Child Seats, Trailers and Training Wheels
Add some flair and fun to kids' bikes with MSW Squeeze Horns. - Fits standard 22-26mm diameter handlebars - Approximately 3" wide
• QR Locking Hitch Pin for Adams Trail-A-Bikes
Quickly transfer Thule Yepp Mini between multiple bikes by using an additional adapter. Features - Perfect solution for families where two people need to transport the child - Compatible with both normal and most ahead stems (20-28mm diameter) - Quick and easy to install
Tool-less, 3-position training wheel installation/removal system. - Closed-cell foam tires - Tubular steel arms - Compatible with 2013-present Hotrock 20-inch models only
Allows Thule Yepp Mini to be installed on bikes with ahead stems. Features - Quick and easy to install
This part connects the trailer with a square tow bar to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch & Steel Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily to allow the rider to lay down the bike. Includes safety strap with retaining pin for use with the Standard Forged Hitch or Steel Hitch. If being used with the Classic Hitch the Classic Hitch Safety Strap (part 950067) will also need to be purchased.
Wald's 10252 training wheels are designed to mount on most single speed bicycles with 16- to 20-inch wheels and are intended for use by riders weighing up to 100 pounds. These training wheels feature new frame adapters that improve installation. The new frame adapters enable this wheel set to be mounted on bicycles with .75 and 1.00-inch rear frame tubes. The training wheels can also be mounted onto bicycles with 1.25-inch rear frame tubes when the frame adapters are not used.
Wald's 1216 training wheels are designed to mount on most single speed bicycles with 12- to 16-inch wheels. This model is intended for use by riders weighing up to 75 pounds.
Wald's 742 training wheels feature three slots on the brace arm allowing this wheel set to mount on most single speed bicycles with 16- to 26-inch wheels. The brace arms are designed to fit rear frames tubes up to .75 inches in diameter. This model is intended for use by riders weighing up to 125 pounds. - The Wald Training Wheels fit 16- to 26-inch bicycles. - The Wald Training Wheels support riders up to 125 pounds.
- Accessory for the Shotgun MTB seat - Allen key fixing for easy fitting, removal, and adjustment - 250mm in length, with rubber grips designed for little hands - Comes with inserts to fit 25.4mm, 31.8mm, and 35mm handlebar diameters - Suitable for flat or riser style handlebars - Your child will love riding up front when they have their own handlebars and grips to hold onto
Burley's Classic Hitch makes a great replacement for lost or damaged hitches. This replacement hitch attaches to the trailer's tow bar and switches easily between traditional bike frames.
Allows Thule Yepp Maxi to be quickly installed on any bike with a rear rack with a load capacity of 25 kg/55 lbs. Features: - Fits rear racks measuring 11-17 cm/4.5-6.7 in
Easily transfer Thule Yepp Maxi between multiple bikes by using an additional frame adapter. Features: - Quick and easy to install
The Rear Deck for the Spicy Curry or Boda Boda gives passengers a place to ride along or provides sturdy support for your cargo. Pair with the Bamboo Running Boards for a super stylish look to your cargo bike. - 5 Ply Bamboo - Weather resistant - Cut out for the Yepp Maxi child seat to attach directly to the rear deck - Quick 6 bolt attachment - Only compatible with Spicy Curry, Sweet Curry and the Boda Boda cargo bikes - We choose to use 3-ply Bamboo for some of our accessories because it is a durable and sustainable material. Bamboo requires little water or other resources to mature and grows quickly with Wolverine like healing capabilities. All of our Bamboo products have been tested for hazardous or harmful chemicals in congruence with EU REACH regulations and passed with flying colors. We are fully REACH compliant.
Stylish Bamboo Utility for Mundo LUX & Mundo Classic provides a sturdy platform for passengers and cargo. Now compatible with the Ring and Go Getter Bag and looks real fresh paired with our Bamboo Running Boards! - RING COMPATIBLE - Delivered with hardware - Easy Installation - 2-Year Warranty - Mundo LUX and Mundo Classic only! - Not compatible with the Yepp Maxi child seat, sorry kids - We choose to use 3 or 5-Ply Bamboo for some of our accessories because it is a durable and sustainable material. Bamboo requires little water or other resources to mature and grows quickly with Wolverine like healing capabilities. All of our Bamboo products have been tested for hazardous or harmful chemicals in congruence with EU REACH regulations and passed with flying colors. We are fully REACH compliant.
Thule's Axle Mount ezHitch enables you to attach any Thule bicycle trailer or bicycle compatible child carrier (sold separately) to the rear axle of your bike.
At Burley, we want to make sure that everybody has the opportunity to take a trailer with them on every adventure. The Burley Thru Axle is our solution to bikes equipped with a 12mm thru axle. Male threading on the end allows a hitch to be attached, and any Burley trailer can then be used with a thru axle bike. Features: - Official Burley adapter for bikes with 12mm thru axles - External male threading to accommodate the installation of our axle mounted hitch system - Quick and easy one-time installation
Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
Thule's Thru-Axle Hitch Adapter enables you to attach a bicycle trailer conversion kit (sold separately) to bicycles with a rear thru-axle.
Yes! A 12mm thru-axle adapter for BOB Trailers. These Robert Axles for BOB Trailers are specifically engineered to attach the proven BOB Trailer to your thru-axle-equipped bike. Take full advantage of your modern bike with 12mm thru-axles and harness the rigidity of the thru-axle to haul your BOB Trailer. Set out on any adventure, big or small. Great for off-road tours, trail building, hauling cargo, and more! - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The axle ends are stainless steel which allows for mounting of the BOB Trailer bobbins. - No special tools required. The design allows for wheel installation or removal using your standard 5mm hex wrench. - Please note: This axle does not come with the BOB Trailer bobbins (those are available separately). Or, you can reuse your bobbins from the stock BOB Trailer Quick Release that came with your trailer. - Designed, built, and quality tested in the USA. Proven around the world.
• 4 times greater strength • Fits seatposts from 25.4mm to 35.0mm • Retro fittable to all 15mm block, horizontal pin style Trail-a-Bikes • Fits late 1998 to present • Comes with 4 shims
A heavy-duty steel rear rack made for towing Burley trailercycles. Trailercycles come with this rack. Get an extra to enable use on another bike. Also compatible with older Burley trailercycles (Piccolo and Kazoo).
This heavy-duty steel rear rack is made for towing Burley trailercycles. Pick up an extra to easily switch your Piccolo or Kazoo trailercycle between multiple bikes. The Moose Rack includes rack stays and hardware to mount to your bicycle.
The Taxi offers a secure and convenient way to carry kids. Plus, washable padding, and rugged construction promise to keep moms, dads, and kids happy for many miles. The taxi includes a strong, lightweight, tubular aluminum Blackburn EX-1 rack that doesn't weigh your bike down. The Taxi's secure mounting system is easy to install and remove when needed, makingit easy to swap between bikes with the addition of a second rack. - Bright color for high visibility - Removable and washable thick, full-coverage seat pad - Enclosed foot wells with spoke guard - Additional security strap limits rearward seat movement - High sides and seatback with molded helmet rest
The iBert safe-T-seat provides families with exactly what they are looking for in a childrens bike seat; comfort, safety, an attractive and innovative design, and a good position where the child can fully explore the scenery. Nestled safely between the adult’s arms and behind the protection of the bicycle handlebars, the child can look around and be involved with the ride with mom or dad by turning the padded steering wheel.
The perfect way to get more out of your Burley, the Jogger Kit converts your Solo trailer to a jogger. This kit makes it easy for families to keep fit on the run. Compatible with the Solo (2007-Current)
- With your child riding shotgun, you’ll help foster a love of the outdoors and a passion for riding. The only problem you’ll have is getting them off it. - Designed for children 2 – 5 years (up to 22kg or 48lb) - Full rubber protection (for your alloy or carbon frame) - The shotgun seat has adjustable width, adjustable angle, and has a fully adjustable saddle. It fits top tubes from 30 – 68mm wide, and down tubes from 30 – 100mm wide. - Adjustable width to fit any frame size or shape - Adjustable angle to fit flat or sloping top tubes - Quick-release for easy fitting and removal.
• Plush gel padding • Fold-down grab bar, three point harness, reclining backrest • Quick release mounting system • Blackburn EX-1 tubular aluminum rack included • Compatible with Blackburn flashers and CPSC reflectors
The Captain’s Chair lets big kids and adults ride on the back of a GSD or HSD in comfort and style. Pair with the Sidekick Joyride Bars to create a complete passenger’s cabin for your favorite backseat driver. - Designed to fit one big kid (Recommended age: 8 or above. Recommended height: 130 cm or above. The HSD’s rear rack load limit still applies. Check the Passenger System page for more information) on the HSD when paired with the Sidekick Joyride Bars - Designed to fit one older kid (Recommended age: 10 or above. Recommended height: 140 cm or above. Check the Passenger System page for more information) or one adult passenger on the GSD when paired with the Sidekick Joyride Bars or the Sidekick Bars - Extra-thick seat-cushion and reclined backrest for a comfortable ride - Extended side rails for hand protection
- Your favorite Shotgun products, now in one combo package! - Includes the seat, the handlebar, and 2 exclusive items: One mudguard and one stem cap. ABOUT THE SHOTGUN KIDS MOUNTAIN BIKE SEAT: - Front mounted child seat for kids 2 – 5 years - Full rubber protection (for alloy or carbon frames) - Adjustable width and angle to fit all mountain bikes - Quick release fitting for easy installation and removal ABOUT THE SHOTGUN HANDLEBARS: - Accessory for the Shotgun Kids MTB seat - Allen key fixing for easy fitting, removal and adjustment - 250mm in length, with rubber grips designed for little hands - Comes with inserts to fit 25.4mm, 31.8mm and 35mm handlebar diameters - Suitable for flat or riser style handlebars
Page 1 of 2 Next page