Skip to main content

Check the status of your order here | Online Orders

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Packs/Racks/Baskets

$3.99 - $5.99
• Vinyl coated hooks • 9 mm diameter • Black
$4.00
Buckle ("Mojave") 25 mm, 1 pc. (male and female) for all models up to '98
$5.99
Hypalon reflective patch that can be attached to any Brooks bag.
$7.99
These are simple polished stainless steel struts which can be used to mount many of our racks to your bike's brake bridge or fork crown. Available in Small and Large sizes. - Small is 8.5cm long from end to end - Useful for mounting our Constructeur Rear Rack to your brake bridge. - Useful for mounting our Constructeur Rear Rack to your brake bridge. Also used for mounting our Randonneur, Constructeur Front, and Porteur Racks to your bike's fork crown. - Note: not required if you mount the rack to metal fenders, as is traditional.
$8.00
For all models with the QL2.1 system. Planning a long bike tour and interested in playing it safe when it comes to securing your panniers? No problem. The screw set will help you make sure you'll be able to continue your tour with no loss of waterproof performance even if a few screws go missing. DETAILS: - 10 screws - 10 nuts
$8.00
For all Sport-Rollers, Front-Rollers and Sport-Packers with the QL1 system Is the bracket on your bike pannier with the QL1 mounting system broken? Simply replace the bracket to get your faithful pannier back in action. - Length 23cm - Hole spacing 7,5 - 6,5 - 7,5cm
$10.00
Compatible with Eco Rack - Extra long replacement stays for Eco rack - Length: 15.5"
$11.95
For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.
$11.99
Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum
$11.99
- Top quality synthetic woven construction - UV treatment for long term durability - Synthetic handlebar mounting straps - 24 x 16 x 15cm / 9.5 x 6.3 x 6-inches
$11.99 - $16.99
The Problem Solvers Seatpost Clamp with Rack Mounts is an ingenious adapter that gives you a super-secure and clean way to mount a rear rack on your bicycle. This light and durable aluminum piece simply takes the place of your seat tube collar. It includes a stainless-steel binder bolt and 2 5mm screws for rack attachment.
$12.00
- Stretch web secures those hard-to-hold items - Great for any rack - 4 easy-to-handle molded hooks attach anywhere - Dimensions 11" x 11"
$12.00
Common on European utility bikes, a front wheel stabilizer makes loading front racks simpler. It is a spring connecting the fork to the down tube. It adds a subtle self centering action to the front wheel, making loading and unloading of a bike with a basket, or say, our Porteur Rack much easier. The spring also offers some resistance to steering, so it counteracts deflections from hitting potholes and road debris. - Mounts to the back of the fork crown via brake bolt or through bolt - Fork crown mount diameter is made to fit an M6 bolt - common on nutted calipers - Use Sheldon's Fender Nuts to work with recessed brake bolts - Rust resistant and includes all required brackets and hardware - Available for Small (31.8mm and smaller) and Large (38-62mm) sized downtubes
$12.50 - $25.00
Surly Front Rack Hardware
$12.99
A stretch web net that helps secure items to a rear rack. - Four nylon molded hooks for rack attachment - Fits any rack - Dimensions: 11 x 11" - Custom-molded silicone - Stretches to three times its size
$13.00
Elastic strap with lower hook for Vario hybrid packs. Provides additional support for heavy loads.
$13.00
If you have unconventional handlebars (sold separately) but still want a bag with easy access when riding then pick up Ortlieb's Extension Mounting Set for the Ultimate5 handlebar bag (sold separately). It pushes the bag out front further than normal so you can still use your fun hand positions and enjoy the convenience of a handlebar bag.
$14.00
This water resistant cover protects your pack and its contents from the elements. Attaches securely with a hook and loop closure and drawstring. To attach the rain cover to your pack, pass the black elastic strap under your shoulder straps, then thread it through the Grey woven loop and attach the Velcro. Once it's attached, you can pull the drawstring at the bottom of the rain cover so it fits your pack snugly. Features - Bright yellow gives daytime visibility; reflectivity for low-light - Small / Medium fits Blowfish, Cloud Walker, Day Star, and other packs between 1000 and 1500 cu in or 16L to 25L - Medium / Large fits packs between 1500 and 2300 cu in or 25L to 38L - Includes three easy-to-use attachment points, plus a cinch system for secure fit
$14.99
Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum
$14.99
- Used for attaching rear racks to monostays or seatposts on bikes without traditional seatstays - Rubber coated steel for all weather durability
$15.00
For all models with the QL2 or QL2.1 system. If the standard mounting hooks are too small to fit on the tubes of your bike rack, simply replace the standard hooks with a set of 20-mm ORTLIEB hooks (cannot be used with inserts). DETAILS: - 2 QL2.1 snap hooks (20 mm) with adjustable handle
$16.99
Sunlite's Classic Flower Basket is just like the ones you remember as a kid. Made from weather-resistant plastic, it's tough, light and durable. It fits most handlebars and the flowers are removable. Carry your stuff in style.
$19.50
Tie-down with steel buckle perfect for attaching boxes, surfboards, guitars, tools, and other bikes to a Yuba. - Each strap 9 feet (3 m.) long - Industrial quality - Brown - 1 pair per pack - Compatible with all Yuba Cargo Bikes
$19.95 $24.95 20% Off
Fox's Small Seat Bag is large enough to hold a tube, multi tool, and a few other essentials. Made from durable poly fabrics. Velcro straps connect to your seat post as well as a cinch sack to keep everything rattle free. Design & Function: - Slim profile designed to fit underbike seat - PU coated, 600D polyester main body fabric - Easy attach hook and loop
$19.95
Omni QuickTrack Adapter attaches to a standard rear rack or Racktime* system platform allowing the use of popular Topeak TrunkBags and rear baskets. Adjustable mounting brackets fit rear rack widths from 90mm to 120mm with 10mm to 12mm rack tube dimensions. - Attachments: Rear rack deck - Material: Engineering grade polymer - Max Load: Limited to rack max loading rating - Size: 32 x 9.4 x 6.1cm - Weight: 230g / 8.11oz Compatibility - Fits rear rack without top plate and spring clip, - Rear rack width 90mm - 120mm, - Rack tubes, 10mm to 12mm diameter - Compatible with Topeak MTX / RX TrunkBags and MTX rear baskets *Racktime is a registered trademark of tubus carrier systems GmbH.
$19.99
Banjo Brothers' Handlebar bag is a great way to add extra carrying capacity to any bike. It conveniently attaches to your bars or even under your saddle with its easy-to-use straps. The rigid liner prevents sagging and there's a reflective strip protecting a 2-way zipper.
$19.99
- Top quality wicker construction - Treated finish for long term durability - Synthetic Leather handlebar mounting straps - Great for smaller or kids bicycles
$19.99
The Stem Bag is perfect for riders looking for quick access to items while on the bike. Originally made for riders needing to get to food items while riding, but can be used for cell phones, keys, and many other items needed while on the go. The bag attaches with two hook-and-loop closures, one mounting to the stem, and one mounting to the top tube of the bicycle. It is made with cordura and is lined with vinyl for added stiffness The Hook and Loop on the bag is generous to allow fitting of oversize frames—cut away excess on smaller frames. Specifications Small - Volume: 15.75 ci / .26 ltr - Dimensions: 3.5 x 3.5 x 1.5 (in), 8.9 x 8.9 x 3.8 (cm) - Weight: 1.5 oz/ 38 g Regular - Volume: 25 ci / .42ltr - Dimensions: 5.75 x 3.5 x 1.5 (in), 12.7 x 8.9 x 3.8 (cm) - Weight: 2.0 oz / 57g
$20.00
The Pannier Adapter is an accessory's accessory—but a very useful one. When using Cargo Hold 37 Panniers on your Tern GSD, the Pannier Adapter lets you install a child seat in the rear position of the rack and still attach the Cargo Hold 37's outer straps together, to make sure they are not dangling around while you are riding. Simple but effective. - Secures a pair of Cargo Hold 37 Panniers when used in conjunction with a child seat in the rear position on the GSD - Simple and robust design, made of durable nylon strap and Fidlock magnetic buckles - Quick and easy installation with Velcro fastening - Small and lightweight for convenient storage in the pannier pocket when not in use
$20.00
Our bikes and accessories were designed to help you carry stuff, but sometimes you just want to carry less. The Quick Release CMT is a quick-release bolt that makes installing and removing our Combo Mount-compatible racks easy, without tools, and in under a minute—so you can quickly change the bike setup if the rack is temporarily not needed, or reduce the bike package size to fit into smaller vehicles or storage spaces. - Designed for Tern bikes equipped with a Combo Mount - Easily install or remove front-mounted racks and accessories in under a minute - No tools required - Hassle-free option to switch accessories according to your needs
Page 1 of 9 Next page