Parts & Accessories

• Vinyl coated hooks • 9 mm diameter • Black

Stealth buckle set 25 mm, 1 set. (1 male and 1 female) for replacement closures on Back-Roller/Front-Roller top cross straps (all models '99 and above).

For mounting rear lights on Topeak Tubular Rack, MTX BeamRack or any rack with 80 mm (center to center) mounting holes.

Buckle ("Mojave") 25 mm, 1 pc. (male and female) for all models up to '98

• 24-inch long double strap • Vinyl-coated hook ends

Replacement stays for a variety of Tubus racks. Every roundstay is made out of solid aluminum, and they are available in various lengths and offsets. - 8mm diameter stay - Drilled for M5 bolts

Stealth Buckle Repair Set. 25 mm, male and female housing with openings, 2 pcs. For replacement of buckles previously seated on a closed (sewn) loop of webbing.

- Bike rack RR 290 mm strut kit with hardware - Great for smaller frames - 4 bolts & nuts - 1 set/bag

Jandd Mono-Stay Rack Adaptor is used for bikes that have a wishbone-style configuration on the rear end.

QL 1 Lower hook for model year 2010 and beyond. Mates to "half-moon" shaped lower rail art. # E176

A stretch web net that helps secure items to a rear rack. - Four nylon molded hooks for rack attachment - Fits any rack - Dimensions: 11 x 11" - Custom-molded silicone - Stretches to three times its size

- Stretch web secures those hard-to-hold items - Great for any rack - 4 easy-to-handle molded hooks attach anywhere - Dimensions 11" x 11"

For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.

- Clamp-set for seatstay mounting for 18mm - For mounting a rear carrier on seatstays without eyelets

- Clamp-set for seatstay mounting for 21mm - For mounting a rear carrier on seatstays without eyelets

Built from tough seatbelt webbing and a thick elastic strip, this cargo strap makes it easy to secure your gear. Use it a thousand different ways to make sure whatever you’re carrying stays with you all the way.

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

Elastic strap with lower hook for Vario hybrid packs. Provides additional support for heavy loads.

Surly Front Rack Hardware

For travelers, whose on-the-go routine includes time on-the-bike, the Pioneer Handlebar Pouch is the perfect match. Add this special kit to our Pioneer 9 and Pioneer 12 to mount it to your handlebar. Handlebar Kit includes: -Velcro straps (x2) -1" gatekeepers (x2) - Stabilizer Strap Compatible with: - Pioneer 9 - Pioneer 12

This Tubus dropout extension adapter allows you to mount racks further back on the frame. It also allows you to mount traditional racks on bikes with disc brakes. - Weight: 66g - NOTE: This item is not compatible with any “EVO” Tubus racks

Lock your panniers to your rack with Ortlieb's QL2 Anti-Theft Device. Simply mount the steel cables on your bags with the included hardware and then securely lock them in place.

These handy adapters are for mounting a rack on bikes where clearance is needed for disc brake calipers or other accessories. - Screw them into the same holes on the dropouts for rack or fender bolts - Made from special hardened aluminum stock with a threaded steel insert - Best when only torqued to the same degree as rack bolts - Pegs are about .75" long - Can be used single sided or double sided - Sold in Pairs

Jandd Rack Extenders are used for mounting rear racks to braze-on points or the mono-stay adapter. - Sold in Pairs

If you have unconventional handlebars (sold separately) but still want a bag with easy access when riding then pick up Ortlieb's Extension Mounting Set for the Ultimate5 handlebar bag (sold separately). It pushes the bag out front further than normal so you can still use your fun hand positions and enjoy the convenience of a handlebar bag.

Thule's Pack n' Pedal Side Frames mount quickly and easily to the sides of their Pack 'n Pedal Tour Rack (sold separately). They allow you to use any model of pannier for increased luggage capacity and a lower center of gravity.

Topeak's front basket handlebar fixer fits standard bikes or eBikes with display units. - Fits up to 1-inch handlebars

LM-BF 35 Fork Adapter, for forks without eyelets. Use with rigid forks* with a diameter from 25mm up to 40mm. For all Tubus lowriders except for Duo. *Please Note: Do NOT mount on suspension forks!

Ortlieb's Ultimate5 Mounting Set is the piece that holds the bag to the bar. Whether you need one to mount the bag on a different bike or simply want spare parts for a long tour, the mounting set is an indispensable part of the Ultimate5 bag (sold separately).

Ortlieb's Ultimate6 Mounting Set uses an integrated lock to secure your Ultimate6 bag (sold separately) to your bars. Additionally, the lid of the Classic, Plus and Pro models can also be locked. Whether you need one to mount the bag on a different bike or simply want spare parts for a long tour, the mounting set is an indispensable part of the Ultimate6 system.