Packs/Racks/Baskets

• Vinyl coated hooks • 9 mm diameter • Black

For all models from 1999 Need to replace a defective buckle? DETAILS: - 1 plastic, side-release buckle

Buckle ("Mojave") 25 mm, 1 pc. (male and female) for all models up to '98

Hypalon reflective patch that can be attached to any Brooks bag.

These are simple polished stainless steel struts which can be used to mount many of our racks to your bike's brake bridge or fork crown. Available in Small and Large sizes. - Small is 8.5cm long from end to end - Useful for mounting our Constructeur Rear Rack to your brake bridge. - Useful for mounting our Constructeur Rear Rack to your brake bridge. Also used for mounting our Randonneur, Constructeur Front, and Porteur Racks to your bike's fork crown. - Note: not required if you mount the rack to metal fenders, as is traditional.

Compatible with Eco Rack - Extra long replacement stays for Eco rack - Length: 15.5"

For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

Our Seatpost Clamps with rack mounts provide a stable spot to mount your rear rack stays to on bikes without seatstay braze-ons. Very handy. Also great for light mounts, a saddlebag stabilizer, or anything else you problem solving people tend to dream up. Unless you’re thinking about towing a jet ski with it. Let’s be reasonable. Tech Details - Available in 31.8 mm and 34.9 mm diameters - Alloy clamp - Stainless steel bolt - Threaded to accept standard M5 bolts

- Stretch web secures those hard-to-hold items - Great for any rack - 4 easy-to-handle molded hooks attach anywhere - Dimensions 11" x 11"

- Bike rack RR 290 mm strut kit with hardware - Great for smaller frames - 4 bolts & nuts - 1 set/bag

Surly Front Rack Hardware

A stretch web net that helps secure items to a rear rack. - Four nylon molded hooks for rack attachment - Fits any rack - Dimensions: 11 x 11" - Custom-molded silicone - Stretches to three times its size

Elastic strap with lower hook for Vario hybrid packs. Provides additional support for heavy loads.

This water resistant cover protects your pack and its contents from the elements. Attaches securely with a hook and loop closure and drawstring. To attach the rain cover to your pack, pass the black elastic strap under your shoulder straps, then thread it through the Grey woven loop and attach the Velcro. Once it's attached, you can pull the drawstring at the bottom of the rain cover so it fits your pack snugly. Features - Bright yellow gives daytime visibility; reflectivity for low-light - Small / Medium fits Blowfish, Cloud Walker, Day Star, and other packs between 1000 and 1500 cu in or 16L to 25L - Medium / Large fits packs between 1500 and 2300 cu in or 25L to 38L - Includes three easy-to-use attachment points, plus a cinch system for secure fit

For all models with the QL2 or QL2.1 system. If the standard mounting hooks are too small to fit on the tubes of your bike rack, simply replace the standard hooks with a set of 18-mm ORTLIEB hooks (cannot be used with inserts). - 2 QL2.1 mounting hooks (18 mm) and adjustable handle

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

- Used for attaching rear racks to monostays or seatposts on bikes without traditional seatstays - Rubber coated steel for all weather durability

For all models with the QL2 or QL2.1 system. If the standard mounting hooks are too small to fit on the tubes of your bike rack, simply replace the standard hooks with a set of 20-mm ORTLIEB hooks (cannot be used with inserts). DETAILS: - 2 QL2.1 snap hooks (20 mm) with adjustable handle

Sunlite's Classic Flower Basket is just like the ones you remember as a kid. Made from weather-resistant plastic, it's tough, light and durable. It fits most handlebars and the flowers are removable. Carry your stuff in style.

Tie-down with steel buckle perfect for attaching boxes, surfboards, guitars, tools, and other bikes to a Yuba. - Each strap 9 feet (3 m.) long - Industrial quality - Brown - 1 pair per pack - Compatible with all Yuba Cargo Bikes

Fox's Small Seat Bag is large enough to hold a tube, multi tool, and a few other essentials. Made from durable poly fabrics. Velcro straps connect to your seat post as well as a cinch sack to keep everything rattle free. Design & Function: - Slim profile designed to fit underbike seat - PU coated, 600D polyester main body fabric - Easy attach hook and loop

Omni QuickTrack Adapter attaches to a standard rear rack or Racktime* system platform allowing the use of popular Topeak TrunkBags and rear baskets. Adjustable mounting brackets fit rear rack widths from 90mm to 120mm with 10mm to 12mm rack tube dimensions. - Attachments: Rear rack deck - Material: Engineering grade polymer - Max Load: Limited to rack max loading rating - Size: 32 x 9.4 x 6.1cm - Weight: 230g / 8.11oz Compatibility - Fits rear rack without top plate and spring clip, - Rear rack width 90mm - 120mm, - Rack tubes, 10mm to 12mm diameter - Compatible with Topeak MTX / RX TrunkBags and MTX rear baskets *Racktime is a registered trademark of tubus carrier systems GmbH.

- Top quality wicker construction - Treated finish for long term durability - Synthetic Leather handlebar mounting straps - Great for smaller or kids bicycles

The Pannier Adapter is an accessory's accessory—but a very useful one. When using Cargo Hold 37 Panniers on your Tern GSD, the Pannier Adapter lets you install a child seat in the rear position of the rack and still attach the Cargo Hold 37's outer straps together, to make sure they are not dangling around while you are riding. Simple but effective. - Secures a pair of Cargo Hold 37 Panniers when used in conjunction with a child seat in the rear position on the GSD - Simple and robust design, made of durable nylon strap and Fidlock magnetic buckles - Quick and easy installation with Velcro fastening - Small and lightweight for convenient storage in the pannier pocket when not in use

Designed for use with the Yuba 2-Go Cargo Bags These little clips wrap around the Carry On Bars on your Spicy Curry to offer a third attachment point for the front of the 2-Go Bags, expanding the carrying capacity by at least 25% – that’s a lot of cargo! For installation with 2-Go Bags and Carry-On. Each order contains 6 Carry On Extensions (three for each side).

Find your bearings. The transparent map case protects your maps from moisture, mud, dirt and UV-light. Ideal for hiking, paragliding, canoeing or biking - your map is kept dry and readable from both sides. It may be carried around your neck or secured to your rucksack. - Available in two sizes (L and XL). - Waterproof and dustproof map case in two sizes - Two fastening strings make it ideally suitable for motorbiking, cycling, sailing, paragliding, caving or orientation runs - Size XL may be used for sea charts - With the four-point attachment system, the map can be easily secured to a backpack or boat/canoe - Can be worn around the neck with adjustable cord provided with 2 tankas - Transparent, UV-resistant material provides visibility of contents from both sides - Can be rolled and folded, since the material is flexible

Lezyne takes seatpack storage to the next level with their M-Caddy. Inside, fitted neoprene compartments organize your gear for easy access, while a durable, water-resistant zipper guards against moisture. Plus, a bottom compartment with a Velcro closure securely stores your multi-tool away from your spare tube, eliminating the possibility of a premature puncture. The M-Caddy also boasts a reflective taillight loop for safety.

WITH FEET, WITHOUT LOCK Our core element. Connects anything. Fix it with a click. Stable and secure. Open it with one touch. Ingeniously simple. No matter what you want to bring along: screw on Snapit 2.0, and it'll work. Includes mounting set. Maximum load 12 kg / 26.5 lbs. Attaches baskets and bags to a Racktime rack

Fix it with a click. Stable and secure. Open it with one touch. Geniously simple. No matter what you would like to bring along: fix Snapit on it and it’ll work. Including mounting set. For loads up to 12 kg / 26 lbs. Width variable (models from 2012 on).

This lightweight, water-resistant cover fits your Front Pannier perfectly and is designed to protect it from the elements.

Featuring fun, kid-friendly artwork in two designs, the handlebar-mounted bag puts items within reach of small hands. The two roomy compartments are perfect for stowing water bottles, gear, clothing, or such important finds as pinecones, seashells, and stones. Keep small riders refreshed and equipped during their outdoor adventures. - Mounts to either crossbar or handlebars - 2 hook-and-loop straps - 2 roomy compartments, 102mm wide each - 80mm thick x 204mm wide x 130mm deep - 10lb maximum weight capacity - Durable, washable cloth construction - Suitable for 12-inch wheels or larger

So you like to keep your rig running minimalist but practical? Maybe you prefer to tape a spare tube and CO2 to your frame to keep the profile and weight low? The Bandit is the best of both worlds in terms of simplicity and utility for mountain riders. Its compact form bolts under your SWAT-compatible saddle and features a simple Velcro strap with individual compartments for tube, CO2, and tire lever. One rip of the strap and you’re in, with easy to access everything you need to fix a flat in the middle of a race, when time is of the essence. - Tough, lightweight, water-resistant Velcro strap. - Uniquely designed to bolt directly under a saddle with SWAT-compatible mounts. - Individual compartments for a CO2 valve head, mountain tube, two-sided tire lever (included), and a 25g CO2 cartridge (not included) for compact and secure storage. - Tube, CO2 cartridge, and nozzle not included.

So you like to keep your rig running minimalist but practical? The Road Bandit is the best of both worlds in terms of simplicity and utility for road riders. The patent-pending Road Tube Spool was integrated into the design, making it extremely user friendly. Its compact form bolts under your SWAT-compatible saddle and features a simple, Velcro strap and securely holds your tube, CO2, CO2 nozzle and tire lever (included). One rip of the strap and you're in, with everything you need to fix a flat when time is of the essence. - CO2 valve head and two-sided tire lever snap into place for compact and secure storage. - Fits up to 80mm-long tube valve stems. - Holds a single threaded 16g CO2 cartridge. - Patent-pending Tube Spool allows the spare tube to be rolled up while protecting valve stem from rubbing a hole through the rubber. - Tire lever and CO2 head included; tube and CO2 cartridge sold separately. - Tough, lightweight, water resistant Velcro strap. - Uniquely designed to bolt directly under a saddle with SWAT-compatible mounts.

Top off the look of your child's cruiser with Sunlite's Willow Mini Strap-On Basket on the front! It attaches to the handlebars via handlebar straps and buckles for easy on and off. The tightly-woven willow ensures small items stay in the basket, and the retro design is sure to elicit compliments.

B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base

- Interface plates for luggage carrier rack to convert any non MIK ready carrier & non MIK ready bicycle bag to a MIK system (for use with Basil bags only) - Compatible with luggage carriers from 80 up to 150 mm - Carrier plate for rear racks that are not MIK ready. - Adapter plate for bicycle rear bags that are not MIK ready - Suitable for e-bikes - Max load: 26lbs/12kg

Together with tough materials, an internal pocket, and Blackburn's built-in reflectivity, the Grid Small is perfect for road cyclists. The Grid Small is big enough to fit a road tube, a multi-tool, 2 tire levers, and a CO2 inflator w/cartridge. - Tail Light Loop - Water Resistant Zippers - Retro Reflective Material - Robust, Abrasion-Resistant Outer - .45 Liter capacity - Weight: 55g

LM-BF 35 Fork Adapter, for forks without eyelets. Use with rigid forks* with a diameter from 25mm up to 40mm. For all Tubus lowriders except for Duo. *Please Note: Do NOT mount on suspension forks!

The Banjo Brother's large "gas-tank" style top tube bag is the bag you've been looking for. 65 cubic inches (1.1L) of storage front and center of your bike's cockpit. 50% larger than the original Banjo Brothers Top Tube Bag, this bag will hold a lot of what you need. Maybe that's food, or wallet, keys and phone. With a rigid bottom and padded sides the bag holds its shape and the main compartment zipper and side zipper are easy to use one-handed. Banjo Brothers used the same weather-proof zipper system that they use on their frame packs. The Large Top Tube Bag also features reflective piping for added visibility. Cut-to-fit straps means the bag will work on virtually any frame. The bag itself is not waterproof, but the fabric is waterproof and the zippers are covered. For the money the bag provides protection to satisfy riding in real-world conditions. It can also be attached at the seat-post. - Weight: 6 oz - Dimensions: 7" L x 4" H x 2.5" W - Capacity: 65 cubic inches / 1.1 liters - Rigid bottom and padded sides - Weather-proof zippers - Large main compartment and side pocket - Cut-to-fit-straps - Reflective piping - Imported

For those looking to carry a bit more, the Large Seat Bag is designed with a zip below to allow more room when needed. Large enough to hold two tubes, multi tool, energy bar, and other essentials. Durable poly fabrics. Velcro straps keep it secure on the bike and cinched up tight. Design & Function: - Slim profile designed to fit underbike seat - Expandable zipper for additional storage - PU coated, 600D polyester main body fabric - Easy attach hook and loop

Xlab's Mezzo Bag is the perfect seat bag for carrying and protecting your spare tubular tire (or 2 tubes), your inflator, and other essential repair items. The bag features a large main compartment and a zip pocket on the outside for easy access. It's made from tough woven nylon. It's easy to install with the hook-and-loop and buckled straps, and it works with both standard and aero seatposts.

- Robust 420D Nylon construction with strong zipper - Universal saddle compatibility thanks to Velcro straps - Reflective trim

The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads

BiKASE's Handy Andy holds all iPhones (in and out of cases), Androids, such as Motorola's Bionic and Razor, the Samsung Galaxy and many more phones. It quickly, easily and securely mounts with the neoprene Velcro straps. Simply wrap them around your handlebars, stem, frame top tube, or even your backpack for easy access to your smart phone while riding. No tools are required! This phone pouch makes calling or navigating with a GPS or training app simple. The see-through window allows viewing information while keeping your phone or device protected and lets you easily operate the touch screen and talk, too, with the phone in the case. A removable pad is included for those really thick phones. • Removable straps to use as cycling wallet. • Mounts on stem or top tube • Mounts on backpacks, messenger bags, strollers, grocery cart, etc. • Reflective logo • 2 Way Zipper Pull • Material: 840 denier nylon/TPU cover • 6.75 x 3.5 x 1-inches (fits iPhone 6+ and larger androids) • 100 grams

Get your payload out of your jersey and under the seat! Built with tough materials, an internal pocket, and retro reflective technology, the Grid Medium seat bag is big enough to fit 2 road tubes, a multi-tool, 2 tire levers, and a CO2 inflator w/cartridge. - Fully reflective side panels - Padded structure keeps its shape - Coated zipper, tail light loop, internal pocket - 21oz/0.6L/36cu in capacity - Welded seam construction - Anti-chafe straps - Weight: 70 grams

Add a rack to your frame, even if you don’t have rack mounts. This innovative design allows a standard rack to be bolted directly to the thru-axle for a clean and simple look. It's made from lightweight aluminum to keep weight down and durability high, and it features threads inside of the axle to install the lower mounting bolts. - 12x148mm axle fits all carbon and alloy Specialized mountain bike frames with Boost rear hub spacing.

Sure, you carry your typical list of ride essentials, like a tube and a multi-tool, but you need some extra room from time to time. If this sounds familiar, the Wedgie is the bag for you. It hides perfectly under your saddle, yet there's ample space to accommodate a tube and whatever else you see fit. And just to make sure that your belongings travel safely, it's designed to be water-resistant, plus it now fits on any bike with an updated mounting construction. Nylon upper is coated for water-resistance, ensuring that your gear remains dry when the weather turns ugly. PE Inserts added to keep the bag from shifting and moving around during your ride. Water-resistant zipper repels water and road debris coming off the rear wheel. Narrow profile tucks up into seat to reduce the risk of your thighs rubbing or chafing. Now fits on any bike with its updated mounting construction. Dimensions (cm): 5 x 5 x 16

The B-RAD pump bag protects your frame pump from water and dirt ensuring it is working when you need it. - Mounts to the B-RAD system or on its own - Dimensions: 12 in x 2.5 in x 2.5 in (30 cm x 6.5 cm x 6.5 cm)

The Stealth Pocket 200 mounts directly to your top tube on the bolt bosses found on some bike models. It has a 72 degree front that fits tight up against the stem to eliminate turbulent air pockets. The bag reduces drag caused by the stem and headset spacers (note: measure stem height to height of bag). The silver-colored interior makes it easy to see what’s inside quickly so you can turn your focus back to the road ahead. It features a specially designed insert to maintain the aero form of the bag to help you go that much faster!

Weatherproof from start to finish with a water resistant zipper and truck tarp inner liner, this resilient bag securely stores your essentials for a trail ride or a cross-town commute. The Mini Bike Bag is a must-have for anyone who wants a little more from their ride. Dimensions: 7"w x 3.75"h x 3.75"d Volume: 49 cu. in. / 1 L

The Mini Mountain Wedge Series offers seat bags that are designed to stand up to the rigors of serious on- and off-road cycling. - Large main compartment and small exterior zip pocket - The three-point suspension system consists of a seat post hook-and-loop strap and a 3/4-inch main webbing strap that threads over each seat rail - A side-squeeze buckle allows for easy removal - Made of Dupont Cordura - Weight: 99 grams - Capacity: 53 cubic inches

All Globe racks are made with T-channel aluminum rails to maximize versatility, capability, and creativity. Many of our Globe-branded accessories mount directly to these channels, but they will also accept just about anything you can imagine bolting to them. To help unlock that possibility, the Rack Customization Kit provides an assortment of bolts and T-nuts compatible with our front and rear rack rails. Just BYO milk carton, wine crate, cooler, you name it! Two T-channel rail pieces can be used to increase the effective dimensions of your rack to provide a more secure platform for large or awkward gear. - Compatible with Globe Haul ST and Haul LT rear racks, and Globe Front Rack. - Includes two rack extension rails, eight T-nuts, and 12 assorted bolts. - All tools required for assembly are included with the purchase of the Haul ST or Haul LT bike.

Easy to reach, bar-mounted feed bag that's always ready to let you scoff your face. Oh, there's room for tools, bear spray, wrappers too. But mostly food. We're cyclists and eating is what we do. Plenty of room for things that you want to get to quickly and easily while riding, including energy bars, trail mix—or a tube if you're not hungry. But who's ever not hungry on a trip? This bag has dull, sensible uses, too, it's not just for storing food. The outer mesh pocket will carry a lightweight jacket, a multi-tool or all of those new-empty wrappers. Ambidextrous fitting with adjustable straps allow you to run the bag left or right of the stem, depending on your handedness, luggage requirements or whims. The easy-to-use drawstring cinches up or loosens with one hand. - 1.2-liter capacity - Mesh pocket - Ambidextrous fitting with adjustable straps - Drawstring closure cinches up or loosens with one hand - Weight: 79 grams

Ortlieb's Ultimate6 Mounting Set uses an integrated lock to secure your Ultimate6 bag (sold separately) to your bars. Additionally, the lid of the Classic, Plus and Pro models can also be locked. Whether you need one to mount the bag on a different bike or simply want spare parts for a long tour, the mounting set is an indispensable part of the Ultimate6 system.

The RidePocket is a compact handlepost bag built to hold everything you keep in your pockets: wallet, cellphone, and keys. With the RidePocket you can cycle comfortably—no more sitting on your house keys. Since it’s intuitively organized, your essentials are right where you need them. It includes two zip pockets and an outer mesh pocket. The RidePocket includes a weatherproof rain cover, so you can push on through torrential downpours, and it’s built from durable 420 denier nylon. It mounts securely, but comes off easily, so you can bring it in with you when you lock your bike outside. - Designed to hold all your essentials (wallet, phone, keys, and more) so you can ride unencumbered - Intuitively organized for convenience - Mounts on the handlepost for accessibility - Fits all Tern bikes, and most folding bikes - Fits phones of all sizes - Includes handy rain cover - 1L volume capacity

The Seat Bag Tour M is a water-repellent seat bag for tubes and repair kits that offers all the familiar top quality and functionality that EVOC is known for in a compact, 0.7L format. - Very durable and water-repellent material - Water-repellent zipper - Hypalon reinforcement prevents tears from the seatpost's hardware and protects the seatpost's finish - Multipurpose compartment and additional mesh pockets - Integrated loop for tail lights - Easy & safe loop fixation

Lightship baskets are made from finely woven rattan cane, the outer skin of the natural rattan vine. These baskets are replicas of the Nantucket Lightship baskets first produced in Nantucket during the whaling era of the 1800s. Attaches to front handlebars with two leather straps. - Dimensions: 9.75" (L) x 5.75" (W) x 7" (H) - Maximum Weight Limit: 8 pounds

The Salsa EXP Series Anything Cage HD is a unique cargo mounting system that allows you to carry lightweight gear or large bottles on forks and down tubes that have Three-Pack mounts. - Versatile system designed for the Salsa Anything Cage Bag with EXP Series Rubber Straps (included) or nylon EXP Series Anything Cradle Straps - Constructed with glass-filled nylon for strength and durability - Holds gear low on fork blades or down tubes with Three-Pack mounts - Includes Anything Cage HD with hardware and two 20" Salsa EXP Rubber Straps - Maximum load: 6.6 lb (3kg)

Airfoil Shape bag large enough to fit phones up to 6.75" (172mm) diagonally. Includes inside pocket for small items. Has extra long front strap, ideal for standard stems. 3.3" high, 46 cu.ins (750cc) capacity. Includes hang tag to promote cell phone usage! Structured, strap mounted bag for standard stems fits cell phones up to 6 3/4" (171.45mm) diagonally and 6-8 gels. - Upgrade to a new, higher capacity top tube bag perfect for handling larger cell phones - Comfortably fits 6-8 gels along with cell phone, or 10 gels without a phone - Keep tablets or used gel wrappers separate in a handy inside pocket - Rubberized bottom keeps the bag in place - Avoid an overheated smartphone on those hot sunny days - bag interior is insulated! - Highly visible, silver colored interior makes it easy to see contents and stay focused on the road Keep Focused on the Road: Smarter Features for Easy-Access Storage - Wide access opening to easily remove and handle cell phone - Inside pocket for tablets, cash or sticky used gel wrappers - Large, easy-pull zipper for ease of access even when race day adrenaline is at its peak - Silver colored interior makes it easy to find contents - One-handed Super-Slide zipper Aerodynamic Design Tucks Right In Behind Stem - Structured shape perfectly optimized to tuck in behind stem and headset spacers without increasing frontal area - Extra long straps ensure security on all styles of bike configurations Contents Stay Cooler - Insulated sides keep your nutrition cooler