Parts & Accessories
Your road shoes weren't made for walking, but that's just what you did. We can't blame you, though, especially when installing a Replacement Road shoe Heel Lug is so darn easy. Just install these on your S-Works Road shoes (2012 and earlier), and feel the tread under your feet again. - Replacement tread for S-Works 6 and Sub6 - Heel Lugs Only - Sold in pairs; with screws
Your S-Works Road shoes thanklessly accompany you through the toughest intervals in nature's worst conditions. Thank them and keep them ticking along with Specialized's Replacement Heel Lugs. These lugs replace the worn-out tread on your S-Works Road shoes. - Fits 2013 and 2014 S-Works Road shoes - Heel lug only - Sold in pairs; includes screws
Replacement tread for S-Works 7 Road shoes. - Heel Lugs only. - Sold in pairs with screws.
$15.00 $20.00 25% Off
Our best-selling shoe cover, this piece slips easily over road shoes to add warmth and wind protection for cool weather riding. Our AmFIB toe cover is the perfect answer to cool weather. Its softshell fabric offers terrific protection from wind and rain and is as easy to pull on as a sock. We have increased the stretch to accommodate wider shoes and sizes on the bubble. The opening is sized for any three-bolt cleat. - AmFIB Softshell provides superior wind and water protection. - Simple pull-on design. - BioViz reflective elements for low-light visibility. - For road shoes with external cleats.
Allows simple, removable, in-shoe adjustment to the forefoot varus and valgus angles for optimum foot, knee and hip alignment. - Reversible shims now work for right or left application - Vented for comfort - Package includes 2 pair varus shims (orange) and 1 pair valgus shims (yellow)
Replacement SL and SL2 shoe buckles, sold in pairs. - Sold in pairs - SL buckles for 2012 and prior shoes - SL2 buckles for 2013 and newer shoes - Low-profile - Replaces without tools
The replacement heel pad is for all EC90 SLX, EC90 ACC and EC70 outsoles. These outsoles are found on Empire SLX, Empire ACC, Factor ACC, Factress ACC, Trans E70 and Espada E70 shoes. The kit comes with left and right replacement pads and includes hardware.
All new external varus wedge fits between the cleat and the sole of your shoe for the perfect hip, knee and foot alignment. - External varus/valgus cleat wedge - Provides one-degree of varus/valgus correction - Shaped to fit SPD-SL, Look Keo and Speedplay - Package includes eight wedges
These replacement walking pads are easy to install, and bring your shoes back to original spec, so you can keep on movin'. These replacement walking and heel pads integrate with the Republic LX, Republic, Civila, Territory and Reveille shoes, and the kit comes with full left and right replacement pads and includes hardware.
$34.99 - $39.99 $39.99 - $49.99 Up to 30% Off
45NRTH's Jaztronaut are temperature-blocking insoles designed for cycling footwear. These insoles are constructed with a 2mm panel of non-compressible aerogel insulation laminated inside durable EVA foam. Aerogel is a porous nanotechnology that has been used by NASA to insulate astronaut spacesuits! It has super-high thermal performance and does not require loft to trap heat. Simply put, these insoles say no to cold cleats, and yes to warm feet, even under pedal load.
$34.99 $49.99 30% Off
Keep your feet dry and warm with Endura's MT500 Overshoes. Crafted from tough, waterproof Neoprene and suitable for MTB cleats, these booties feature waterproof rear zips for a great fit, as well as grooved rubber toe caps for durability and walking traction. There are also reflective details for enhanced visibility.
Body Geometry Footbeds are ergonomically designed and scientifically tested to increase power, endurance, and comfort by optimizing hip, knee, and foot alignment. With three different arch support options (Red+ being the lowest, Blue++ being in the middle, and Green+++ being tallest), you can be sure that every precious watt is preserved through the pedal stroke. - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Customized longitudinal arch and metatarsal support with Red+, Blue++, or Green+++ contour. - Proprietary lightweight foam avoids taking a compression set for long-lasting performance. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.
Giro's SuperNatural Footbed Kit offers adjustable arch support that optimize comfort and enhance pedaling efficiency. The kit combines a cycling-specific footbed with an adjustable arch support system so you can choose the amount of support you need for a custom fit right out of the box. The SuperNatural Footbed Kit is compatible with most manufacturers' cycling shoes.
$41.25 $55.00 25% Off
DO-IT-ALL DILUVIO We've taken our best-selling Diluvio C and Diluvio Allroad booties and modified, improved, and combined them into the all-new Diluvio UL. With improved fit and a better seal thanks to the neoprene enclosure at the top, large reflective rear tabs for visibility, and the flexibility to accommodate any type of cycling shoe, there's little this bootie can't handle. - 3mm neoprene for water protection and warmth - Velcro closure underfoot for the perfect fit - Bottom opening accommodates road, gravel or MTB shoes - Sealed seams - YKK zipper - Neoprene skins at cuff to keep water out
$45.99 $64.99 29% Off
Flat Pedal Friendly Mud Protection - Super tough, nylon faced neoprene upper with highly durable overlays - Novel, hardwearing rubber open sole for flat or clipless pedals - Aggressive rubber toe section tread for added grip - Rear Velcro closure with fit adjustment - Wide fit, suitable for varied MTB flat pedal and clipless shoes - Reflective trim - Clean shoes, clean lines, muddy trails - Tight fit = clean shoes - Due to the variety of shoe profiles check compatibility with your shoe by trying on before buying
Fend off darkness and soggy feet with Luminite II Overshoes. Crafted from seam-taped, waterproof fabric, these covers feature rugged Kevlar soles at the toe and durable flatlocked seams. They are suitable for all kinds of cycling footwear and cleats because they are fully open at the sole. The back heel features Velco fastenings for an adjustable fit. And, the Luminite II Overshoes are surrounded in 360-degree reflective trim for excellent visibility.
- Stretch waterproof PU fabric with taped center front seam - Extensive 360-degree reflective trim on front, side, and rear - Flatlocked seams for additional durability - Opens fully at sole and up back heel with Velcro fastening for an adjustable fit - Stretch aramid abrasion resistant sole and toe - Suitable for all kinds of footwear and cleats
$55.99 $69.99 20% Off
Keep your toes toasty in harsh conditions with Pearl Izumi's Elite Softshell Shoe Covers. Their 3-layer wind- and waterproof Softshell fabric makes these booties extremely warm. Plus, these fine covers have tall cuffs to seal out the elements, reflective accents for visibility, cleat cutouts in the durable Kevlar bottoms and 2-stage hook-and-loop closures for easy on/off.
$69.99 $100.00 30% Off
These GORE WINDSTOPPER overshoes with PrimaLoft insulation are for the coldest days. A full-length zip ensures you can get them on and off easily, while the flexible material and carefully contoured design will not hinder your pedal stroke. - Soft and versatile GORE WINDSTOPPER Product: windproof, water repellent and highly breathable - Insulation Protection: Integrated low-bulk insulation maximizes warmth while maintaining mobility - Zip tags for easy opening - Heel pull tab for easy on and off - Abrasion resistant material at sole and toes - Elastic cuffs - Adjustable Velcro strap on sole for perfect fit - Reflective details
For a little extra protection in the cold for your toes, slip on a pair of the Element Shoe Covers—they're the perfect winter accessory to ensure your feet stay warm and dry. - Soft Shell fabric provides resistance to both wind and water, without sacrificing anything to breathability, comfort, or layering ability. - Rear zipper closure securely blocks the elements from infiltrating the covers, while also easing entry and exit. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means that the covers are compatible with both road and mountain shoes. - Reflective elements increase your visibility to motorists in low-light conditions. - Fabric Content: MAIN: 44% Polyester, 38% Nylon, 14% Elastane, 4% PU; TOE & HEEL: 100% Polyester
$79.99 $99.99 20% Off
Designed for the nastiest, frigid conditions, the Pearl Izumi P.R.O. AmFIB WxB Shoe Covers transform your road shoes, allowing them to thrive year round. Primaloft Gold insulation and P.R.O. Barrier WxB fabric with an Outdry membrane provides waterproof, breathable coverage to keep feet toasty. Kevlar bottoms and rubber reinforcements on the toes add durability to the high-wear areas. The best part: Pearl's patented two-stage hook-and-loop closure makes these covers easy to put on and take off, while ensuring a snug fit against both your shoe and ankle. Features: - P.R.O. Barrier WxB powered by Outdry provides optimal water protection by bonding the waterproof, breathable membrane directly to the interior of the shell fabric - 100g Primaloft Gold insulation provides optimal warmth without bulk - Updated two-stage hook and loop closure provides both sleek fit and easy on and off - Anatomic paneling for a performance fit - Kevlar road bottom spreads open for easy on and off while providing superior durability - Recommended for road shoes with external cleats - Reflective elements for low-light visibility - Shell: 100% polyester; Insulation: 100% polyester; Bottom: 59% nylon 25% Kevlar aramid 16% polyurethane
Page 1 of 1