enough light that it can be used in just about all riding conditions, whether it be on the road, on your favorite mountain biking trail, or hand-held in Walk Mode. Specifically designed to meet the needs of riders in all cycling categories, the Lumina 1200 Boost features the Boost Mode light setting. Simply double click the power button, giving you the option to operate your light at maximum light output! And utilizing a CREE LED at 6000k, means you'll get what most consider to be the best LEDs available on the market today. These high performance LEDs are extremely reliable, with no filament to break or burn out. With the all new custom engineered collimator optics, the Lumina 1200 Boost projects a beam pattern that provides a generous widespread and even beam pattern of 1200 brilliant lumens! The high-strength head light body casing is comprised of lightweight aluminum and Dupont Fiberglass reinforced nylon that is highly durable. - All New Collimator Lens, distributes a generous even widespread beam pattern - Boost Mode, double tap power button to unleash maximum LED output at 1200 lumens! - 5 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Perfect for helmet mounting (Helmet Mount sold separately) - IntelliCharge – Reduce charge time in half! - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY -The Lumina 1200 Boost is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - USB Charging Cable

Taking the ultimate helmet lighting system – the Vis 360 – to the next level, the Vis Pro features an ultra-powerful 600-lumen headlight optimized for commuting and bright enough for twisty singletrack! The featherweight system is waterproof for all-conditions reliability and has an integrated rear light/battery pack that balances the unit on a variety of helmets. An essential setup for those requiring maximum protective visibility with powerful illumination. Featuring: - 600 Lumen Output Certified to the FL-1 Standard - Daylight Visible Pulse Mode - Integrated Battery Pack With Red Rear Lighting - Innovative Amber Sidelights Provides Critical Side Visibility at Intersections - Ultra-lightweight Setup With Easy Clip On/Off Design - Waterproof to 1 meter For All-Conditions Reliability - Accurate Battery Charge & Status Indicator - Micro USB Rechargeable Included: - Helmet Mounts & Micro USB Charging Cable

NiteRider Lumina Max lights light up the night and are daylight visible with Cree LEDs and Max Boost mode. They're high-powered and feature a rugged design made with Dupont fiberglass-reinforced plastic body with integrated aluminum heatsinks. Max series lights feature NiteLink wireless connectivity with the Omega 300 taillight. - NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the headlight and Omega EVO 300 taillight wirelessly. (Taillight sold separately) - Multiple light modes including varying Steady and Safety Flashes - Handlebar mounting (Up to 35mm) with Quick Release Tab for easy light removal - CREE LEDs—the highest-performing LEDs on the market - Compatible with NiteLink Wireless Remote Switch (Sold separately) - Lumens: 1500 - Battery: Li-Ion - Recharge Type: USB

Seca 1800’s powerfully focused beam and ultra-compact size reinvents the e-Bike light. Maximizing output without bulk, the Seca features an optimized reflector with 4 Cree LEDs. Designed to integrate into popular on-board batteries such as Shimano and Bosch systems, multiple mounting options creates the perfect e-Bike lighting solution. - 1800 Lumen output certified to the FL-1 Standard - Engineered with the best CREE LED and enhanced firmware. - Custom engineered reflector optimizes the light to provide a smooth, even beam pattern that focuses the light exactly where you need it. - Beam pattern was engineered to maximize riders’ depth perception using optics that eliminates the snowball effect with a clean transition across the beam. - Designed to seamlessly integrate into an e-Bike's 6V to 14V on-board battery

Epro 1000 is NiteRider's first headlight specifically made for electric bikes. It comes with pre-wired power line for connection to the eBike's battery. Power line cable measures approximately 52" in length. Headlamp powers on with ignition switch. Features two modes-Steady ON and Pulse Flash-with Built-in Mode Memory (remembers last setting). FEATURES - Lumen Output: 1000 - 2 Modes - Hardwired, Voltage 12 to 40 Volts 1.2 amps at 12v, 300mA at 40 volts - Water / Dust Resistant IP64 Rated - Weight: 166 grams - Fits 22mm-31.8mm seat posts - Includes a pre-wired Epro 1000 Head Light, Handlebar Clamp Mount, and Rubber Mounting Shims LIGHT MODES 1) Steady ON 2) Pulse Flash NiteRider recommends this headlight be installed by an authorized e-bike service and repair shop. Please reference your bike manufacturers manual for compatibility. Not compatible with 6 Volt systems.

The All New NiteRider Lumina Dual 1800 represents the next evolution of our best-selling Lumina headlight into a dual LED set-up that produces a far-reaching beam pattern with extensive peripheral illumination; making it the ideal choice for any riding situation or terrain. The Dual emits an amazing 1800 lumens while in Boost Mode, making it one of the brightest self-contained bicycle lights available today. Simply double tap the power button to set the light to Boost Mode. When in Boost Mode, the power button will illuminate red and blue to notify the user at a glance. The Dual is also equipped with side lighting to increase your visibility day or night. Tested, meeting an IP64 rating; The Dual 1800 is designed to be used in a variety of riding conditions because of its high resistance to water and dust. Its high-strength Dupont Fiberglass reinforced nylon body casing and aluminum heat sink are engineered for extreme resistance to cracking and abrasion. - All New Collimator Lens, distributes a smooth widespread beam pattern - Side lighting for increased visibility day or night - Long lasting 20 hour runtime at 100 lumens in Walk Mode - 5 Light Levels plus 2 Daylight Flash Modes - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Helmet mountable (Helmet Mount sold separately) - Fast 3 hour charge via the included AC power charging adapter - Low battery indicator - Extend your ride time, 6 hour runtime at 350 lumens in Low Mode - Boost Mode indicator, power button will light up red and blue - Boost Mode, double tap power button to unleash maximum LED output at 1800 lumens! - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY - The Lumina Dual 1800 is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - Dual LED Head Light - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - AC Power Charging Adapter

Light and Motion Seca Comp 2000, with a perfect combination of high power in a compact, two-battery integrated design, is able to achieve a powerful output without quickly fading. A penetrating LED array gives a powerful spot beam in conjunction with a diffused flood beam ideal for both road and trail use to provide an exceptional range of vision for rides. Amber sidelights and a daytime pulse mode ensure road visibility and a secondary button allows the side lighting to be turned off when on the trail. - 2000 Lumen output certified to the FL-1 Standard - Engineered with a 3 LED array using the highest level CREE LEDs - Sealed, waterproof design tested to 1 meter for all conditions reliability - Beam pattern was engineered to maximize visibility at high velocity with ample beam distance lead-time and the widest beam angle for the sharpest turns - Secondary Race Mode simplifies your settings to switch between high power with 2 hours run time and low power with 4 hours - Accurate battery status indication illuminates the power button with three different colors to clearly display remaining battery life with 4 levels - Run times: 1:30 – 9 hrs over 6 modes

NiteRider Lumina Max lights light up the night and are daylight visible with Cree LEDs and Max Boost mode. They're high-powered and feature a rugged design made with Dupont fiberglass-reinforced plastic body with integrated aluminum heatsinks. Max series lights feature NiteLink wireless connectivity with the Omega 300 taillight. - NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the headlight and Omega EVO 300 taillight wirelessly. (Taillight sold separately) - Multiple light modes including varying Steady and Safety Flashes - Handlebar mounting (Up to 35mm) with Quick Release Tab for easy light removal - CREE LEDs—the highest-performing LEDs on the market - Compatible with NiteLink Wireless Remote Switch (Sold separately) - Lumens: 2500 - Battery: Li-Ion - Recharge Type: USB