Apparel and Accessories

Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. - Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. - Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in but doesn't let water out. - Capacity: 26oz (768 mL) - Material: Plate: 6061-T6 Aluminum - Cage: Nylon Composite Vee Cage - Computer Mount: Nylon Composite - Bottle: Lead free, BPA-Free and HDPE food safe certified bottle - Brackets: Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 9.3oz (265g)

Highly adjustable stainless-steel carrier with three ways to dial in your fit. Includes our impressive gripping GORILLA cage. Fits the widest number of saddles of any XLAB Delta system. The DELTA series of saddle mounted carriers have the largest degree of adjustability of any rear carrier, allowing you to place your bottle in the aerodynamic "sweet-spot" directly behind the rider, minimizing drag and maximizing time gains, typically between 120 and 165 seconds over the course of a full distance triathlon.

Carry your gear behind you tucked out of the wind with XLAB's Super Wing Dual Rear Carrier. This versatile aero add-on delivers options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages attach on the outside and tubes can go underneath (accessories sold separately). The possibilities are endless. You also have 12 different mounting options so you can place your bottles where you want them. Also, the Super Wing is made of light, tough aluminum so there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.

The Air Glove features a compression-molded cuff and a single layer palm with laser perforated holes for breathability. Micro-mesh is used all over for added ventilation. Silicon print on finger offers a grippy spot for brake lever grip.

Midweight glove with some protection on index and middle fingers

The all-new Flowline SE Helmet is handpicked, literally, by the pros and for good reason. The Flowline SE Helmet features all the same marquee accolades as the Flowline Helmet including an NTA 8776 E-Bike Certification and Virginia Tech 5-Star Safety rating but with upgrades. Premium details like a fidlock® magnetic buckle, Anti-Microbial Quick Dry comfort liner, dual density EPS and more make Flowline SE the premium choice for any rider looking to hit their local trails or cruise the streets on their e-bikes. Specifications - 3-Way adjustable screwless visor - NTA-8776 certified for E-Bike usage - MIPS B-Series Rotational Impact Brain Protection System - Full 360-degree fit retention system with 3-way rear height adjustment - 14 vents for maximum airflow - Full wrap in-mold construction - Extended Coverage MTB Trail Helmet - Fidlock® Magnetic Buckle System - Dual Density EPS for low and high-speed impacts - Anti-microbial Quick Dry Premium Liner - Side strap adjusters - 5-Star Virginia Tech safety rating

The Sprint won’t make things any easier for the competition. Focusing on how the kit fits and feels on the bike we have revised articulation points and used lighter, more durable materials in the pants and shorts. All helping to make the Sprint kit even more race-ready. Sprint is constructed from lightweight, durable 90% Polyester/10% Spandex® - TLD Race Fit - Mid-rise waist, roomier cut with a balance of performance and durability - 90% Polyester/10% Spandex construction is both lightweight and durable - 600D & 500D Mesh - Strategic Mesh Paneling - Redesigned knee zone features a slimmer profile without inhibiting protection while permitting improved articulation for better movement and pedaling capabilities - Two strategically placed zipper pockets; 1 on the upper left leg, 1 positioned on the lower right hamstring area - Optimal 2 Hand Pockets - Increased resistance to chain abrasion through sonic welded thermo skin applied to the lower right inside ankle - Self-Fabric Waist Adjusters

TLD's Stage helmet: less weight, more fun! Since its debut, the Stage helmet has redefined mountain bike safety, style, comfort and ventilation. Stage is the lightest full-face helmet in its class, and combines MIPS (Multi-directional Impact Protection System), EPP (for slow speed impacts) and EPS (for high-speed impacts) in one sleek package, that sets the standard for mountain bike enduro helmets. A Polylite shell w/fiber reinforcement and Polyacrilite injected chin bar w/EXOskeleton adds strength without sacrificing weight. 11 high-flow air intakes and 14 exhaust ports and large ventilation chin bar openings aid in cooling and comfort in all conditions. The TLD Stage Helmet also includes an X-Static® helmet liner that is moisture-wicking, quick-drying and odor-fighting. A Fidlock® buckle and lightweight hardware round out the overall package. - DUAL DENSITY EPS co-molded with EPP combine to safely manage high and low-speed impact energy (PATENT PENDING) - MIPS brain protection system reduces rotational forces to the brain in certain crash scenarios - EPP lined chinbar for multi impact performance - Drawstring bag with breathable mesh paneling and additional anodized hardware, liners and pads - Meets Certification for CPSC 1203, CE EN1078, ASTM F1952, ASTM F2032, and AS/NZS 2063 - 690 grams (1.5 lbs) size M/L - 3 Year Warranty **Not rated for motorized use**

The Nitelite Rear helps you be seen by others on the road, whether you're riding at night or in the rain. This pair of bright red LED lights signal to drivers just how wide your bike really is, so they can give you enough space when overtaking, and keep a safe distance from you—and the little one on the back of your bike. Red safety lights positioned to make your bike look more visible and wider, so drivers know to steer clear Fits securely on the rear-facing bar ends of the Captain's Chair and Clubhouse carriers Made for all-weather riding, with durable aluminum housing and IPX4 water resistance rating Choose from 3 modes and their respective runtime: constant (2.5 hrs), pulse (7 hrs), and flash (13 hrs) USB-rechargeable, eliminating disposable batteries—convenient to use and better for the planet! Built-in battery level indicator Fits tubes with an inner diameter of 15.2 - 20.3 mm

The Nitelite Side helps you stay safe on the road by making your bike more visible. Whether you're riding at night or in the rain, this pair of amber LED lights makes it easy for drivers approaching from the sides to spot you at intersections, and for those approaching from behind to see how wide your bike really is. Amber safety lights positioned to make the sides of your bike more visible, so drivers know to steer clear Fits securely on the side-facing bar ends of the Captain's Chair, Clubhouse carriers, and handlebars Made for all-weather riding, with durable aluminum housing and IPX4 water resistance rating Choose from 3 modes and their respective runtime: constant (2.5 hrs), pulse (7 hrs), and flash (13 hrs) USB-rechargeable, eliminating disposable batteries—convenient to use and better for the planet! Built-in battery level indicator Fits tubes and handlebars with an inner diameter of 15.2 - 20.3 mm

- Reflective orange - One size fits all

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

Stick a Stix on it. This fabric clip mount makes it a cinch to clip your Specialized Stix to a bag, jacket, or jersey for on-the-go visibility. - Stainless steel spring clip for secure mounting.

Mounts a Specialized Stix light to a CPSC, DIN standard reflector/rack bracket or the Specialized Pizza Rack. - Vertical CPSC hole pattern. - This mount can attach to the Horizontal Din hole pattern. - Specialized single hole pattern for the Pizza Rack. - Mounts Stix light horizontally. - Includes all mounting hardware.

Increase your visibility by using the Stix Arm/Leg Band mount to attach your Specialized Stix light to arms and legs. - Includes rigid mount and fabric band for comfortable and secure hold. - Wraps around ankle to keep pant legs away from chainrings. - Increases visibility and versatility of Stix lights, both on an off the bike.

Our Body Geometry Dual-Gel gloves are all about comfort. They feature strategically placed gel pads throughout the palm to alleviate hand fatigue by relieving pressure on the ulnar nerve. This design also comes with the added benefit of minimizing hand numbness, as well as reducing many other negative effects that come as a result of road vibrations. Breathability has also been accounted for at the back of the hand, while a secure fit is ensured by a contoured Velcro closure. - Synthetic suede palm is made from a thin microfiber to combine durability with exceptional grip and comfort - Body Geometry Dual Gel padding uses two layers of gel that provide exceptional impact and vibration damping without compromising grip - Combination of breathable mesh at the upper and soft Lycra make for a durable and comfortable top of hand - Soft and absorbent Microwipe thumb brushes away sweat with ease - Contoured Velcro wrist closure offers easy adjustment and entry/exit from the gloves - Reflective elements increase your visibility to motorists in low-light conditions

Put this little bright spot anywhere—your belt, your backpack, your seatpost—and ride on. The Flashback is your go-to savior, packing a mighty “I’m here!” punch to keep you visible on the streets. With its belt clip, you can literally clip it on just about anything, and its compact size makes it a total no-brainer for keeping your ride safe and your street-cred high. - Compact, bright, and waterproof. - Built-in fabric belt clip makes it a clip-anywhere taillight option (seatpost mount included). - Four operating modes: Steady (10 lumens), Power Flash (20 lumens), Disco Flash (14 lumens), Eco Flash (5 lumens). - 2- to 20-hour runtime, depending on mode. - Tested and approved for the following Specialized helmet models: Align, Ambush Comp, Chamonix, Propero II, Echelon II

Featuring a proprietary pad system designed by Dr. Kyle Bickel M.D., Specialized's Grail gloves are ergonomically designed for the best possible fit and protection. They're scientifically tested to help reduce hand numbness by improving circulation and equalizing pressure in the soft tissues of the hand. Even further, you'll find a durable synthetic leather palm, breathable mesh at the top of the hand, and Equalizer gel padding at the palm. - Minimal teardrop shape makes for a positive handlebar feel - Synthetic leather palm is both supple and durable - High-stretch mesh is placed at the top of hand for its soft, breathable qualities. - Absorbent Microwipe thumb surface for wiping away sweat. - Easy slip-on wrist cuff fits comfortably without inhibiting movement.

To complement their superb fit and breathability, our SL Pro gloves feature our LifeLine palm construction for optimal hand-to-bar contact, and this delivers maximum control and total comfort. You'll also find a smooth suede palm for security, enhanced feel, and comfort, as well as a low-profile slip-on cuff that creates an incredible fit. With all of these features, it's no wonder the SL Pro gloves are among the top-choice of racers on the World Tour. - Ultra-thin Clarino synthetic microfiber suede palm offers exceptional bar feel. - Strategically-placed perforations at the palm create added ventilation. - LifeLine palm construction eliminates bunching, providing a second-skin fit with better feel at the bars. - Premium Italian upper is our lightest, most breathable mesh. - Slip-on cuff features taped seams for wrist closures that are clean, comfortable, and secure. - Fingertip tear-off pockets make removing your hands from the gloves super easy.

The new Prime-Series Thermal Gloves have been designed to add some warmth on chilly days. A Polartec Neoshell upper keeps your hands safe from wind and chilly weather, all while keeping the overall bulk of the gloves at a minimum. Pair that with a hydrophobic AX Suede palm and you'll have all the dexterity and comfort you need. Additionally, the HyprViz treatment increases your visibility to motorists around the clock by pairing Hyper Green with black. Like all of the pieces in our Prime-Series, the Prime-Series Thermal Gloves have been designed with the best fabrics and design available. - Fabric Content: BACK: 90% Polyester, 10% Spandex; PALM: 100% Polyester. - Hydrophobic Ax Suede fit palm ensures a confident grip with the bars. - Hyper Green Polartec Neoshell is paired with unique reflective trims to drastically increase your visibility to motorists 24-hours a day. - Reflective details enhance your visibility in low-light conditions. - Velcro cuff allows for micro-adjustments in fit so that you can wear this glove under or over your jacket cuff. - Wind-resistant Polartec Neoshell upper staves off wind and chilly weather. - Wiretap touchscreen-compatible for easy use of smartphones.

Riding is for everyone, so we created the Camber to provide a dialed fit for rippers of all sizes, from kids on up. The Camber comes equipped with all the comfort, style, and ventilation to make every ride a joyride. Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - Camber earned the highest 5-Star Virginia Tech Helmet Rating from internationally renowned Virginia Polytechnic Institute and State University. - The MIPS system is a low-friction layer that allows a sliding motion of 10 to 15mm in all directions. Studies indicate that this reduces some of the rotational forces transmitted to the brain during angled impacts. - With x-small to x-large options spread across five unique shell sizes, the Camber eliminates excess bulk to deliver a comfortable and streamlined fit to a full range of riders. - Easily-adjustable, one-size Headset SX fit system with adjustable Tri-Fix web splitters delivers an easy and accurate fit. - 4th Dimension Cooling System optimizes ventilation. - In-molded shell improves strength and reduces weight. - This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor. - Average weight: 370 grams (medium).

With the Flash Headlight/Taillight Combo, you're equipped with everything you need to be seen—day or night. It features up to 70 lumens in the front and 20 lumens in the rear, and it features the versatility of four light modes, ranging from steady and strong to flashing and brilliant. Increase your visibility with the Flash Headlight/Taillight Combo. - Headlight: 20- to 70-lumen output. - Headlight: 2 hours to 24 hours runtime. - Tail light: 5- to 20-lumen output. - Tail light: 2 hours to 20 hours runtime. - Flexible mounting system works with handlebar and seatposts from 22.2mm up to 35mm in diameter, as well as most seatstays, helmets, and saddle bags. - Four headlight modes including: Steady (55 lumens), Power Flash (70 lumens), Disco Flash (55 lumens), Eco Flash (20 lumens) - Four taillight modes including: Steady (10 lumens), Power Flash (20 lumens), Disco Flash (14 lumens), Eco Flash (5 lumens)

A good pair of tights should be towards the top of your winter riding essentials list, and the RBX Tights are no exception. They were purposefully constructed without a chamois, and the reason is pretty simple. For those who prefer to keep riding in their favorite bib shorts year-round, you're able to simply layer these tights over your shorts for predictable comfort and added warmth. And for anyone seeking out versatility, these tights will be perfect for use in other disciplines like Nordic skiing, running, or snowshoeing. - Articulated design ensures the perfect fit while in the riding position. - Fabric Content: 78% Nylon, 22% Spandex Knit - Four-way stretch fabric provides ample comfort and a soft hand against the skin. - No chamois included in this tight allows you to wear it over your favorite bib shorts or shorts, extending the wearability of this piece when you need the extra leg protection. - Reflective elements increase your visibility to motorists in low-light conditions. - UPF 50+ rating protects your skin from harmful ultraviolet rays.

Our Women’s Body Geometry Dual-Gel gloves are all about comfort and are specifically tailored for female riders. They feature strategically placed gel pads throughout the palm to alleviate hand fatigue by relieving pressure on the ulnar nerve. This design also comes with the added benefit of minimizing hand numbness, as well as reducing many other negative effects that come as a result of road vibrations. Breathability has also been accounted for at the back of the hand, and this means less sweat buildup, while a secure fit is ensured by a contoured Velcro closure. - Synthetic suede palm is made from a thin microfiber to combine durability with exceptional grip and comfort - Body Geometry Dual Gel padding uses two layers of gel that provide exceptional impact and vibration damping without compromising bar grip or control - Combination of breathable mesh at the upper and soft Lycra make for a durable and comfortable top of hand - Soft and absorbent Microwipe thumb brushes away sweat with ease - Contoured Velcro wrist closure offers easy adjustment and entry/exit from the gloves - Reflective elements increase your visibility to motorists in low-light conditions

A good pair of tights should be towards the top of your winter riding essentials list, and the RBX Tights are no exception. They were purposefully constructed without a chamois, and the reason is pretty simple. For those who prefer to keep riding in their favorite bib shorts year-round, you're able to simply layer these tights over your shorts for predictable comfort and added warmth. And for anyone seeking out versatility, these tights will be perfect for use in other disciplines like Nordic skiing, running, or snowshoeing. - Articulated design ensures the perfect fit while in the riding position. - Fabric Content: 78% Nylon, 22% Spandex Knit - Four-way stretch fabric provides ample comfort and a soft hand against the skin. - No chamois included in this tight allows you to wear it over your favorite bib shorts or shorts, extending the wearability of this piece when you need the extra leg protection. - Reflective elements increase your visibility to motorists in low-light conditions. - UPF 50+ rating protects your skin from harmful ultraviolet rays.

Featuring a proprietary pad system designed by Dr. Kyle Bickel M.D., our Women's Grail gloves are ergonomically designed to provide the best possible fit and protection for women. They're scientifically tested to help reduce hand numbness by improving circulation and equalizing pressure in the soft tissues of the hand. Even further, you'll find a durable synthetic leather palm, breathable mesh at the top of the hand, and our acclaimed Equalizer gel padding at the palm. - Breathable mesh upper is soft, comfortable, and made from high-stretch materials. - Clarino synthetic leather palm provides durability without sacrificing bar-feel. - Scientifically proven Body Geometry Equalizer gel pad distributes surface pressure over the hand, and this creates unrestricted blood flow enhancing overall hand comfort. - Soft and absorbent Microwipe thumb brushes away sweat with ease. - Tapered, slip-on cuff gives you a clean, sharp, and minimalistic construction for unrestricted comfort.

Our Body Geometry Dual-Gel Long Finger gloves are all about comfort. They feature strategically placed gel pads throughout the palm to alleviate hand fatigue by relieving pressure on the ulnar nerve. This design also comes with the added benefit of minimizing hand numbness, as well as reducing many other negative effects that come as a result of road vibrations. Breathability has also been accounted for at the back of the hand, while a secure fit is ensured by a contoured Velcro closure. And lastly, phone use is a non-issue, as the fingertips are designed to be touchscreen-compatible. - Synthetic suede palm is made from a thin microfiber to combine durability with exceptional grip and comfort - Body Geometry Dual Gel padding uses two layers of gel that provide exceptional impact and vibration damping without compromising bar grip or control - Soft and absorbent Microwipe thumb brushes away sweat with ease - Contoured Velcro wrist closure offers easy adjustment and entry/exit from the gloves - Reflective elements increase your visibility to motorists in low-light conditions - Compatible with conductive touchscreens

Featuring a proprietary pad system designed by Dr. Kyle Bickel M.D., our Grail Long Finger gloves are ergonomically designed for the best possible fit and protection. They're scientifically tested to help reduce hand numbness by improving circulation and equalizing pressure in the soft tissues of the hand. Even further, you'll find a durable synthetic leather palm, breathable mesh at the top of the hand, touchscreen compatible Wiretap technology, and our acclaimed Equalizer gel padding at the palm. - Clarino synthetic leather palm provides durability without sacrificing bar-feel. - Body Geometry Equalizer pad was developed by Dr. Kyle Bickel M.D. to fill the recesses of the palm in order to create an even surface over the hand. This comes with the positive result of unrestricted blood flow, which will greatly reduce numbness and tremendously enhance overall comfort. - Tapered, slip-on cuff gives you a clean, sharp, and minimalistic construction for unrestricted comfort. - Breathable mesh upper is soft, comfortable, and made from high-stretch materials. - Soft and absorbent Microwipe thumb brushes away sweat with ease. - Compatible with conductive touchscreens.

The Specialized Women's Tahoe mountain bike shoes were designed to deliver rugged and dependable off-road performance, especially if your rides see a good deal of hiking. To do so, they feature a SlipNot rubber outsole for added grip over roots and wet terrain. And to keep the shoes stiff enough for riding and flexible enough for walking, they also have a Lollipop inner plate that sits in a bed of comfy EVA padding. The fit is relaxed for everyday use, and the Body Geometry sole provides ergonomically designed comfort and efficiency. - Body Geometry sole construction and footbed: ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - SlipNot rubber compound developed in Specialized's tire lab optimizes shoe and pedal connection. - Stiff Lollipop inner plate delivers high performance pedaling, and it sits in a bed of EVA to soften landings and maintain off-the-bike traction. - Relaxed Fit for a balance of pedal feel and walking comfort. - Lacelock elastic keeps laces out of chainrings. - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Toe and heel overlays provided added abrasion resistance. - Approximate weight: 325g (1/2 pair, size 39)