Parts & Accessories
$2.75 - $3.25
• Vinyl coated hooks • 9 mm diameter • Black
Buckle ("Mojave") 25 mm, 1 pc. (male and female) for all models up to '98
Stealth buckle set 25 mm, 1 set. (1 male and 1 female) for replacement closures on Back-Roller/Front-Roller top cross straps (all models '99 and above).
If you've worn out your plastic inserts on the top hooks of your QL2.1-equipped Ortlieb bag, good job! That means you're using your gear a lot. To freshen up that sweet mounting system, here are new inserts for three different rack tube diameters. Each set has 2 inserts to fit each of: 8mm, 10mm, and 12mm racks rails. Each set is enough to set up one Ortlieb pannier for any of these diameters.
• 24-inch long double strap • Vinyl-coated hook ends
Replacement stays for a variety of Tubus racks. Every roundstay is made out of solid aluminum, and they are available in various lengths and offsets. - 8mm diameter stay - Drilled for M5 bolts
QL2.1 lower anchoring hook, 1 Stuk, incl. mounting screws (for all QL2.1 models)
Stealth Buckle Repair Set. 25 mm, male and female housing with openings, 2 pcs. For replacement of buckles previously seated on a closed (sewn) loop of webbing.
Shoulder strap Ultimate RC, M, L from model '99 (length: 120cm)
- Bike rack RR 290 mm strut kit with hardware - Great for smaller frames - 4 bolts & nuts - 1 set/bag
Lower offset sliding plate - generally used as the lower mounting plate, regardless of the fork construction.
Jandd Mono-Stay Rack Adaptor is used for bikes that have a wishbone-style configuration on the rear end.
QL 1 Lower hook for model year 2010 and beyond. Mates to "half-moon" shaped lower rail art. # E176
Stealth Roll-Top Tension Strap Set
A stretch web net that helps secure items to a rear rack. - Four nylon molded hooks for rack attachment - Fits any rack - Dimensions: 11 x 11" - Custom-molded silicone - Stretches to three times its size
- Stretch web secures those hard-to-hold items - Great for any rack - 4 easy-to-handle molded hooks attach anywhere - Dimensions 11" x 11"
Are you trying to carry an oddly-shaped item on your rack? Sunlite's Bungee Cargo Net will secure it for the ride home. It is 13 x 13 inches in size and the 4 vinyl coated hooks help secure it to your rack.
For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.
- Clamp-set for seatstay mounting for 18mm - For mounting a rear carrier on seatstays without eyelets
- Clamp-set for seatstay mounting for 21mm - For mounting a rear carrier on seatstays without eyelets
Built from tough seatbelt webbing and a thick elastic strip, this cargo strap makes it easy to secure your gear. Use it a thousand different ways to make sure whatever you’re carrying stays with you all the way.
Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum
Elastic strap with lower hook for Vario hybrid packs. Provides additional support for heavy loads.
Surly Front Rack Hardware
This Tubus dropout extension adapter allows you to mount racks further back on the frame. It also allows you to mount traditional racks on bikes with disc brakes. - Weight: 66g - NOTE: This item is not compatible with any “EVO” Tubus racks
Lock your panniers to your rack with Ortlieb's QL2 Anti-Theft Device. Simply mount the steel cables on your bags with the included hardware and then securely lock them in place.
These handy adapters are for mounting a rack on bikes where clearance is needed for disc brake calipers or other accessories. - Screw them into the same holes on the dropouts for rack or fender bolts - Made from special hardened aluminum stock with a threaded steel insert - Best when only torqued to the same degree as rack bolts - Pegs are about .75" long - Can be used single sided or double sided - Sold in Pairs
$13.99 - $14.99
Jandd Rack Extenders are used for mounting rear racks to braze-on points or the mono-stay adapter. - Sold in Pairs
If you have unconventional handlebars (sold separately) but still want a bag with easy access when riding then pick up Ortlieb's Extension Mounting Set for the Ultimate5 handlebar bag (sold separately). It pushes the bag out front further than normal so you can still use your fun hand positions and enjoy the convenience of a handlebar bag.
Adapter for mounting the Topeak MTX rear basket to any MTX QuickTrack compatible rack.
Page 1 of 2 Next page