Lighting

- Compatible with 6-12V E-bike battery - Integrated reflector - Water and shock resistant - Mounting distance 50 mm - Visible from the side - 40g

Attaches Blackburn Local Lights to any rack.

The Grid Front Light has four mode options, you can choose if you need high lumen power or extended run time. Ready for those commuting in the city, riding the open roads, or heading to their local trail. Grid Front Lights offer plenty of rechargeable power to keep you visible while out riding. - COB LEDS - Pack more LEDs in a small package with a powerfully even and wide light array to help you to be seen while riding in any environment. - ECO MODE - Extremely long run time in our Eco Mode for those riding all week, or on long daily rides. Eco Mode also extends the Pulse and Strobe modes by two hours. - USB-C - Modern USB plug standard to ensure you can stay charged and ready to ride - BATTERY GAUGE - Small color LEDs in the power button help you monitor your light battery power, to tel you when it's time to charge your light once more. Green = 100-50%, Orange = 50-25%, Red = 25-0% - MEETS ANSI FL-1 STANDARD - This standard was created by the American National Standards Institute (ANSI) to provide consistent performance measurements for handheld lights. - IP-65 - Ingress protection rating or 'IP rating', is a techy way to describe the level of water and dust proofness a product has. This light meets the IP-65 standard, which means is totally protected against dust/grit and is fully resist strong jets of water from all directions. - LIMITED LIFETIME WARRANTY - Restrictions and conditions apply.

The Grid Rear Light has four mode options, you can choose if you need high lumen power or extended run time. Ready for those commuting in the city, riding the open roads, or heading to their local trail. Grid Rear Lights offer plenty of rechargeable power to keep you visible while out riding. - COB LEDS - Pack more LEDs in a small package with a powerfully even and wide light array to help you to be seen while riding in any environment. - ECO MODE - Extremely long run time in our Eco Mode for those riding all week, or on long daily rides. Eco Mode also extends the Pulse and Strobe modes by two hours. - USB-C - Modern USB plug standard to ensure you can stay charged and ready to ride - BATTERY GAUGE - Small color LEDs in the power button help you monitor your light battery power, to tell you when it's time to charge your light once more. Green = 100-50%, Orange = 50-25%, Red = 25-0% - MEETS ANSI FL-1 STANDARD - This standard was created by the American National Standards Institute (ANSI) to provide consistent performance measurements for handheld lights. - IP-65 - Ingress protection rating or 'IP rating', is a techy way to describe the level of water and dust proofness a product has. This light meets the IP-65 standard, which means is totally protected against dust/grit and is fully resist strong jets of water from all directions. - LIMITED LIFETIME WARRANTY - Restrictions and conditions apply.

The Grid 2'fer is a high-powered front and rear light. A quick double-click of the power button switches it from white to red. With four mode options, you can choose if you need high lumen power or extended run time. Ready for those commuting in the city, riding the open roads, or heading to their local trail. Grid 2'fer offers the right light, front or rear, with plenty of rechargeable power to keep you visible any time of day. - COB LEDS - Pack more LEDs in a small package with a powerfully even and wide light array to help you to be seen while riding in any environment. - ECO MODE - Extremely long run time in our Eco Mode for those riding all week, or on long daily rides. Eco Mode also extends the Pulse and Strobe modes by two hours. - USB-C - Modern USB plug standard to ensure you can stay charged and ready to ride - BATTERY GAUGE - Small color LEDs in the power button help you monitor your light battery power, to tel you when it's time to charge your light once more. Green = 100-50%, Orange = 50-25%, Red = 25-0% - MEETS ANSI FL - 1 STANDARD-This standard was created by the American National Standards Institute (ANSI) to provide consistent performance measurements for handheld lights. - IP-65 - Ingress protection rating or 'IP rating', is a techy way to describe the level of water and dust proofness a product has. This light meets the IP-65 standard, which means is totally protected against dust/grit and is fully resist strong jets of water from all directions. - LIMITED LIFETIME WARRANTY - Restrictions and conditions apply.

Looking for a light set that is simple, affordable, and bright? The Blackburn DAYBLAZER 400 and Click USB combo is just the ticket. The DAYBLAZER 400 features the BLITZ daytime running mode, versatile mounting options, and excellent side visibility, while the Click rear light packs 20-lumens of light in a tiny, easy-to-use package. DAYBLAZER 400 Front Light - No tools required - Lithium-ion battery - Waterproof to IP-67 standard - 3 hour recharge time - LED Charge Indicator - Runtime: High 1hr (400 lumen), Low 5 hrs (200 lumen) - Runtime Pulse/Strobe: 6hrs (200 lumen)/10 hrs (200 lumen) - 59g CLICK USB Rear Light - Charging cable included, no tools required - Lithium polymer battery - Waterproof to IP-65 standard - 3-hour recharge time - Lumens: High 20, Flash 20 - Runtime: High 1.5hrs, Flash 3hrs - Weight: 22g/0.05

Grid Front and Rear Lights have four mode options, you can choose if you need high lumen power or extended run time. A complete set ready for those commuting in the city, riding the open roads, or heading to their local trail. The Grid Light Set offers plenty of rechargeable power to keep you visible while out riding. - COB LEDS - Pack more LEDs in a small package with a powerfully even and wide light array to help you to be seen while riding in any environment. - ECO MODE - Extremely long run time in our Eco Mode for those riding all week, or on long daily rides. Eco Mode also extends the Pulse and Strobe modes by two hours. - USB-C-Modern USB plug standard to ensure you can stay charged and ready to ride - BATTERY GAUGE - Small color LEDs in the power button help you monitor your light battery power, to tell you when it's time to charge your light once more. Green = 100-50%, Orange = 50-25%, Red = 25-0% - MEETS ANSI FL-1 STANDARD - This standard was created by the American National Standards Institute (ANSI) to provide consistent performance measurements for handheld lights. - IP-65 - Ingress protection rating or 'IP rating', is a techy way to describe the level of water and dust proofness a product has. This light meets the IP-65 standard, which means is totally protected against dust/grit and is fully resist strong jets of water from all directions. - LIMITED LIFETIME WARRANTY - Restrictions and conditions apply.

The Grid 2'fer is a set of high-powered front and rear light. A quick double-click of the power button switches it from white to red. With four mode options, you can choose if you need high lumen power or extended run time. Ready for those commuting in the city, riding the open roads, or heading to their local trail. Grid 2'fer offers the right light, front or rear, with plenty of rechargeable power to keep you visible any time of day. - COB LEDS - Pack more LEDs in a small package with a powerfully even and wide light array to help you to be seen while riding in any environment. - ECO MODE - Extremely long run time in our Eco Mode for those riding all week, or on long daily rides. Eco Mode also extends the Pulse and Strobe modes by two hours. - USB-C-Modern USB plug standard to ensure you can stay charged and ready to ride - BATTERY GAUGE - Small color LEDs in the power button help you monitor your light battery power, to tel you when it's time to charge your light once more. Green = 100-50%, Orange = 50-25%, Red = 25-0% - MEETS ANSI FL-1 STANDARD - This standard was created by the American National Standards Institute (ANSI) to provide consistent performance measurements for handheld lights. - IP-65-Ingress protection rating or 'IP rating', is a techy way to describe the level of water and dust proofness a product has. This light meets the IP-65 standard, which means is totally protected against dust/grit and is fully resist strong jets of water from all directions. - LIMITED LIFETIME WARRANTY - Restrictions and conditions apply.

The Grid Side Light Set is designed to be mounted to either side of your fork and is spec'd with eye-catching amber-colored LEDs. Supported by a study by the National Highway Traffic Safety Administration (NHTSA) that showed 27% of bicycle accidents are side impacts and 30% of fatalities occur in intersections (between 2010-2017). Being seen from all angles while cycling has never been easier with this weather-proof, rechargeable Grid Side Light Set. - COB LEDS - Pack more LEDs in a small package with a powerfully even and wide light array to help you to be seen while riding in any environment. - ECO MODE - Extremely long run time in our Eco Mode for those riding all week, or on long daily rides. Eco Mode also extends the Pulse and Strobe modes by two hours. - USB-C - Modern USB plug standard to ensure you can stay charged and ready to ride - BATTERY GAUGE - Small color LEDs in the power button help you monitor your light battery power, to tell you when it's time to charge your light once more. Green = 100-50%, Orange = 50-25%, Red = 25-0% - MEETS ANSI FL-1 STANDARD - This standard was created by the American National Standards Institute (ANSI) to provide consistent performance measurements for handheld lights. - IP-65 - Ingress protection rating or 'IP rating', is a techy way to describe the level of water and dust proofness a product has. This light meets the IP-65 standard, which means is totally protected against dust/grit and is fully resist strong jets of water from all directions. - LIMITED LIFETIME WARRANTY - Restrictions and conditions apply.

Compact, bright, and versatile, the ViZ150 stands out with high visibility from OptiCube lens technology and Daytime Hyperflash mode in an economical package. - 3 LEDs (150 lm) - Highly visible during daytime - 300 degree visibility - Long rear beam projection - OptiCube lens technology - Lithium-ion rechargeable battery - USB rechargeable (Micro-USB cable included) - Low battery indicator - 4 modes *Charging time: 3h - Mode memory function - Battery Auto Save (The mode automatically changes to flashing when the battery power gets low.) - New seat post bracket SP-15 which fits contemporary (kammtail) aero seatpost - Snap System Run time: - Constant (20 lumens):5 hrs - Flashing (15 lumens):70 hrs - Group Ride (50 lumens):11 hrs - Daytime Hyperflash (150 lumens):15 hrs

Energizer CR2032 Batteries, 3V Lithium Coin Cell 2032 Watch Battery. Used in bicycle lights; heart rate monitors; Garmin, Wahoo, and Stages electronics accessories; etc.

Seat Post Mount Kit for Varia RCT715

Garmin Varia UT800 Meet the smart headlight that shines brighter for longer - High-intensity cycling headlight for urban and trail use that’s visible in daylight from more than 1 mile (1.6km) away - Projects a steady blast of 800 lumens for up to 1.5 hours - Automatically adjusts to ambient light conditions, speed and ride profile to extend battery life - Works independently or pairs with compatible Edge cycling computers to automatically turn lights on or off, control brightness and more - Offers 5 light modes, including high, medium, low, night flash and day flash Specs: - Dimensions (LxWxH): 3.8" x 1.3" x 1.2" (96.6mm x 33.5mm x 29.7mm); 1.8" with flange (44.7mm with flange) - Weight: 4.6oz (130.0g) - Battery life: 1.5 hours, high; 3.0 hours, medium; 6.0 hours, low; 25.0 hours, day flash; 6.0 hours, night flash - Lumens: 800 - CREE LED: yes - Degrees of visibility: 270 degrees - Visibility distance: 1 mile (1.6km) - Water rating: IPX7

Stay aware of approaching cars with Varia RTL515 rearview radar. It pairs with your Edge bike computer or compatible smartphone to alert you of vehicles approaching from behind up to 153 yards (140 meters) away. When used with your compatible smartphone, the Varia app uses bold graphics — plus tone and vibration alerts — to indicate the position and speed of approaching vehicles. MAXIMUM AWARENESS - Varia RTL515 rearview radar provides visual and audible alerts for vehicles approaching from behind up to 153 yards (140 meters) away. MULTIPLE PAIRING OPTIONS - This radar works seamlessly with your Edge bike computer or compatible smartphone as well as select Garmin wearables or the optional radar display unit. WORKS WITH THE VARIA APP - This smartphone app helps you increase your awareness by providing graphics — plus tone and vibration alerts — that indicate the position and speed of approaching cars. THIRD-PARTY APP COMPATIBLE - When used with a compatible smartphone, Varia radar integrates with your favorite apps, such as Ride with GPS to overlay your maps with rearview radar alerts. SUPERIOR VISIBILITY - Alert motorists to your presence as soon as possible with daylight visibility up to 1 mile. COMPACT DESIGN - Easily mount this sleek, compact device on the seatpost of almost any road-use bicycle. The vertical design allows for better leg clearance and a perfectly comfortable ride. PELOTON MODE - Varia RTL515 features multiple modes, including peloton mode, which provides a low-intensity flash that is kind to other cyclists’ eyes when riding in a group. BATTERY LIFE - Time spent charging is not as good as time spent riding. Get up to 16 hours of battery life in day flash mode and up to 6 hours in solid mode. Physical Specifications - Dimensions: 3.9” x 0.8” x 1.6" (98.6 x 19.7 x 39.6 mm) - Weight: 2.5 oz (71.0 g) - Modes: solid, peloton, night flash, day flash - Lumens: 20 solid, 8 peloton, 29 night flash, 65 day flash - Battery life: 6 hours solid, 8 hours peloton, 6 hours night flash, 16 hours day flash - ANT+: Yes - BLE: Yes - Water rating: IPX7 - Viewing angle: 220° In the box: - Varia RTL515 - Mounting Kit - Cables - Documentation

It sees what you can't. Varia RCT715 rearview radar with camera and tail light continuously records your ride and automatically saves footage before, during and after events if it detects an incident. The bright tail light makes you more visible to motorists. And Varia RCT715 integrates seamlessly with your Garmin bike computer or the Varia mobile app on your paired compatible smartphone to alert you to traffic as you ride. The app allows for live video viewing for camera setup, plus video transfer so you can replay footage postride. A selection of operation modes lets you flex camera and tail light features to maximize battery life for longer rides.

The Plus front bike light is a super-bright, 100% waterproof and versatile USB rechargeable bicycle light. Mount the light to your handlebars or forks, or use the integrated wearable clip to attach the light to your shirt pocket or panniers. More of a runner than a cyclist? No worries. The Plus light also doubles up as a wearable night running light. Just attach the light to your t-shirt, shorts, socks or headband using the smart integrated clip. With an output of 40 lumens and a run time of up to 20 hours in eco flash, the Plus ensures you are well seen to all other cyclists, road users, and trail runners all night long.

The Plus rear bike light is a super-bright, 100% waterproof and versatile USB rechargeable bicycle light. Mount the light to your seatpost, seat stays, and pannier racks, or use the integrated wearable clip to attach the light to your t-shirt or backpack. More of a runner than a cyclist? No worries. The Plus light also doubles up as a wearable night running light. Just attach the light to your t-shirt, shorts, socks, or headband using the smart integrated clip. With an output of 20 lumens and a run time of up to 40 hours in eco flash, the Plus ensures you are well seen to all other cyclists, road users, and trail runners all night long.

The Plug is a light that harkens back to Knog's roots, using an overmolded soft touch TPU in three fun colors. Kicking out 250 lumens, this light is packed with fresh technology like a low battery indicator, cut-outs in the front light body for improved side visibility, and like all Knog bike lights, it is fully USB rechargeable. Designed to work with all genres of bicycles from commuters to road bikes, the Plug comes with two silicone bands for securing it to handlebars (22-27mm & 27-32mm). The Plug is a light for every-day, for every ride, for everybody. Increased Side Visibility Cutouts in the side of the Plug design result in improved side visibility. Given the fact that 78% of accidents happen with cars not seeing bikes at intersections, any additional visibility from the side can only be a good thing. USB Rechargeable As with all of Knog's bike lights the Plug is 100% rechargeable. Recharging is achieved via the micro USB port conveniently located behind the large rear button. Using a micro USB cable (not supplied) you can simply recharge off any USB port. Easy One Button Operation A large, soft-touch button ensures easy operation of the Plug. The Plug's oversized button allows the user to turn the light on and off with ease, even when wearing gloves. Low Battery Indicator Don't be caught out with an uncharged bike light again. With the Plug's clever side visibility window doubling up as a low battery indicator, you'll know when exactly when your light needs recharging. - Dimensions: H: 43mm x W: 33mm x L: 75mm - Weight: 65g - Charge Time: 2.5 hours - Lumens: 250

PWR Rider is a 450 lumen bike light that can also be used as a power bank. Includes the option to program your brightness and runtime (through ModeMaker app), then use your remaining battery to charge your devices. The light outputs in an elliptical beam for broader, brighter road coverage; has a 2 hr runtime at max 450 lumens and 4 smart battery indicator LEDs to let the rider know how much charge is left in the light. The two “Charger” lights come with 5 pre-programmed modes, just in case you haven’t yet discovered the ModeMaker app. The PWR Rider will last 2 hours at 450 lumens, and for those with stamina, will run at 200 lumens for 5 hours. Program your modes: The ModeMaker app lows you to design the modes for any PWR bike light. Simply plug in your light, then select and tailor modes from the menu. You can do things such as control brightness, adjust runtimes and add new light modes. Charge your devices: Rear of the light is a USB rechargeable power bank. Use this to charge your phone, GoPro or cycle computer on the go. 1 hour riding @450 lumens means you can top up charge your iPhone by 35%. Charge time 3.5 hours. - Light output: 450 Lumens - Power bank: 2200 mAh - Dimensions: 122 x 30mm - Weight: 115g - What's in the pack: Light, Silicone Strap, USB Cable, Hex Key

The Plus twinpack is a set of super-bright, 100% waterproof and versatile USB rechargeable bicycle lights. Mount the lights to your handlebars, forks, steaposts, and stays, or use the integrated wearable clip to attach the light to your shirt pocket or panniers. More of a runner than a cyclist? No worries. The Plus light also doubles up as a wearable night running light. Just attach the light to your t-shirt, shorts, socks or headband using the smart integrated clip. With an output of 40 lumens at the front, 20 lumens at the rear, and a run time of up to 20 hours in eco flash, the Plus ensures you are well seen to all other cyclists, road users, and trail runners all night long.

Mid Cobber produces an incredible 330º of light, so you'll be clearly seen from all angles. In an increasingly busy world, this bike light is brilliantly effective at attracting attention and helping keep you safe on the road. Packing 170 lumens this Mid Cobber is seriously bright. The Cobber has integrated USB recharging, is 100% waterproof and you can program the settings using the Modemaker app. It mounts with tool-less removable silicone straps for bars/seat posts 22 – 32mm+ diameter with magnetic mount (aero Mount also included). If you are looking for the best rear commuter bike light around, look no further. - Light modes: Max, Mid, Steady Pulse, Flash, Rolling Flash, Side Flash, Disco Flash, Eco Flash come pre-programmed - LEDs: Efficient Chip on Board (COB) LEDs designed to provide maximum brightness level for up to 90% of the battery burn time for each mode - Charge time: 4 hours (LED will turn off when fully charged) - Battery: USB Rechargeable Lithium Polymer - Accessories included: Standard Mount, Aero Mount, 3x interchangeable straps for bars/seat posts 22-27mm / 28-32mm+, and USB extension - Dimensions: 62 x 33mm - Weight: 44g

Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.

The versatile Composite Matrix Helmet Mount is a durable and versatile accessory for Lezyne KTV Pro, Power XL, Macro XL, Hecto XL and Micro XL Drives. It is constructed with lightweight and durable mold-injected Composite Matrix material for its base plate and spherical pivot. A strong rubber and Velcro strap attaches the mount to the helmet. The Composite Matrix spherical pivot and cradle allow the user to adjust the position of the light in all directions.

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 11 lumens. IPX7 water resistant rating. Composite matrix fender mounting system. E-bike compatible (6v input, 0.6w / 12v input 1.2w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm long power cable included. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

A compact cycling safety light built around three high-output LED emitters, the KTV Drive Pro 300+ Front light offers up to 300 lumens of output and a highly disruptive Daytime Flash mode. It features a lightweight yet durable waterproof construction, rigorously tested to IPX7 Waterproofing standards. The KTV Drive Pro 300+ Front offers convenience and versatility with six output modes, up to an impressive 100-hour max runtime, and waterproof USB-C charging(cable not included). Note: This light is not being distributed within the German market. - Max 300 lumen blast mode / 100-hour runtime in Femto mode - Max 300 lumen blast mode / 100-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Waterproof USB-C charging port with charge indicator - Low-profile mounting with integrated strap hooks - Rigorously tested to IPX7 Waterproofing standards - 1400 mAh battery capacity

The Strip Drive Front is a highly versatile LED cycling light offering up to 400 lumens. It features a lightweight and waterproof design with a durable co-molded lens/body construction. Its unique aero- and round-bar-compatible backside can mount to many odd shapes and sizes. It has an enhanced lens with built-in side visibility and five high-output LEDs. An integrated, cable-free USB stick makes charging simple, and the Strip Drive Front can run for up to 21.5 hours on a single charge. Specs - Max Lumens: 400 - Weight: 69g - Max Runtime: 21:30 hours - Recharge Time: 2 hours

FRONT LIGHT: A compact cycling safety light built around three high-output LED emitters, the KTV Drive Pro 300+ Front light offers up to 300 lumens of output and a highly disruptive Daytime Flash mode. It features a lightweight yet durable waterproof construction, rigorously tested to IPX7 Waterproofing standards. The KTV Drive Pro 300+ Front offers convenience and versatility with six output modes, up to an impressive 100-hour max runtime, and waterproof USB-C charging(cable not included). REAR LIGHT: The KTV Drive+ Rear is a compact yet powerful rear light that ensures optimal visibility and safety on your rides. With a maximum output of 40 lumens, an impressive 45-hour runtime in Femto mode, and six different output modes, including Daytime Flash, this rear light provides reliable illumination. The unique design is compatible with aero and round seatposts, ensuring versatility for various bike setups. The light utilizes our Wide-Angle Optics lens design to provide 270° of visibility, and an integrated USB stick allows convenient cable-free recharging. Rigorously tested to IPX7 Waterproofing standards, it can withstand challenging weather conditions. Note: These lights are not being distributed within the German market. - Front Light Max 300 lumen blast mode / 100-hour runtime in Femto mode - Front Light Max 300 lumen blast mode / 100-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Waterproof USB-C charging port with charge indicator - Low-profile mounting with integrated strap hooks - Rigorously tested to IPX7 Waterproofing standards - 1400 mAh battery capacity - Rear Light Max 40 lumens / 45-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Wide Angle Optics: 270° of visibility - Unique aero and round seatpost compatible design - Rigorously tested to IPX7 Waterproofing standards - Integrated USB-stick for cable-free recharging - 400 mAh battery capacity

The Strip Drive Pro 400+ Rear is a cutting-edge rear light offering ten LEDs and a maximum output of 400 lumens; it is engineered for impressive efficiency and runtime, providing the best beam pattern for optimal light dispersion in even the most challenging conditions. Plus, with an impressive 80-hour max runtime, you can rest assured that this light will last as long as you need it to. Offering seven different output modes, including the highly disruptive Daytime Flash that grabs attention and the wide-angle optics providing an impressive 270° visibility range. It features a lightweight yet durable waterproof construction, rigorously tested to IPX7 Waterproofing standards. A versatile mounting system attaches to aero or round seatposts, and the light also features USB-C waterproof charging(cable not included). Look no further, as this cycling tail light delivers unparalleled visibility-during the day or after dark. Note: This light is not being distributed within the German market. - Max 400 lumens / 80-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Wide Angle Optics: 270° of visibility - Waterproof USB-C charging port with charge indicator - Maximum side visibility design - Multiple mounting options with ladder strap - Lightweight and durable co-molded design - Seven combined solid and flash modes - Fits most seatpost shapes - Rigorously tested to IPX7 Waterproofing standards - 1900 mAh battery capacity

Bright and efficient multi-purpose e-bike cycling light. Durable, heat-dissipating CNC machined aluminum construction. Two ultra-high-output LEDs deliver up to 500 lumens. Enhanced MOR (Maximum Optical Reflection) lens with built-in side visibility. Intelligent Auto Day/Night dim mode. E-bike compatible 6 – 12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Includes CNC fork mount and 140cm long power cable. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. *Direct X-Lock Mounting System not compatible with all stems. Please see installation manual for stem compatibility. Specs - Max Lumens: 500 - Dimensions: 44.5 x 41 x 25mm / 1.75 x 1.61 x 0.98"

FRONT LIGHT: The Zecto Drive 250+ Front is a low-profile, high-visibility light with six ultra-bright LEDs that offer up to 250 lumens of brightness. Its six combined solid and flash output modes offer versatile options for any situation. Its highly disruptive Daytime Flash mode ensures maximum visibility during daylight hours, and the intelligent Power Indicator displays battery runtime and increases side visibility. The light is fitted with a patented 2-in-1 clip and strap mounting system, allowing easy attachment to handlebars or loops. It is rigorously tested to IPX7 Waterproofing standards to withstand even the harshest weather conditions. With a 650 mAh battery capacity, the Zecto Drive 250+ Front offers a maximum runtime of up to 40 hours in Femto mode. It also boasts waterproof USB-C charging(cable not included), making it easy to keep it charged and ready to go. REAR LIGHT: The Zecto Drive 200+ Rear is a low-profile, high-visibility light with an impressive 200 lumens of brightness. Its six combined solid and flash output modes offer versatile options for any situation. Its highly disruptive Daytime Flash mode ensures maximum visibility during daylight hours, and the intelligent Power Indicator displays battery runtime and increases side visibility. The light is fitted with a patented 2-in-1 clip and strap mounting system, allowing easy attachment to handlebars or loops. It is rigorously tested to IPX7 Waterproofing standards to withstand even the harshest weather conditions. With a 650 mAh battery capacity, the Zecto Drive 200+ Rear offers a maximum runtime of up to 35 hours in Femto mode. It also boasts USB-C waterproof charging(cable not included), making it easy to keep it charged and ready to go. - Front Light Max 250 lumens / 40-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Waterproof USB-C charging port with charge indicator - 2-in-1 clip and strap mounting system (Patented) - Multiple mounting options like dog collars or strollers - Six combined solid and flash output modes - Rigorously tested to IPX7 Waterproofing standards - 650 mAh battery capacity - Rear Light Max 200 lumens / 35-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Waterproof USB-C charging port with charge indicator - 2-in-1 clip and strap mounting system (Patented) - Multiple mounting options like dog collars or strollers - Six combined solid and flash output modes - Rigorously tested to IPX7 Waterproofing standards - 650 mAh battery capacity

Experience unparalleled illumination and versatility with the Lite Drive 1200+ Front. With eight LEDs, this light has a maximum output of 1,200 lumens and an impressive 60-hour max runtime, providing the best beam pattern for optimal visibility in even the most challenging conditions. Its waterproof USB-C 2A+ fast charging capability allows for convenient recharging(cable not included), while the CNC-machined aluminum construction with cooling fins ensures durability and efficient heat dissipation. The fresh optical design and the MOR(Maximum Optical Reflection) lens optimize light dispersion for enhanced visibility. With the optional GoPro mount and compatibility with the Infinite Light Power Pack+, this front light offers versatile mounting options and extended battery life. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. Choose from seven different output modes, from the attention-grabbing Daytime Flash Mode to the long-lasting 60-hour runtime Femto Mode, to suit your lighting needs. Illuminate your rides with confidence using the Lite Drive 1200+ Front. - Max 1,200 lumens / 60-hour max runtime - Max 1,200 lumens / 60-hour max runtime - Waterproof USB-C 2A fast charging - Daytime Flash mode with Highly Disruptive Pattern - CNC-machined aluminum construction with cooling fins - Engineered Optical Design - Infinite Light Power Pack+ Compatible for extended run times - 3800 mAh battery capacity

Lezyne Power STVZO Pro Headlight. German StVZO optimized lens with approved flood and long-range beam. High performance always-on LED delivers 310 lumens (115 Lux). Durable, heat-dissipating CNC machined aluminum construction. Auto day/night system extends battery runtime. E-bike compatible 6 – 12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Includes X-Lock stem mount and CNC-machined aluminum fork mount. 130cm power cable included.

High-performance e-bike cycling light. Durable, heat-dissipating CNC machined aluminum construction. Two ultrahigh-output LEDs deliver up to 1,000 lumens. Enhanced MOR (Maximum Optical Reflection) lens with built-in side visibility. Intelligent Auto Day/Night dim mode. E-bike compatible 6 - 12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Includes a Direct X-Lock and aluminum CNC fork mount and 140cm long power cable. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. *Direct X-Lock Mounting System not compatible with all stems. Please see installation manual for stem compatibility. Specs - Max Lumens: 1000 - Dimensions: 44.5 x 41 x 31mm / 1.75 x 1.61 x 1.22"

Featuring 800 lumens of crystal-clear illumination, the Lite Pro 800 Switch (High Volt) e-bike cycling light maximizes usable output with its enhanced Maximum Optical Reflection (MOR) lens while a compact CNC-machined aluminum body is equipped with cooling fins to maximize heat dissipation. Compatible with higher-voltage e-bike inputs (12-48v), the Lite Pro draws 8 watts during operation and easily plugs into batteries from top makers including Bosch, Shimano, and Yamaha. An integrated remote switch simplifies operation while the inclusion of both an e-bike stem mount and aluminum CNC fork mount maximize the light's versatility. A 130cm power cable is included. - Max Lumens: 800 - Weight: 173g

FRONT LIGHT: The Macro Drive 1400+ throws out a powerful 1400 lumens of output through our Tri-Focus Optics, creating an optimized beam pattern for superior visibility on the trail or road. Its waterproof USB-C charging port and 2A+ fast charging capability allows for convenient recharging(cable not included), while the CNC-machined aluminum construction with cooling fins ensures durability and efficient heat dissipation. A GoPro mount option and compatibility with the Infinite Light Power Pack+, this front light offers versatile mounting choices and extended battery life. Rigorously tested to IPX7 Waterproofing standards, it is built to withstand various weather conditions. Choose from seven different output modes, from the attention-grabbing Daytime Flash Mode to the whopping 300-hour runtime Femto Mode, to suit your lighting needs. A versatile and replaceable strap secures it to a variety of handlebar sizes. REAR LIGHT: The Strip Drive Pro 400+ Rear is a cutting-edge rear light offering ten LEDs and a maximum output of 400 lumens; it is engineered for impressive efficiency and runtime, providing the best beam pattern for optimal light dispersion in even the most challenging conditions. Plus, with an impressive 80-hour max runtime, you can rest assured that this light will last as long as you need it to. Offering seven different output modes, including the highly disruptive Daytime Flash that grabs attention and the wide-angle optics providing an impressive 270° visibility range. It features a lightweight yet durable waterproof construction, rigorously tested to IPX7 Waterproofing standards. A versatile mounting system attaches to aero or round seatposts, and the light also features USB-C waterproof charging(cable not included). Look no further, as this cycling tail light delivers unparalleled visibility-during the day or after dark. - Front Light Max 1,400 lumens / 300-hour runtime in Femto mode - Front Light Max 1,400 lumens / 300-hour runtime in Femto mode - Waterproof USB-C charging port with charge indicator - 2Amp fast charging - CNC-machined aluminum construction with cooling fins - Tri-Focus Optics are brighter with a large wide-angle pattern - Optional GoPro mount available separately - Infinite Light Power Pack+ Compatible for extended run times - Rigorously tested to IPX7 Waterproofing standards - 5200 mAh battery capacity - Rear Light Max 400 lumens / 80-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Wide Angle Optics: 270° of visibility - Waterproof USB-C charging port with charge indicator - Maximum side visibility design - Multiple mounting options with ladder strap - Lightweight and durable co-molded design - Seven combined solid and flash modes - Fits most seatpost shapes - Rigorously tested to IPX7 Waterproofing standards

Replacement bar mount for Urban lights with thumb screw for quick removal. Has a quick release design allowing the mount to quickly separate from the light. Compatible with all model year Urban lights. - Includes mount, strap, allen key, and bolt

Setup your Light & Motion Urban or Deckhand light (sold separately) wherever you can connect a GoPro mount. Use this adapter to connect your Urban or Deckhand to any GoPro mounting option.

Setup a light wherever you can connect a GoPro mount. Use this adapter to connect your Taz to any GoPro mounting option.

This mount is designed to securely attach your Light and Motion Seca, Vega, or Stella headlight (sold separately) to your helmet. With a helmet mount, the light is always pointing where you're looking.

The Stick-On Mount adheres to any flat and mildly contoured surface to provide a bar mount for your Light & Motion lighting system (sold separately). Works great for full-face helmets, paddleboards, kayaks, etc.

Direct replacement for the mount on Taz lights. The simple but thoughtfully designed system cinches light to the bar to prevent movement in bumpy terrain. - Two different rubber mount pads included to achieve the perfect fit depending if the handlebar is standard or oversize - Includes strap and mounting hardware

Rando is designed for extended adventure perfect for dynamo setups, touring, commuting, and off-grid riding. Featuring all of the safety innovations of the Urban series, the high capacity lithium ion battery has enough juice to power the light for a full 3 hours on high and a mighty 24 hours in daytime pulse mode! For those that find themselves on extended adventure, Rando is the first high-visibility bike light that allows the light to trickle-charge while in use. Perfect for dynamo setups with a USB charger or an external battery pack, cyclists can now rely on powerful safety lighting even if conventional charging is unavailable. Reliable construction is a prime consideration for extended rides and Rando’s waterproof lighting platform has a certified IP67 rating – meaning the light is certified to withstand water immersion up to a depth of 1 meter. Ride with the added assurance knowing rain or shine the light will keep performing. Whether competing in endurance racing, bike packing across the country, or commuting over 3 hours a day with no place to recharge – Rando is the ultimate long runtime lighting solution. Features - 500 Lumen Output certified to the FL-1 Standard with high powered premium CREE LED - Rando will trickle-charge in low/pulse mode for all day illumination if integrated with a USB generator hub or external battery pack - Visibility is enhanced with bright amber side lighting providing maximum safety through intersections and high-traffic areas - Micro-peened reflector optimizes the beam pattern providing a smooth, even spot void of distracting hard edges - Multiple power settings include a one-touch High/Medium toggle to efficiently decrease intensity when full power is not needed - Multi-color battery indicator is driven by custom firmware to provide accurate battery status throughout entire runtime - Mounting is simple and effective with ultra-grippy rubber ensuring light doesn’t slip on regular or oversize handlebars - Waterproof design eliminates the leading cause of bike light failure – water immersion - Includes Rando specific Micro USB cable Specifications - Lumens: 500 (high), 250 (medium), 125 (low), 125 (pulse) - Runtime: 180 min (high), 360 min (medium), 720 min (low), 1440 min (pulse) - Beam Angle: 20° (spot) - Charge Time: 360 min

Light & Motion Seca Comp 1500, Light up the whole trail with 1500 lumens of power. Designed for trails, the Seca Comp is also a superior road light with 4 modes for night and day safety and vision. - 3 CREE LEDs deliver a high power spot beam plus a wide flood beam for broad and deep coverage. - Quick handlebar mounting and easy to switch between bikes. - 3 modes for trail use, plus 9 hours of daytime safety on the road with SafePulse mode. - Waterproof: 1 meter depth rating (IP67 standard). - Impact resistant: 1 meter drop tested (FL-1 standard). - Powerful side markers for road safety can be turned off for trail rides. - Race mode offers one touch high/med toggle. - Fast USB charging with advanced internal circuitry. - Accurate battery status indicator. - GoPro mount available.

Taking the ultimate helmet lighting system – the Vis 360 – to the next level, the Vis Pro features an ultra-powerful 600-lumen headlight optimized for commuting and bright enough for twisty singletrack! The featherweight system is waterproof for all-conditions reliability and has an integrated rear light/battery pack that balances the unit on a variety of helmets. An essential setup for those requiring maximum protective visibility with powerful illumination. Featuring: - 600 Lumen Output Certified to the FL-1 Standard - Daylight Visible Pulse Mode - Integrated Battery Pack With Red Rear Lighting - Innovative Amber Sidelights Provides Critical Side Visibility at Intersections - Ultra-lightweight Setup With Easy Clip On/Off Design - Waterproof to 1 meter For All-Conditions Reliability - Accurate Battery Charge & Status Indicator - Micro USB Rechargeable Included: - Helmet Mounts & Micro USB Charging Cable

Seca 1800’s powerfully focused beam and ultra-compact size reinvents the e-Bike light. Maximizing output without bulk, the Seca features an optimized reflector with 4 Cree LEDs. Designed to integrate into popular on-board batteries such as Shimano and Bosch systems, multiple mounting options creates the perfect e-Bike lighting solution. - 1800 Lumen output certified to the FL-1 Standard - Engineered with the best CREE LED and enhanced firmware. - Custom engineered reflector optimizes the light to provide a smooth, even beam pattern that focuses the light exactly where you need it. - Beam pattern was engineered to maximize riders’ depth perception using optics that eliminates the snowball effect with a clean transition across the beam. - Designed to seamlessly integrate into an e-Bike's 6V to 14V on-board battery

Light and Motion Seca Comp 2000, with a perfect combination of high power in a compact, two-battery integrated design, is able to achieve a powerful output without quickly fading. A penetrating LED array gives a powerful spot beam in conjunction with a diffused flood beam ideal for both road and trail use to provide an exceptional range of vision for rides. Amber sidelights and a daytime pulse mode ensure road visibility and a secondary button allows the side lighting to be turned off when on the trail. - 2000 Lumen output certified to the FL-1 Standard - Engineered with a 3 LED array using the highest level CREE LEDs - Sealed, waterproof design tested to 1 meter for all conditions reliability - Beam pattern was engineered to maximize visibility at high velocity with ample beam distance lead-time and the widest beam angle for the sharpest turns - Secondary Race Mode simplifies your settings to switch between high power with 2 hours run time and low power with 4 hours - Accurate battery status indication illuminates the power button with three different colors to clearly display remaining battery life with 4 levels - Run times: 1:30 – 9 hrs over 6 modes

Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter

Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter

The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

The NiteRider Sentry Aero 260 Standard and Aero Seat Post Straps provide options for a proper and correct fitment onto standard and aero seat posts. Installation is easy with the loop around and hook design. - System compatibility: Sentry Aero 260 Daylight Visible Tail Light only - Includes: (1) Standard Seat Post Strap, (1) Aero Seat Post Strap - Standard Strap: 3.625" length with comfortable stretch to 5.5" length, fits 27.2mm seat post - Aero Strap: 5.5" length with comfortable stretch to 9" length, fits 30.9 or 31.6mm seat post

The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.

The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb

If you're looking to mount your Lumina and Mako series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. System Compatibility - Lumina Series - Mako Series

The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)

The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series

For those that ride with the sleek performance of Aero handlebars, NiteRider offers a light mounting solution that allows for increased visibility and safety while you're out clocking in those high-speed miles. With the proper strap tension set, the Aero Handlebar Mount is secured in to place delivering a high degree of stability by way of the soft rubber pad under the mount. Enjoy all the benefits of Aero handlebars, while increasing your road visibility with NiteRider Lumina or Mako Series lights and the Aero Handlebar Mount. Fits all Aero style handlebars. SYSTEM COMPATIBILITY - Lumina Series - Mako Series - MiNewt Cordless Series

Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series

The NiteRider Double Taillight Rack Mount allows for the installation of 2 NiteRider taillights. It attaches securely with the rack mount for that perfect fit. It features a quick release tab on each mounting point that allows you to remove just your taillight, leaving the whole mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. SYSTEM COMPATIBILITY - Sentinel - Omega 330 - Solas - Sabre - CherryBomb - TL 5.0 SL - Vmax+ 150 NOT COMPATIBLE WITH Emax+ 150, OMEGA 300, SENTRY AERO 260, AND BULLET 200 TAILLIGHTS

The NiteRider Double Taillight Seat Post Mount allows for the installation of 2 NiteRider taillights. It attaches securely with the clamp mount and rubber shims for that perfect fit. Fits seat posts with a 22mm-34.9mm diameter. It features a quick release tab on each mounting point that allows you to remove just your taillight, leaving the whole mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. SYSTEM COMPATIBILITY - Sentinel - Omega 330 - Solas - Sabre - CherryBomb - TL 5.0 SL - Vmax+ 150 NOT COMPATIBLE WITH Emax+ 150, OMEGA 300, SENTRY AERO 260, AND BULLET 200 TAILLIGHTS