This is how the employees at Yeti spec their personal bikes — 10mm more travel up front and a burlier shock in back — and this setup has been tried and tested on countless laps in the Colorado Front Range as well as stops on the EWS circuit. Yeti selected their favorite parts to withstand the chunky, rocky tracks in their backyard. With 160mm of Kashima-coated Fox Factory suspension up front and a Float DPX2 in the rear, this bike is built to take a beating. SRAM Guide RSC brakes with 180mm rotors and an X01 drivetrain ensure smooth shifting and ample stopping power. Rounded out with a Fox Transfer cable-actuated dropper, Ergon grips, and Maxxis tires, this rig is rowdy-ready.
|Frame||SB5 TURQ Series, 127mm travel|
|Fork||Fox 36 Factory, 160mm travel|
|Headset||Cane Creek 40 Inset Taper|
|Rear Shock||Fox Factory DPX2|
DT Swiss XM481 rims w/ 350 hubs
DT Swiss XMC 1200 30mm
(see Wheelset dropdown menu)
Front: Maxxis Minion DHF 2.5
Rear: Maxxis Aggressor 2.3
|Crankset||SRAM X01 Eagle carbon|
|Bottom Bracket||SRAM GXP BB92|
|Chain||SRAM GX Eagle|
|Rear Derailleur||SRAM X01 Eagle|
|Rear Cogs||SRAM 1275 10-50t|
|Shifters||SRAM X01 Eagle|
|Handlebars||Yeti Carbon 35x800mm|
|Stem||Race Face Turbine Basic 35x50mm|
|Brake Levers||SRAM Guide RSC|
|Brakes||SRAM Guide RSC hydraulic disc, 180mm rotors|
|Seat Post||Fox Transfer|
* Subject to change without notice.
The Lunch Ride. Our Process.
|Turquoise / Large / DT Swiss 350 hubs w/XM481 rims||B18SB5TLGPTUFXEG26600||35071|