Your Search: "bar tape and grips"

The bar offers the same compact reach and drop dimensions as the Service Course SL-70 but adds a flattened top section for a natural ergonomic grip on the bar tops and a revised ramp angle for proper fit. The SL-70 Ergo's specially tuned drop shape creates comfortable hand positions with the short reach to control levers vital for race situations. The bar's 128mm drop help puts the rider low and in control without compromising comfort. Whether it's a rider with smaller hands or a bigger rider getting aero by pairing this bar with a long stem, this bar helps put just about any cyclists into their optimal position. - Distinctive Zipp cosmetics - 7050 aluminum for light weight and durability - 70mm reach and 128mm drop for a short-low position - Flattened top shape with 3° backsweep for comfort - Clip-on Compatible (40, 42, 44cm sizes only) - Lifetime warranty

Wolf Tooth Supple handlebar tape is extra thick, extra wide, extra soft, and extra tacky. Designed for the abuse of unforgiving trails. The 40mm wide tape can be tuned for additional thickness by wrapping with increased overlap. - Washable surface is resistant to wear and packing out - 5mm thick, 100% silicone is washable, resistant to wear and packing out - Self-fusing silicone finishing tape included for a clean finishing touch - Length: 152cm

The No.7 6F is our take on a modern performance drop bar. Sleek, ergonomically designed curves end in a wrist-friendly 6-degree flare at the drops. This gives just enough space to open your chest and provides forearm clearance in the drop position. This modern design offers seamless transitions between positions. The 6F features a slightly deeper drop than our 12F and 24F handlebars. Available in a complete size range so you can dial in your fit.

- Adhesive backed, 100% cotton, braided, reinforced edges

A casual riding handlebar designed so the grips flare out a bit 22.2mm (MTB size) bars accept MTB brake levers and clamp-on shifters. They do not work with bar end shifters. The only inverse levers that work are Dia Compe levers in the 22.2mm size

Velo Orange's Milan bar is so named because it's a great bar for converting an old Italian racing frame with a short top tube. Actually, it's great for converting any frame with a short top tube into a city bike. Folks who like a more aggressive position on a city bike will like it, too. The width is about 570mm and reach is 110mm; there is around 25mm (approximately one inch) of rise. The grips sweep back about 35 degrees, and the grip area is about 170mm long. The clamp area is 25.4mm. The material is polished aluminum alloy. Milan bars work with regular MTB (22.2mm) grips, brakes, shifters, 22.2 inverse brake levers, etc., but not bar-ends.

Velo Orange's Tourist bar is a "North Road" style bar rendered in polished aluminum alloy. It's similar to the bars used on many classic British roadsters. The clamp area is 25.4mm in diameter. The width is 570mm and the reach is 180mm; it has about 70mm of rise. They sweep back about 60-degrees, and the grip area is about 160mm long. The Tourist accepts regular MTB (22.2mm) grips, brakes, and shifters, but not inverse levers or bar-end shifters.

Remember those great Belleri Porteur bars from France? Of course Belleri is long out of business, but those handlebars are still sought-after. So, Velo-Orange decided to make their own Porteur bars. They are 480mm wide; reach is 140mm. The grip area is about 130mm, and they have about 15mm of rise or drop. The clamp area is 25.4mm. The quality and polishing are very nice. The transition from the grip to the curve on the originals was a bit abrupt; The Velo-Orange version has a gentler transition. The curves on both versions are fuller and, we think, prettier than the somewhat similar Champs Elysées bars used on the old Herse bikes. These bars are available in two tubing diameters, 23.8mm road-sized and 22.2mm mountain bike-sized (clamp area is 25.4mm on both): - 22.2mm diameter (MTB-size) bars accept MTB brake levers and clamp-on shifters. They do not work with bar-end shifters. The only inverse levers that work are Dia Compe levers in the 22.2mm size. - 23.8mm diameter (road-size) bars accept standard inverse brake levers, standard bar end shifters, and 23.8mm city brake levers. In short, anything made for road bars fits. They do not accept MTB levers or shifters.

The Klunker Bar will quickly become your favorite handlebar. These upright, chromoly handlebars are the perfect position for bombing dirt roads, a trek across town to visit the new coffee shop, and loaded touring. The Klunker is 680mm wide, has a comfortable 45° sweep, and 3" (7.6cm) of rise. The clamp diameter is 25.4mm and the grip area is 22.2mm - standard outer diameters for mountain and city brakes and shifters. Due to its design, you'll need a removable faceplate stem to work with this bar. Specs: Stem Clamp: 25.4mm Grip: 22.2mm Rise: 7.6cm Sweep: 45 deg Width: 680mm

Bling collection delivers the flashiest bar tapes for the flashiest of riders. Fusing performance and style, Supacaz delivers the only bar tape worth dreaming about. Silicone Gel dampens and eliminates all vibrations for the smoothest ride. Bling bling every time you ride around your city! - Eva Metallic (top layer): Fusion of metallic finish with the eva vibration dampening foam maximizes tackiness. Highly resistant to UV rays, climate, and sweat. - Kush Foam (middle layer): Exclusive compound that maximizes dampening via a nano amount of foam. Shock-absorbing qualities that drastically improve bike handling in the corners, downhill, and in rough conditions. - Silicone Gel: This backing provides additional comfort and vibration dampening. - Emboss: The tape is completed with the embossment of the beloved Supacaz pattern. The embossment creates the unique Supacaz look and wicks away moisture which maximizes grip. - Plush Hand Feel - Silicone Gel Injected 1 Set includes: - 2 Super Bling silicone gel tape rolls - 2 aluminum laser-etched Star Plugz (powder coated or anodized) - 2 High-end rubberized finish tapes

Super Sticky Kush is the bar tape of choice for 3x World Champion Peter Sagan. Fusing performance and style, Supacaz delivers the only bar tape worth dreaming about. We boldly claim that Super Sticky Kush is the best bar tape ever. Classic collection celebrates cycling with the most recognized colors. - Super Sticky PU (top layer): Superior hand feel with long lasting performance. Extremely tacky advanced polyurethane that remains tacky in wet conditions. Highly resistant to UV rays, climate, and sweat. Embossed with the sacred geometric Supacaz pattern that maximizes grip and tackiness. - Kush Foam (middle layer): Exclusive compound that maximizes the Kush feel from the thinnest amount of foam. Shock absorbing qualities that drastically improve bike handling in the corners, downhill, and in rough conditions. - Tackiest/best hand feel - Long-lasting PU tape - Laser-etched aluminum bar plugs - High-end rubberized finishing tape - Material: PU - Length: 2160mm - Width: 30mm - Thickness: 3mm

Super Sticky Kush is the bar tape of choice for 3x World Champion Peter Sagan. Fusing performance and style, Supacaz delivers the only bar tape worth dreaming about. We boldly claim that Super Sticky Kush is the best bar tape ever. StarFade will transform any bike into a head-turner with a blast of color and flashy graphics. - Super Sticky PU (top layer): Superior supple hand feel with long lasting performance. Extremely advanced polyurethane that remains tacky in wet conditions. Highly resistant to UV rays, climate, and sweat. - Kush Foam (middle layer): Exclusive compound that maximizes dampening via a nano amount of foam. Shock absorbing qualities that drastically improve bike handling in the corners, downhill, and in rough conditions. - Emboss: The tape is completed with the embossment of the beloved Supacaz pattern. The embossment creates the unique Supacaz look and wicks away moisture which maximizes grip. - Tackiest/best hand feel - Long-lasting PU tape 1 Set includes: - Two Super Sticky Kush tape rolls - Two aluminum laser-etched Star Plugz (powder coated or anodized) - Two high-end rubberized finish tapes

Specialized's S-Wrap Roubaix Handlebar Tape boasts a stylish suede finish and elastomer gel cushioning for awesome vibration damping and comfort.

Bling collection delivers the flashiest bar tapes for the flashiest of riders. Fusing performance and style, Supacaz delivers the only bar tape worth dreaming about. Signature Supacaz Oil Slick gives that perfect touch. Bling bling every time you ride around your city! - Bling PU (top layer): We’ve utilized exclusive materials to produce the most insane looking bar tape ever. Super flashy and extremely durable. - Kush Foam (middle layer): Exclusive compound that maximizes dampening via a nano amount of foam. Shock-absorbing qualities that drastically improve bike handling in the corners, downhill, and in rough conditions. - Emboss: The tape is completed with the embossment of the beloved Supacaz pattern. The embossment creates the unique Supacaz look and wicks away moisture which maximizes grip. - Star Plugz: Aluminum Bar Plugs, Screw & Expand (3mm), Anodized, Laser Etched logo - Finish Tape: High-End Rubberized Tape (Multi-Use), Supacaz Pattern Frost Print

World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more. - Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy - Material: MGR Super Six Alloy - Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm) - Diameter: 31.8mm - Rise: 5mm / 15mm / 30mm / 50mm - Length: 800mm (Adjustable to 740mm) - Geometry: 4° up x 8° back - Finish: Shotpeen anodized, decal logos

Flawless shifting, superb ergonomics, and state of the art technology? Shimano's Dura-Ace Di2 Dual Control Levers embody all of these concepts. Utter simplicity and ease of use are the hallmarks of these shifters, with gracefully curved lever blades that offer two, easy-to-reach fingertip buttons. The shifting controls are easily accessible from either the hoods or the drops, so you'll have total control from any position on your handlebar. The E-Tube wiring harness is simple, clean, totally waterproof, and runs beneath the bar tape for a super clean look.

Serfas' Synthetic Cork Bar Tape offers great comfort, grip and vibration absorption. This light, stretchy tape is easily installed thanks to the adhesive back and adds a touch of class to any bike. • Thin, Lightweight and Stretchable • Adhesive Backing for Easy Installation • Shock Absorbent • Washable

Serfas' ICS Bar Tape offers superior comfort and vibration absorption thanks to its 3-layer Infinite Comfort System (ICS). This light, stretchy tape is easily installed and adds a touch of class to any bike. • Gel Infused Tape • Comfortable Gel Backing • 200mm Length to fit Aero and Flat Bar Systems • Gel Backing Reduces Road Vibration • Washable

- Genuine perforated leather bar tape - Timeless aesthetics & durability - Asymmetrical hollowing keeps the overlap smooth, eliminating bulges - Vibration absorbing

Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance. They fit RED 22, Force 22 and RED 10-speed ErgoDynamic shifters.

Keep your bike looking good with SRAM's HydroR Lever Hoods. They're made of a soft, grippy rubber and are a great replacement hood for HydroR levers.

Wind is the ultimate cruelty, and nowhere is it more keenly met than at the leading edge of your bike. Want to save an easy 20 seconds over 40 kilometers? Get a set of Rapide handlebars. Leveraging our countless hours of Win Tunnel testing, we designed the Rapide bar to cut through the wind with knife-edge efficiency, and at the same time, provide the utmost comfort while hammering at the front. A textured surface on the tops ensures secure and comfortable grip, even when wet; there's a recessed step that sets the bar wrap flush with the tops; the airfoil is offset forward to offer greater forearm and knee clearance; and, at 225 grams, the Rapide is the lightest aero bar in its class. Aerodynamic performance without compromise. This is the leading edge. - Aerodynamically engineered to save 20+ seconds over 40km vs. a round bar - Optimized blend of high modulus carbon fiber materials yields lightest-in-class aero bar at 225g (size 42cm) - Innovative features, like textured tops and a smooth bar tape step, enhance your experience - Bend: 125mm drop x 75mm reach

A slightly modified profile gives the RaceFace Aeffect R handlebar the extra boost you’re looking for at high speeds. Built for tearing down your favorite trail...fast. Generous 780mm width to give you the stance and control you need. This is a no-nonsense, set-and-forget bar that is equally at home on your trail bike as it is on an enduro machine. Take your bike to the Rally level without breaking the bank. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 9°

Do you love to ride your mountain bike? Love boosting big airs, punishing the trails and your gear? You just want parts that can take a beating and won't let you down — the Chester 35 bar is made for you. These bars will last long after your bones, bruises and scrapes heal up and you're ready to tackle that gap jump that has had your number. - Manufactured from cold drawn, seamless 6061 Aluminum - Shot peened for increased fatigue life - 35 optimized triple butted design

The WING/10a offers great fit versatility - allowing the rider to fine-tune the grip height for their riding style and comfort preferences. The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. For optimal aero performance, the bar should be set in the low position to increase the separation from the armrests. Aero The Wing/10a employs a truncated airfoil (Kamm Tail) to stay within UCI regulations while offering the performance of a much deeper section. This, along with tidying up the underside of the wing where the cables used to exit has led to a small improvement in performance. For optimal aero performance the bar should be set in the low position to increase the separation from the armrests. Fit Data - The WING/10a is available in the following widths: 36, 38, 40, 42, 44 - The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. The grip length can also be trimmed by up to 30mm. - The WING/10a offers the greatest fit versatility of any alloy basebar we’ve previously made, allowing the rider to fine tune for their riding style and comfort preferences. - An additional reason for the truncated design of the wing was to improve hand comfort when sitting up on the bar tops

Pretty much everyone has lost the plugs from drop bar bikes. It's obnoxious. These plugs, however, have two elastomers that expand when tightened, keeping them secure within the bar. - Fit bars with 18-20mm inner diameters - Installs with a 3mm hex wrench - Outer diameter of plug measures: 25mm

• Four gel pads for under bar tape • Dampens vibrations • Maximizes comfort in all hand positions • For superior comfort use with Planet Bike Comfort Gel Tape (sold separately)

A low profile single lock on grip, designed to reduce arm pump and hand numbness. The Diamond knurled texture, with saw tooth finger ramps and a super tacky 20A compound provide ultimate traction. More traction means less death-gripping the bars and less arm pump. Our single lock has the profile of your favorite double lock-on. But to reduce hand numbness we've replaced the hard outer clamp with extra rubber for greater cushioning of your palm heel. Get all the benefits of an “ergonomic” grip without the city bike cruiser look! SPECS - Weight: 97g (Pair) - Length: 136mm - Diameter: 30mm

- Aluminum clamps secure the grip on both ends with a hex-broach pinch bolts - For 22.2mm (7/8") bars - Packaged for 1 pair/set of grips and includes Snap Cap end plugs

- Comfort: Soft and comfy just like your favorite chair - Our newest addition to the ODI line brings a welcome facelift to our iconic Longneck Lock-On grip - Constructed of our proprietary Soft Compound TPE material and featuring our legendary Longneck Rib Pattern, these grips provide exceptional comfort for all riding conditions - The addition of the new v2.1 Single-Clamp Lock-On system makes installation a breeze and ensures that your grips stay put no matter what the conditions - We have also designed these grips to be e-bike friendly with exceptional vibration dampening with or without gloves, the new small flange to protect hands, and new soft feel end with hard plastic reinforcement to prevent grip blowout - Large outer diameter: 31.5mm