Skip to main content

Check the status of your order here | Online Orders

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Wheels

$154.99
Campagnolo's Record hub is loved all over the world for its pro-level quality, super-smooth bearings and excellent durability. It features an oversize shell for premium stiffness and it's built with cold-forged aluminum to maximize strength and minimize weight. Plus, you can easily adjust the bearing preload with a simple turn of an Allen wrench — even while the wheel is still on your bike.
$323.99 $359.99 10% Off
Control and stability for enduro riding. Details - Wheels sold individually not in sets. - Tuned Front and Rear Alloy Wheel System for enduro riding and racing. - Front- and rear-specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. - Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning. - Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip. - Welded and sleeved rim joint for additional strength.
$0.25
- Designed to stabilize 15g spokes in most hub flanges - 1000-pack
$0.60
The buyer's choice for wheel builders looking to save weight. The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use. - Weight: starting at 20g for 64 nipples
$12.00
DT Swiss Standard Front Quick Release Skewers. - Traditional cam-operated lever - Stainless steel shaft
$12.00
DT Swiss Standard Rear Quick Release Skewers. - Traditional cam-operated lever - Stainless steel shaft
$16.00
Pro Head Reinforcement System (PHR) has a larger and more spherical contact area and is designed to balance loads transferred to the rim. The PHR system acts as a ball and socket interface, allowing the spoke to pivot into alignment while maintaining even, consistent contact during installation in order to follow the perfect trajectory from the hub to the rim.
$19.19
Developed for short spokes with a large deflection angle. DT Pro Head nipples are designed for short spokes with a large angle of deflection, such as for e-bike use. Through the spherical contact surface, the nipple aligns automatically with the angle of the spoke, which leads to consistent power transmission. Note: brass nipples are not approved for children's products in the USA. See attached warning! All-brass nipples are recommended for e-bike use. - Weight: starting at 59g for 64 nipples.
$21.90
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$22.50 $25.00 10% Off
DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal
$23.28
This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - Compatible with straight pull hubs only - One 264mm spoke = 5.9g - Nipples sold separately
$24.74 $27.49 10% Off
DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal
$24.74 $27.49 10% Off
DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal
$24.74 $27.49 10% Off
DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal
$24.74 $27.49 10% Off
DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal
$24.74 $27.49 10% Off
DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal
$26.99 $29.99 10% Off
DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal
$26.99 - $37.90
When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening
$29.79
The buyer's choice for wheel builders looking to save weight. ProLock nipples contain a special adhesive compound (by Loctite) which is activated when a spoke is threaded into the nipple, forming a durable bond. - 32 nipples weigh approximately 30 grams
$38.90
When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and to perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening
$39.99
Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.
$41.00
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$47.00
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$47.99
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted. - DT Swiss Rear End Caps - QR x 135/142mm
$49.99
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$49.99
When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening - Conical X12 washer, compatible with Syntace X-12 system - Thread Pitch: 12 x 1.0mm
$49.99 - $52.99
When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening - Removable, plug-in lever design is streamlined and protects your RWS lever
$52.40 - $88.19
Champion 2.0 Black Spokes - One 264mm spoke = 7g
$52.99
When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows to fully tighten the axle and to perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening - Removable, plug-in lever design is streamlined and protects your RWS lever - Thread pitch: 12 x 1.5mm - Length: 121mm
$53.19
Make it more aerodynamic – this nipple is hidden inside the rim. DT Hidden Nipples are designed for high-profile rims, in which the inverted design is essential for optimum precision. They are very light and hidden on the inside of the rim: perfectly suited for high aero wheels. The nipples will align perfectly due to their spherical contact surface. - Weight: 22g for 64 nipples
$55.99
This wide rim tackles bumpy sections and holds up to hard hits. Enjoy the long rides! The sleeved aluminum gravel rim is the ideal choice for riding over gravel, roots, or small obstacles on unpaved paths. The robust, all-round rim, with its inner width of 24mm and its wide knobby tires up to 53mm, is suitable for various purposes and provides great comfort.
$59.99
Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.
$72.99 - $129.99
Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs.
$74.90
Lightweight, sleeved 22.5mm XC-specific rim. The rim for those who like to pedal hard for hours, for the endurance riders. Weight-optimized but wide enough to offer good tire support, this is the X 412. Its sleeved construction pairs top-notch performance with a great price, leaving you with enough money to pay for the pizza party after your next century ride.
$75.00
Lightweight, sleeved 22.5mm XC-specific rim. The rim for those who like to pedal hard for hours, for the endurance riders. Weight-optimized but wide enough to offer good tire support, this is the X 412. Its sleeved construction pairs top-notch performance with a great price, leaving you with enough money to pay for the pizza party after your next century ride.
$79.99
The new standard for durability and price. - Contact-free seals and high precision build guarantee smooth bearings
$85.00 - $127.99 $127.90 - $127.99 Up to 34% Off
Our lightest alloy rim with welded, advanced rim profile! The most advanced alloy existing for rims meets the most advanced rim profile to form the RR 411 rim. From the moment the alloy is melted, all the way to the secret surface treatment, this rim is all about getting the absolute best out of the great, shiny metal that is aluminum. Very light, very strong, and very classy is the result.
$85.99
Sleeved 25 mm Enduro rim, ready for the rough. Let your muscles play on the uphills and switch to attack mode for the downhills. This is exactly what DT Swiss Enduro rims are made for. Each rim is a piece of high precision engineering and, thanks to the extremely resistant alloy, the E 512 can cope with the most demanding trails.
$86.10 - $89.99
This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - One 264mm spoke = 6g - Nipples sold separately
$89.99
DT Swiss' 350 MTB hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these Center Lock disc hubs make rotor installation and removal super fast.
$90.90
Reliability meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.
$124.90
A 25mm welded rim made for the demands of AM. Lightweight rims as wide as most downhill rims were just a couple of years ago? State-of-the-art materials and extensive testing make it possible. DT Swiss knows exactly how light it can design a product to fulfill its purpose to perfection. This is why the XM 421 is as light as an All Mountain rim can get, yet still fears no trail, no matter what rock gardens it has on the menu.
$127.90
You like gravel and wide tires? This is your rim. The GR 531 is made for off-road adventures. This aluminum gravel rim with an inner width of 24 mm is designed for wide, knobby tires up to 53mm. Torsion-resistant and robust, the welded rim supports a wide range of gravel use.
$149.99
Strong and lightweight welded AM rim in 30mm inner width for modern tires. Riders who like the idea of giving their tires some extra volume and support will find the ideal partner with the XM 481. Its full 30mm of inner width combined with a minimal hook and perfect tubeless compatibility, make it ready to tackle all demanding trails, both up and down the mountain.
$150.90
A 30mm welded Enduro rim developed for the fastest EWS rider. Enduro may be young as a discipline, but at its core is the intrinsic need of riders to ride burlier terrain faster and faster. Something that MTB has been all about since the beginning. The EX 511 rim is the perfect tool for this quest. It comes with all the technology that has delivered many EWS wins and packs it in a 30mm-wide profile, ready to go burlier, faster.
$188.99 $209.99 10% Off
Nowadays, bikers ride what used to be called downhill trails on enduro bikes. The trails are getting rougher, and the demands on the gear and rider are greater. The E 1900 SPLINE has been developed to deal with precisely these requirements. With its stiff aluminum rim, lightweight straight-pull spokes, and proven DT Swiss hubs, this wheel is well-prepared for any challenge. The balance of weight and stiffness will put a smile on your face whether you're riding uphill or downhill. After all, most of the best trails don't offer lift service.
$223.90
The new standard for durability and price. - Patented Star-Ratchet system - Contact-free seals and high precision build guarantee smooth bearings - Press-fit end caps allow tool-free maintenance and conversion
$267.90
Reliability meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.
$341.91 $379.90 10% Off
Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel. - Intended use = All-Mountain/Trail, Enduro and Freeride - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape
$17.99 $19.99 10% Off
- Extra security against theft - 5mm hex CrMo axle
Proven ENVE gravel wheel technology comes to the Foundation family with the AG25. Ready for high-speed adventure. Preparation is key to a successful adventure into uncharted territories. Our experiences developing and riding the flagship G Series and M Series have created a quiver of performance enhancing features that have been incorporated into the AG25. Features like our patented Wide Hookless Bead, tuned carbon materials, external nipples and our Foundation Road Hub all come together for a gravel wheel that’s more than the sum of its parts. It’s ready to take an already exceptional bike to a level of even higher performance and higher fun.
$29.00
SILCA valve stem extenders for tubular tires and tubes with removable valve core. ENVE recommends that the length of your tire/tube valve + the length of your extender exceeds the depth of the rim by at least 10mm. - The 34mm set is optimized for the SES 3.4 and SES 3.4 Disc - The 45mm set is optimized for the SES 4.5 and SES 5.6 Disc - The 75mm set is optimized for the SES 7.8 and SES 7.8 Disc
$1,200.00 $1,600.00 25% Off
Proven ENVE gravel wheel technology comes to the Foundation family with the AG25. Ready for high-speed adventure. Preparation is key to a successful adventure into uncharted territories. Our experiences developing and riding the flagship G Series and M Series have created a quiver of performance enhancing features that have been incorporated into the AG25. Features like our patented Wide Hookless Bead, tuned carbon materials, external nipples and our Foundation Road Hub all come together for a gravel wheel that’s more than the sum of its parts. It’s ready to take an already exceptional bike to a level of even higher performance and higher fun.
$1,200.00 $1,400.00 14% Off
The ENVE 45 is a modern multi-purpose road wheel in every way. Riders with inclinations toward racing and hard solo efforts will find the rim's drag-taming and cross-wind defying shape a welcome upgrade to their rides. Those with inclinations towards the road lost and forgotten will find the rim's width and anti-pinch flat technology complementary to higher-volume tubeless road tires. All said, the ENVE 45 is everything that the dynamic modern road rider needs, and nothing that they don't. - Application: Road, Road Race, Triathlon, All-Road - Internal Rim Width: 21mm - Tire Compatibility: Tubeless 25c or larger - Wheelset Weight: 1541g - Real World Foundation Aero Technology - Wide Hookless Bead provides pot-hole protection - Tubeless Optimized for Rolling Fast and Fewer Flats - Lifetime Incident Protection and 5 Year Factory Warranty - Handmade in Ogden, Utah
$1,280.00 - $1,400.00 $1,600.00 - $1,750.00 20% Off
ENVE AM30 Carbon Wheelsets use a 30mm inside width rim that is tuned for compliance and damping for performance on All-Mountain, Enduro, and Trail riders. - 30mm internal rim width - Gravity rated impact strength - Rim shape tuned for compliance and damping - Wide Hookless Bead Anti-pinch flat technology
$2,040.00 $2,550.00 20% Off
What It Is This wheel is the future of gravity riding and racing. It's ride-optimized, incredibly strong, and debuts the most effective and lightest anti-flat system on the market (ENVE's patent-pending Protective Rim Strip). These wheels will give downhill-oriented riders a new freedom to set their tire pressure for cornering and rock garden stability without sacrificing their confidence to smash track speeds. Who It's For Gravity junkies, Enduro racers, and hard-charging trail riders will find enlightenment riding the M7 Series. A completely new shape and design that massively reduces the risk of pinch flatting and/or damaging the carbon, The M7 Series provides the confidence to ride without limitations. Why We Made It Enduro runs on two things – Confidence and Control. Nothing ruins a good shred fest like a flat tire or broken rim, and nothing spooks you on a dusty trail like an unexpected drift. With this in mind, we have been hard at work over the past 2 years to develop a carbon wheel system that will allow ourselves, athletes, and most importantly – you – to go "full-send" without compromising the ride experience by running high tire pressures, DH tires, and heavy pinch flat reduction inserts. Building upon the platform of the M7 Series' predecessor the M70, we re-profiled the rim to mate up with modern tires and to absorb trail vibrations and chatter. However, just fitting tires is not enough. We know that riders also want the freedom to run lower pressure and that doing so can introduce flat tires and damaged rims. The ENVE solution is a new rim shape paired with ENVE's patent-pending, energy absorbing Protective Rim Strip. With this technology, riders can skip the inserts and run the tires and pressures they want. Amazingly, we've managed to keep the weight neutral and improve impact resistance too.
$2,040.00 $2,550.00 20% Off
This wheel is the future of gravity riding and racing. It's ride-optimized, incredibly strong, and debuts the most effective and lightest anti-flat system on the market (ENVE's patent-pending Protective Rim Strip). These wheels will give downhill-oriented riders a new freedom to set their tire pressure for cornering and rock garden stability without sacrificing their confidence to smash track speeds. Who It's For Gravity junkies, Enduro racers, and hard-charging trail riders will find enlightenment riding the M7 Series. A completely new shape and design that massively reduces the risk of pinch flatting and/or damaging the carbon, the M7 Series provides the confidence to ride without limitations. Why We Made It Enduro runs on two things – Confidence and Control. Nothing ruins a good shred fest like a flat tire or broken rim, and nothing spooks you on a dusty trail like an unexpected drift. With this in mind, we have been hard at work over the past 2 years to develop a carbon wheel system that will allow ourselves, athletes, and most importantly – you – to go "full-send" without compromising the ride experience by running high tire pressures, DH tires, and heavy pinch flat reduction inserts. Building upon the platform of the M7 Series' predecessor the M70, we re-profiled the rim to mate up with modern tires and to absorb trail vibrations and chatter. However, just fitting tires is not enough. We know that riders also want the freedom to run lower pressure and that doing so can introduce flat tires and damaged rims. The ENVE solution is a new rim shape paired with ENVE's patent-pending, energy-absorbing Protective Rim Strip. With this technology, riders can skip the inserts and run the tires and pressures they want. Amazingly, we've managed to keep the weight neutral and improve impact resistance too.
$2,040.00 $2,550.00 20% Off
What It Is This wheel is the future of gravity riding and racing. It's ride-optimized, incredibly strong, and debuts the most effective and lightest anti-flat system on the market (ENVE's patent-pending Protective Rim Strip). These wheels will give downhill-oriented riders a new freedom to set their tire pressure for cornering and rock garden stability without sacrificing their confidence to smash track speeds. Who It's For Gravity junkies, Enduro racers, and hard-charging trail riders will find enlightenment riding the M7 Series. A completely new shape and design that massively reduces the risk of pinch flatting and/or damaging the carbon, The M7 Series provides the confidence to ride without limitations. Why We Made It Enduro runs on two things – Confidence and Control. Nothing ruins a good shred fest like a flat tire or broken rim, and nothing spooks you on a dusty trail like an unexpected drift. With this in mind, we have been hard at work over the past 2 years to develop a carbon wheel system that will allow ourselves, athletes, and most importantly – you – to go "full-send" without compromising the ride experience by running high tire pressures, DH tires, and heavy pinch flat reduction inserts. Building upon the platform of the M7 Series' predecessor the M70, we re-profiled the rim to mate up with modern tires and to absorb trail vibrations and chatter. However, just fitting tires is not enough. We know that riders also want the freedom to run lower pressure and that doing so can introduce flat tires and damaged rims. The ENVE solution is a new rim shape paired with ENVE's patent-pending, energy absorbing Protective Rim Strip. With this technology, riders can skip the inserts and run the tires and pressures they want. Amazingly, we've managed to keep the weight neutral and improve impact resistance too.
$2,040.00 $2,550.00 20% Off
ENVE's most well-rounded road wheelset, the SES 3.4 is a climber with an aero edge. It's just the right depth to cover steep grades at speed. Since its introduction in 2009, the Smart ENVE System 3.4 has established itself as ENVE's most versatile and consequently most popular carbon fiber aero road wheelset amongst road cyclists of all abilities. The new SES 3.4 is wider than its predecessor (27.5mm wide external, 21mm internal) to improve rolling resistance and improve aerodynamics for use with 25mm tires and is available in both rim and disc brake models. In addition to added width, the versatile and reliable nature of the SES 3.4 has been augmented by incorporating road tubeless tire compatibility. Road tubeless compatibility means improved rolling resistance, comfort, traction, and a reduced propensity for flat tires. Like all SES models, the SES 3.4 features dissimilar rim shapes and geometries between front and back wheels to maximize aerodynamic efficiency and rideability in variable weather conditions. The front rim is 38mm deep and shallower than the rear rim to aid in crosswind stability while the rear rim is 42mm deep and therefore improves overall airflow attachment. - Intended Use: Road - Inner Rim Width: 21mm - Aero Optimized Tire Size: 25c - Rim and Disc Brake Models Available - Tubeless Optimized; Tube Compatible DISC BRAKE TECHNOLOGIES GO FAST; STOP FAST: The SES 3.4 Disc features a disc brake-specific carbon fiber rim design. In other words, this is not simply a rim brake model with no brake track. Each SES Disc rim features a disc brake-specific laminate to ensure optimal performance on disc brake-equipped road, cyclocross, and triathlon bicycles. As a result of disc brake-specific engineering the SES 3.4 Disc is substantially lighter than its rim-brake counterpart but equally as stiff and impact resistant. This is accomplished because we are able to deploy the carbon fiber that previously served the requirements for heat management to now serve the requirements for stiffness and durability. Need to know: - Disc-specific construction with no brake tracks - Rims are lighter by 40-60g per rim - Impact resistance increased - Greater lateral stiffness TUBELESS COMPATIBLE SPEED, COMFORT, PROTECTION: Greater speed, comfort, grip and puncture resistance – what's not to like about road tubeless? With the selection of a high performance tire at the right pressure, you can achieve lower rolling resistance and more speed. Tubeless also allows you to run much lower tire pressures for far greater comfort, traction, and efficiency, especially over poor road surfaces and gravel, all without sacrificing speed. The potential for pinch flats and, with sealant, debris punctures is all but eliminated. ENVE recognized early that road tubeless technology is here to stay and we drew on our years of experience making the world's best mountain bike wheels to optimize the SES range for tubeless (excluding the current SES 4.5). With rims going wider and frames giving more tire clearance, the key aspects of bike design were aligned to make tubeless the best choice: wider rims make it easier to mount tubeless tires. Disc brakes add even more benefits for tubeless, typically allowing larger tires as well as removing issues of heat at the rim. Need to know: - Tubeless optimized design - Faster rolling - Higher grip - Greater comfort - Outstanding puncture resistance
Page 1 of 4 Next page