700c

Since 2020, Rapide CLX wheels have won more races on the world tour than any other wheels, and we just made them faster. Meet the new Rapide CLX II. Combining the aerodynamics of a deep-section TT wheel with the light weight of a shallower climbing wheel and mixing in the superior efficiency and sublime handling of a tubeless system-the Rapide CLX II delivers maximum speed for real-world riding. We developed distinctly different shapes for the Rapide CLX II front and rear rims. The result is a wheelset that catches less drag than most 65mm wheelsets and brings a dramatic 25% improvement in stability over 50mm rims in wind gusts. The Rapide CLX II utilizes a hooked rim (allowing for real-world riding pressures up to 110psi, if that's your thing) for secure tire bead retention and an easier set up and mounting experience than ever before. All in a wheel that almost doubles current industry impact standards while managing to achieve the lightest weight possible. Our aeroflange hubs are aerodynamically optimized, with wide bracing angles for increased strength and reduced spoke weight. They also benefit from the reduced weight and increased strength of ceramic sinc bearings and the legendary durability of DT Swiss exp freehub internals. - Rim: Rapide CLX Carbon Clincher, 700c, Disc Brake, Tubeless Rim Details: 51mm Depth, 35mm External Width, 21mm Internal Width - Hub: Roval Aero Hub (AFD01/AFD02R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub - Bearing Type: DT Swiss SINC Ceramic Bearings - Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 18 count, DS: 257mm, NDS: 252mm; Rear: One-cross/Two-cross (2:1) 24 count, DS: 243mm NDS: 249mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 24mm—38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi) - Weight: Wheelset 1,520g, Front 710g, Rear 810g (including 15g, tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

Since 2020, Rapide CLX wheels have won more races on the world tour than any other wheels, and we just made them faster. Meet the new Rapide CLX II. Combining the aerodynamics of a deep-section TT wheel with the light weight of a shallower climbing wheel and mixing in the superior efficiency and sublime handling of a tubeless system-the Rapide CLX II delivers maximum speed for real-world riding. We developed distinctly different shapes for the Rapide CLX II front and rear rims. The result is a wheelset that catches less drag than most 65mm wheelsets and brings a dramatic 25% improvement in stability over 50mm rims in wind gusts. The Rapide CLX II utilizes a hooked rim (allowing for real-world riding pressures up to 110psi, if that's your thing) for secure tire bead retention and an easier set up and mounting experience than ever before. All in a wheel that almost doubles current industry impact standards while managing to achieve the lightest weight possible. Our aeroflange hubs are aerodynamically optimized, with wide bracing angles for increased strength and reduced spoke weight. They also benefit from the reduced weight and increased strength of ceramic sinc bearings and the legendary durability of DT Swiss exp freehub internals. - Rim: Rapide CLX Carbon Clincher, 700c, Disc Brake, Tubeless Rim Details: 51mm Depth, 35mm External Width, 21mm Internal Width - Hub: Roval Aero Hub (AFD01/AFD02R) Center Lock, DT Swiss 180 Ratchet EXP 36t internals (10 degs), 100x12mm & 142x12mm, Shim. RD. 11SP HG freehub - Bearing Type: DT Swiss SINC Ceramic Bearings - Spokes: DT Swiss Aerolite T-head, Front: Radial/One-cross (2:1) 18 count, DS: 257mm, NDS: 252mm; Rear: One-cross/Two-cross (2:1) 24 count, DS: 243mm NDS: 249mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 24mm—38mm; Max Pressure: 24mm-35mm: Tubeless (110psi) Tubed (130psi), 36mm-38mm: Tubeless (60psi) Tubed (60psi) - Weight: Wheelset 1,520g, Front 710g, Rear 810g (including 15g, tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - Extras: Roval Rim Tape, Spare Spoke & Nipple Kit, System Weight Limit: 275lbs/125kg

Where in the world can you ride these brutes? Anywhere you can think of. Road light, off-road tough, smooth as butter, Terra CLX EVO wheels bring leading-edge performance to the diverse needs of aggressive gravel rides. Durability delivered through unsurpassed toughness-to-weight, thanks to leading composite technology rims. Lifetime warranty and no-fault crash replacement. Specs: - Rim Type: Carbon Clincher, tubeless-first - Rim Material: Advanced Carbon Composite - Rim Width (internal): 30mm - Rim Depth: 25.3mm - Front Spoke Pattern: Radial/Two-cross (2:1) - Rear Spoke Pattern: One-cross/Two-cross (2:1) - Spoke Count: Front/Rear: 24/24 - Hub: DT Swiss Internals with Star Ratchet - Assembly Method: Handbuilt - Extras: Roval padded wheelbag, Roval tubeless rim tape and valves (pre-installed) - Weight (with rim tape and tubeless valves): 700c: 1357g

Following directly in the tire tracks of the Terra CLX, the new Terra CL utilizes the same super-light, incredibly tough rim as our flagship wheel. It's a hook-bead, 33mm deep carbon fiber rim with a 25mm inner width that plays well with tubeless setup and allows you to mount tires anywhere from 28mm to 47mm wide at whatever pressure you feel like running. In a nod to accessibility, durability and real-world serviceability, we opted to use ultra-dependable DT Swiss 350 hubs and lace them to the rims with DT Swiss Competition Straightpull spokes. The net effect of these changes is a wheelset that is almost as light as our incredibly light Terra CLX, offering close to the same benchmark performance but with more easily sourced spokes in the event of some back-of-beyond carnage, all with a price tag that is about half that of our flagship product. - Rim: Terra CLX Carbon Clincher, 700c, Disc Brake, Tubeless Compatible - Rim Details: 32mm Depth, 30mm External Width, 25mm Internal Width; ERD 577mm - Hub: DT Swiss 350 Straight-pull Center Lock, Star Ratchet 36t internals (10 degs), 100x12mm & 142x12mm, Shim. Rd. 11sp Freehub (Convertible freehub ) - Bearing Type: DT Swiss Sealed Steel Cartridge Bearings - Spokes: DT Swiss Competition Race Straightpull, Front: Two-cross (1:1) 24 count, R: 287mm, L: 286mm; Rear: Two-cross (1:1) 24 count, DS: 284mm NDS: 287mm - Nipple: DT Swiss Hex Prolock Al 2.0x14mm - Tire Size: 28mm - 47mm; Max Pressure: 28c-32c: 80psi, 33c – 36c: 65psi, 37c- 47c: 60psi - Weight: Wheelset 1,408g, Front 654g, Rear 754g (including tubeless rim tape and tubeless valve) - Assembly Method: Hand built at every step; from rim layup to the last nipple turn. - Extras: Roval Tubeless Rim Tape and Tubeless Valve, Spare Spoke & Nipple Kit - System Weight Limit: 275lbs / 125kg

At the helm of taking traction, stability, speed, and stiffness to new heights stands the Roval Traverse Fattie 38 650b wheels with 110mm front and 148mm rear hub spacing. And while their Boost-spacing axle widths give the frame and fork clearance and stiffness that results in a stiffer, stronger, and more durable system at a minor weight penalty, what turns them into descending machines is the 38mm internal rim width. The reason behind this is relatively simple: aside from the lightweight, ultra-rugged E5 alloy construction, the combination of the revolutionary width with wider hub flanges equates to an increase in plus-sized tire volume for more suppleness in the ride quality. Not only this, but the ample width also better supports the tire, meaning that you'll experience less "burping" when riding tubeless, as well as a drastic increase in traction. These aren't just a one-trick pony, however. At the front hub, you'll get a 15x110mm thru-axle (end cap options included), and at the rear, the 148mm hub features DT Swiss internals for lightning-fast engagement and acceleration. And to top everything off, these wheels are hand-built to ensure the perfect tension and a long lifespan. Whether you have just picked up a new plus-sized 650b bike, or you're curious to try out three-inch tires on your Boost- spaced 29er, the Traverse 38 Fattie 650b wheels will leave you impressed after the first spin. - Rim Type: Alloy clincher, Zero Bead Hook design, 2Bliss Ready - Rim Material: E5 high-strength alloy - Rim Width: 38mm internal - Front Spoke Pattern: Radial/Three-cross (2:1) - Rear Spoke Pattern: Three-cross (1:1) - Spoke Count: 24-hole Front, 28-hole Rear - Spoke Type: DT Swiss Revolution - Nipple Type: DT Swiss Pro Lock hexagonal - Front Hub: alloy body, 15x110mm thru-axle only—15mm end caps included - Rear Hub: CNC-machined alloy body, high-quality DT 360 internals, includes SRAM XX1 11-speed freehub and 148 end caps - Compatible with Shimano 10- and 11-speed freehub bodies—sold separately. - Bearing Type: Sealed cartridge - Assembly Method: Hand-built - Total Wheelset Weight: 1870g - No rider weight limit.

The best price on the market for a wheel meant to be ridden. Single-wall rims and loose-ball hubs that come out of the box round and true.

Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices.

Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices.

Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices. - Cartridge bearing hub with solid axle

This high-performance carbon all-arounder features a new, taller 45mm rim shape that minimizes drag. It also has a wider external diameter (28mm) that optimizes the aero performance of 25mm tires. Add in our UST technology, the most user-friendly tubeless road setup on the market, and a disc-brake specific build, and you have the most advanced, high-performance wheel for speed, puncture resistance, and smooth-riding comfort on the road. This updated wheel-tire system is now engineered with fewer spokes than the previous version (20 compared to 24) and those spokes feature a patented elliptical shape. As a result, overall weight has been reduced 70g with no compromises to stiffness or strength. Made specifically for disc brakes, the front spokes are crossed on each side of the hub to transfer the braking load to the ground without any flexing or wheel wobbling. The rear wheel has Isopulse lacing (radial on the drive side) for maximum power transfer. It's built on the Instant Drive 360 hub, which offers fast freewheel engagement and compatibility with any kind of frame. The wheel-tire system comes with Yksion Pro UST tires that provide a simple, hassle-free tubeless road setup with high rolling efficiency and maximum grip in all weather. Taller, wider rim profile improves aero efficiency - 45mm NACA rim profile, 28mm wide, optimized for 25mm tires, only possible when removing the constraint of the brake track - 20 elliptical spokes (patented) - New slick 12mm front hub Roll faster and smoother with a reduced risk of punctures - No tube, no friction: less rolling resistance and higher speeds - UST Road Tubeless lets you ride with lower tire pressure for a smoother ride quality. - Perfect union between tire and wheel, so installation, removal, and maintenance are easy Disc-brake technology gives added braking control - 20 spokes front and 24 rear for optimized brake torque distribution - Full axle and freewheel compatibility

A favorite for everyday road training and racing, this versatile wheel system produces a lightweight, dynamic ride quality that now has the added benefits of our UST Road Tubeless technology. This patented system provides seamless integration between the wheel and our new Yksion Pro UST tubeless tires that makes installation, removal, and maintenance easier than ever. You get all the benefits of tubeless, including less rolling resistance and a smoother, more controlled ride quality. Without tubes, you can run lower tire pressure with no risk of pinch flats, and the sealant helps prevent punctures. The rims are engineered using our ISM 4D technology and a wider design (19mm internal/23mm external). ISM stands for Inter Spoke Milling, a unique process that trims the thickness of the rim wall between the spokes to create a rim that's lighter but still very durable. The rear wheel uses 24 straight-pull spokes laced to our lightweight, fast engagement Instant Drive 360 hub mechanism. Delivered in 12x142, it can be also converted to regular quick release. Roll faster and smoother with a reduced risk of punctures - With UST Road Tubeless, no tube means no friction, so you experience less rolling resistance and higher speeds. - UST Road Tubeless lets you ride with lower tire pressure for a smoother ride and a reduced risk of punctures. - Our patented UST system offers a perfect union between tire and wheel, so installation, removal, and maintenance are easy. Climb, accelerate, and sprint faster - 19mm internal rim width increases air volume. - ISM 4D superlight rim - Double-butted steel spokes keep the weight down for a fast and comfortable ride. Powerful, reliable disc brakes for more confidence and control - 24 spokes front and rear for optimized brake torque distribution - Rear hub convertible from 12x142 thru-axle to quick release

12 x100/142, Center-Lock, HG 11 A good training or traveling wheelset, a milled rim laced with stainless spokes to a alloy hubs with high quality steel cup and cone bearings. Cup&Cone ceramic bearings for improved smoothness MOMAG - Undrilled rim bed for increased stiffness 2:1 Spoke Ratio for improved torque balancing Rim Dynamic Balance for improved balancing Oversize Flange for better spoke load distribution Spoke antirotation system for performance consistency

Asymmetric alloy rims are laced to alloy hubs with sealed cartridge bearings via double butted steel spokes. "Two-To-One" spoke ratio increase torsional rigidity by utilizing two spokes to carry out the function of one; slackening and torsion are limited increasing power transfer. Spoke tensions are more balanced and evenly distributed between drive and non-drive sides, increasing fatigue life Dynamic Balance rims weight the rim opposite the valve stem creating a balanced rim when rotating Oversized hubs and driveside flange provide greater torsional stiffness

Proven ENVE gravel wheel technology comes to the Foundation family with the AG25. Ready for high-speed adventure. Preparation is key to a successful adventure into uncharted territories. Our experiences developing and riding the flagship G Series and M Series have created a quiver of performance enhancing features that have been incorporated into the AG25. Features like our patented Wide Hookless Bead, tuned carbon materials, external nipples and our Foundation Road Hub all come together for a gravel wheel that’s more than the sum of its parts. It’s ready to take an already exceptional bike to a level of even higher performance and higher fun.

Proven ENVE gravel wheel technology comes to the Foundation family with the AG25. Ready for high-speed adventure. Preparation is key to a successful adventure into uncharted territories. Our experiences developing and riding the flagship G Series and M Series have created a quiver of performance enhancing features that have been incorporated into the AG25. Features like our patented Wide Hookless Bead, tuned carbon materials, external nipples and our Foundation Road Hub all come together for a gravel wheel that’s more than the sum of its parts. It’s ready to take an already exceptional bike to a level of even higher performance and higher fun.

The ENVE 45 is a modern multi-purpose road wheel in every way. Riders with inclinations toward racing and hard solo efforts will find the rim's drag-taming and cross-wind defying shape a welcome upgrade to their rides. Those with inclinations towards the road lost and forgotten will find the rim's width and anti-pinch flat technology complementary to higher-volume tubeless road tires. All said, the ENVE 45 is everything that the dynamic modern road rider needs, and nothing that they don't. - Application: Road, Road Race, Triathlon, All-Road - Internal Rim Width: 21mm - Tire Compatibility: Tubeless 25c or larger - Wheelset Weight: 1541g - Real World Foundation Aero Technology - Wide Hookless Bead provides pot-hole protection - Tubeless Optimized for Rolling Fast and Fewer Flats - Lifetime Incident Protection and 5 Year Factory Warranty - Handmade in Ogden, Utah

The SES 2.3 is purpose-built for going up. Ultra-light, respectfully aerodynamic, and optimized for tubeless tires the SES 2.3 raises the bar for performance through hilly and mountainous terrain. - Front and rear optimzed depths and shapes (27mm front, 32mm rear) - 21mm internal width is optimized for ENVE 27mm tires - Hookless tubeless rim is compatible with 25mm-32mm tires

What It Is A climbing wheel with an aero advantage designed to be ridden in the mountains and optimized for use with modern disc brake road bikes. Who it's for Road cyclists who require maximum versatility for riding in mountainous terrain and variable weather conditions. Why we made it Since the introduction of the original SES 3.4, we’ve implemented new design concepts across the SES lineup that result in a faster wheel and improved ride experience. The SES 3.4 features road tubeless compatibility, 25mm tire optimization, molded carbon brake track technology, and optimized SES aero rim shaping to ensure maximum efficiencies for a shallow aero wheel. Equally at home in the mountains as in the valleys, the SES 3.4 Disc is the most versatile Smart ENVE System aero wheel. Like all SES wheel models, the SES 3.4 features dissimilar rim shapes and geometries between the front and back wheels to maximize aerodynamic efficiency and rideability in variable wind and weather conditions. The front rim is 38mm deep and shallower than the rear rim to aid in crosswind stability while rear rim is 42mm deep and therefore improves overall airflow.

The wheel that first merged aero with high volume tires, designed to make you faster on all road surfaces. Proven on the cobbles of Paris-Roubaix. - Intended Use: Road, All-Road - Inner rim width: 25mm - Aero Optimized Tire Size: 27 – 32c - Tubeless-only AERO FOR ALL ROADS The SES 4.5 AR is an uncompromising aero wheel designed specifically for disc brake equipped bikes and large volume 27 to 30mm tubeless road tires. Rebellious, unconventional, and pioneering are words that describe the one of its kind SES 4.5 AR. Conceptualized for the cobbles of Paris-Roubaix through our partnership with Team Dimension Data, the SES 4.5 AR was developed to deliver top shelf aero performance, stability, and comfort for virtually any road surface. The SES 4.5 AR is available as a tubeless clincher and tubular model rim. The SES 4.5 AR borrows from ENVE M Series carbon mountain wheel tubeless technology and features hookless beads. Hookless beads improve aerodynamic performance by aiding airflow from tire to rim as well as allow for the best tubeless tire performance possible. Like all Smart ENVE System aero wheels, the front and rear rims are specifically designed for the airflow seen at the front and back of the bike. As such, the front rim is more shallow and wider to maximize stability and the rear is deeper and narrower to aid in drag reduction. In addition to dissimilar geometries, the SES 4.5 AR features a disc brake specific construction that saves weight, improves strength, and creates an unprecedented ride quality.

When speed across most any terrain is priority number one, look no further than the SES 4.5. Originally designed for the cobbles and crosswinds of Paris-Roubaix to provide an aero benefit with high volume tires, the SES 4.5 was the first of its kind and is now re-designed to deliver more speed in a lighter package. - Carbon fiber consctruction using continuously running fibers throughout the rim, tapering laminates, and removing excess material - Re-engineered to reduce weight, increase aero efficiency and further expand capabilities when the going gets fast - Hookless bead tubeless technology reduces weight, improves comfort, maintains strength, and ensures an exacting rim bead seat - Premium Road Hubs bring efficiency, longevity, and simplicity: Cold-forged and machined 6061 alloy for durable lightweight performance - Tubeless and disc brake only

What It Is The ultimate disc brake-specific, aerodynamic, lightweight road race wheelset. Who It's For The SES 5.6 Disc is optimized aerodynamically and structurally for disc use. Road cyclists and triathletes on disc brake bikes will benefit from the SES 5.6 Disc's reduced drag, lightweight design, and rim shape optimized for larger-volume road tires. Why We Made It Most "disc brake" wheelsets are simply repurposed rim brake wheels with disc hubs. The elimination of a braking surface opens up the realm of aerodynamic and structural possibilities. When you don't have to engineer a flat braking surface and manage high temperatures from braking, you can reduce the rim's weight, adjust shape for improved aerodynamics and provide better tubeless performance. Full Details Disc brake technology offers improved braking performance for amateur and professional road cyclists alike. Carbon fiber braking surfaces are a major design constraint that limits weight savings and rim design. By removing the constraints of a braking surface, we can completely rethink the shape of the rim. The SES 5.6 Disc features patented SES rim curvature, but has been further optimized for disc brakes. Additionally, the SES 5.6 Disc carbon fiber clinchers and tubulars are very lightweight, because the material used for rim brake heat management has been eliminated. This allows for a more structurally efficient and impact-resistant rim. Finally, the SES 5.6 Disc carbon clincher is road tubeless-compatible and can still be run with standard inner tubes and tires. Like the current generation SES carbon clinchers and tubulars, the 5.6 Disc has been aerodynamically optimized around 25mm tires.

ENVE let the science guide their quest for the ultimate aero road wheel and the SES 6.7 resulted. Beyond 70mm depth, aero gains taper off as weight increases. The SES 6.7 strikes the ultimate balance between aero efficiency, stability, and weight savings. The SES 6.7 replaces the venerable SES 7.8 as the flagship aero wheel model in the SES lineup due to its lower weight, greater versatility, and matched drag reduction. - Front and rear optimized profiles (60mm front, 67mm rear) - 25mm internal width optimized for 27mm ENVE tires - Hookless tubeless rim is compatible with 28mm-50mm tires

What It Is The fastest carbon fiber Smart ENVE System aero wheel yet. Who It's For Experienced triathletes and road racers seeking maximum aero performance and stability. Why We Made It We made the SES 7.8 to achieve two things: more speed and more stability. The SES 7.8 embodies the latest SES technologies and includes our newest molded-in brake track and tubeless clincher tire compatibility. The SES 7.8 is wider and specifically optimized to perform best when used with a modern aero frame and large, 25mm tires. Full Details When the race is against the wind and the clock the SES 7.8 is optimized for the task. By reducing the trade-offs between aerodynamics, stability, weight, and stiffness, the SES 7.8 carbon fiber aero wheel is the perfect tool for road racing and triathlon alike. The SES 7.8 features front- and rear-specific rim geometries. The front rim is 71mm deep and 29mm wide, while the rear rims is 80mm deep and 27.5mm wide. The dissimilar rim geometries improve the efficiency of the airflow in the system of bike frame and wheels. Because running 25mm tires is now standard, the SES 7.8 was designed with larger tires in mind. Additionally, frame manufacturers are now producing frames that have more clearance between wheel and frame which has opened up the design scope for a wheelset. The SES 7.8 is optimized for these frames. In addition to changes in shape and structure, the SES 7.8 features the latest molded-in carbon fiber brake track texture and is compatible with road tubeless tires.

What It Is The fastest carbon fiber Smart ENVE System aero wheel yet. Who It's For Experienced triathletes and road racers seeking maximum aero performance and stability. Why We Made It We made the SES 7.8 to achieve two things: more speed and more stability. The SES 7.8 embodies the latest SES technologies and includes our newest molded-in brake track and tubeless clincher tire compatibility. The SES 7.8 is wider and specifically optimized to perform best when used with a modern aero frame and large, 25mm tires. Full Details When the race is against the wind and the clock the SES 7.8 is optimized for the task. By reducing the trade-offs between aerodynamics, stability, weight, and stiffness, the SES 7.8 carbon fiber aero wheel is the perfect tool for road racing and triathlon alike. The SES 7.8 features front- and rear-specific rim geometries. The front rim is 71mm deep and 29mm wide, while the rear rims is 80mm deep and 27.5mm wide. The dissimilar rim geometries improve the efficiency of the airflow in the system of bike frame and wheels. Because running 25mm tires is now standard, the SES 7.8 was designed with larger tires in mind. Additionally, frame manufacturers are now producing frames that have more clearance between wheel and frame which has opened up the design scope for a wheelset. The SES 7.8 is optimized for these frames. In addition to changes in shape and structure, the SES 7.8 features the latest molded-in carbon fiber brake track texture and is compatible with road tubeless tires.