Riser

$19.99 - $20.49
An quick way to make a bike more comfortable, Dimension High-bars come in four different rises for inexpensive and easy bar-height changes.
- Four rise options available from 30-100mm
- AL-6061 aluminum alloy
- ISO4210 Safety Tested for City/Trekking use
- Not recommended for use with bar-ends or clip-on aero bars
- 15-degree sweep

$32.99
$44.99
27% Off
Specialized Alloy Mini Rise Handlebars area wide handlebar made of premium alloy with a minimal 10mm of rise.
- High-strength 7000-series premium aluminum alloy
- Rise: 10mm
- Width: 750mm and 780mm
- Clamp diameter: 31.8mm

$34.99
- Manufactured from cold drawn, seamless 6061 material
- Shot peened for increased fatigue life
- Gradual external swaging & internal taper give increased strength & durability without adding weight
- 710mm wide

$49.99
Answering a call from the wild and satisfying the style-conscious among us, the new Classic Kyote is the latest offering from Ritchey for adventure riding and bikepacking. Featuring a super-comfortable 27.5-degree sweep and 35mm rise, the Kyote bar is perfect for skirting ridge lines, cutting trails, and exploring near and far. With a plentiful 800mm width, there's lots of space for bags, lights, and navigation, while the Kyote's rise and sweep offer a natural hand position for comfort and control—even when loaded with gear. Featuring the timeless high-polish silver finish, the Kyote represents Ritchey's deep heritage with handlebar design and a never-ending quest for adventure. Embrace the Kyote, and chase the ultimate adventure experience.
- Designed for adventure and bikepacking
- Classic high-polish silver finish
- 800mm wide for control and plenty of space for bags, lights, etc.
- Material: double-butted 6061 alloy
- Width: 800mm
- Rise: 35mm flat rise
- Backsweep: 27.5°
- Clamp diameter: 31.8mm
- Bar-end compatible: yes
- Weight: 360g

$54.99
The Race Face Aeffect handlebar is a budget-friendly alloy bar intended for XC and Trail use — the most affordable option for riders looking for a 35mm handlebar.
- Shot-peened to increase fatigue resistance
- 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance
- Manufactured from cold drawn, seamless aluminum
- Upsweep: 5°
- Backsweep: 8°

$54.99
A slightly modified profile gives the RaceFace Aeffect R handlebar the extra boost you’re looking for at high speeds. Built for tearing down your favorite trail...fast.
Generous 780mm width to give you the stance and control you need. This is a no-nonsense, set-and-forget bar that is equally at home on your trail bike as it is on an enduro machine. Take your bike to the Rally level without breaking the bank.
- Shot-peened to increase fatigue resistance
- 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance
- Manufactured from cold drawn, seamless aluminum
- Upsweep: 5°
- Backsweep: 9°

$54.99
Do you love to ride your mountain bike? Love boosting big airs, punishing the trails and your gear? You just want parts that can take a beating and won't let you down — the Chester 35 bar is made for you. These bars will last long after your bones, bruises and scrapes heal up and you're ready to tackle that gap jump that has had your number.
- Manufactured from cold drawn, seamless 6061 Aluminum
- Shot peened for increased fatigue life
- 35 optimized triple butted design

$65.00
The Klunker Bar will quickly become your favorite handlebar. These upright, chromoly handlebars are the perfect position for bombing dirt roads, a trek across town to visit the new coffee shop, and loaded touring. The Klunker is 680mm wide, has a comfortable 45° sweep, and 3" (7.6cm) of rise. The clamp diameter is 25.4mm and the grip area is 22.2mm - standard outer diameters for mountain and city brakes and shifters. Due to its design, you'll need a removable faceplate stem to work with this bar.
Specs:
Stem Clamp: 25.4mm
Grip: 22.2mm
Rise: 7.6cm
Sweep: 45 deg
Width: 680mm

$79.99
Wide bars are all the rage for a reason: increased stability, more control and less fatigue. With Easton's Havoc 35 Bar, riders can have tons of strength and stiffness without the heft. The Havoc 35 aluminum handlebar is a full 800mm wide and thanks to EA90 aluminum, TaperWall butting, and Easton’s legendary cold-working process, the Havoc is among the lightest, strongest and stiffest aluminum DH bars on the market.

$79.99
Race Face Atlas riser handlebar with an anodized, shot-peened finish.
- Aonodized, shot-peened finish
- Cold-drawn and butted proprietary AirAlloy aluminum tubing
- 4 degree upsweep

$89.00
Developed to offer the same feel and shape as our T1 Carbon handlebars at a sweeter price. 5° Upsweep and 7° Back sweep offers stable comfort for all types of riding.
- Available in 20, 30 & 40mm rises
- All our aluminum bars are 800m wide

$89.99
DEITY's expanded aluminum handlebar line now includes the SKYLINE 787 All MTN / Enduro / Trail handlebar. We've taken all of our experience in developing the strongest handlebars and implemented a featherweight version to bring DEITY to the top of the mountain!
Utilizing our trade-secret Gradient Butting Technology, while investing the time and cost to properly heat-treat each handlebar model individually, we are able to deliver the lightest premium DEITY aluminum handlebar in the line. Most manufacturers don't take the time or absorb the cost to heat treat a single production handlebar model separately from other models. Nevertheless, the resulting 20% increase in strength in all of our aluminum handlebars is just one of the many reasons we go the extra mile at any cost to allow you to climb – descend – repeat!
- The DEITY All MTN / Enduro / Trail handlebar
- 787mm wide
- The SKYLINE handlebar is our lightest aluminum bar
- Ultra-sleek two-tone bead blasted and polished ano finish for incredible detailing and durability
- Custom Gradient Butted 7075 T73 aluminum
- Featuring a 31.8mm bore for lightweight performance and strength
- Features measured cut marks and center alignment detail
- 9 degree bend / backsweep by 5 degree upsweep
- Black ano finish with color graphics
- Covered by our Lifetime Crash Replacement Policy to the original owner
Sizes:
- 15mm (290gm)
- 25mm (296gm)

$89.99
Wider than Turbine but still sporting the agressive sweep design putting you in the perfect riding position, these bars come in a variety of rises to allow you to fine tune your cockpit and dial in your setup. Tried and tested 7075 aluminum gives you the confidence for agressive all-mountain riding and 35mm technology for fantastic overall weight/strength ratio. Your six inch travel bike will thank you.
- Manufactured from cold drawn, 7075 Aluminium
- 35 optimized triple butted design
- Turned up to Rally control with 800mm width
- Rise sizes to for every build and preference 10/20/35mm
- Stealth black on black decals to match every frame color

$94.99
The handlebar of choice for the Scott / Velosolutions and Norco Factory Racing World Cup teams, the BLACKLABEL 800 is the evolution of over a decade of DEITY handlebar development. By widening the center bore area, we could increase strength while still delivering an incredibly comfortable, stable, and responsive feel that is unmatched. This premium race good is built for championships!
- 800mm width
- Designed for DH / Enduro / All MTN applications
- Dirt Mag Top 100 Product - 4 years running for 2014, 2015, 2016, and 2018
- Incredibly detailed two-tone bead blast and polished ano finish
- 9-degree bend / backsweep by 5-degree upsweep
- Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology
- Designed for maximum ride quality with a 31.8mm bore
- World Cup DH / Redbull Rampage / Crankworx and FMB World Tour proven
- The handlebar of choice for the Scott / Velosolutions and Norco Factory Racing World Cup teams
- Features measured cut marks and center alignment detail
- Covered by our Lifetime Crash Replacement Policy to the original owner
- 15mm rise: 333g
- 25mm rise: 342g
- 38mm rise: 343g

$158.00
Whisky's No.9 Riser Bar features a 25mm rise and a 5-degree upsweep to offer a slightly more upright riding position that increases control and comfort. It’s wide, sleek, and tested to the highest standards to deliver a ride you can trust mile after mile. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.

$169.95
Same proven Ritchey quality, performance, and materials now beefed up and available in trail-worthy widths. A shallow rise and gentle sweep are the key attributes of the WCS Trail Rizer bar. The extra-wide grip area allows plenty of room for all components and remotes of choice.
- Material: carbon fiber
- Width: 780mm
- Rise: 15mm
- Backsweep: 9°
- Upsweep: 6°
- Clamp diameter: 31.8mm
- Bar-end compatible: yes
- Weight: 199g

$170.00
Simply put, it's the perfect trail bar. The M6 bar is tuned for the dream combination of response, compliance, and high strength. Available in a traditional 25mm rise or a low 7.5mm rise, it sweeps back at 9 degrees and up 5 degrees, providing excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain.
- Material: Carbon Fiber
- Weight: 200g (25mm rise); 190g (7mm rise)
- Bar Width (Max): 780mm
- Bar Width (Min): 740mm
- Clamp Diameter: 31.8mm
- Sweep: 9 Degrees
- Tip: 5 Degrees
- Torque Spec: Face Plate: 5.5Nm
- Torque Spec: Controls: 5.5Nm

$174.99
Wide bars are all the rage for a reason: increased stability, more control and less fatigue. With Easton's Havoc 35 Carbon Bar, riders can have strength and stiffness without the weight. The Havoc 35 Carbon handlebar is a full 800mm wide and thanks to TaperWall butting, and Easton’s massive experience with carbon, the Havoc is among the lightest, strongest, and stiffest carbon DH bars on the market. When the trail tilts downward, you want the Havoc in your hands.

$189.00
Developed with our Oval Tech construction the T1 Carbon Handlebars are ready for any trail. 5° Upsweep and 7° Back sweep offers stable comfort for all types of riding. Available in 10, 20, 30 & 40mm rises all our carbon bars are 800m wide.
Page 1 of 1